IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v211y2020ics0360544220315668.html
   My bibliography  Save this article

Parametric study of gamma-type free piston stirling engine using nonlinear thermodynamic-dynamic coupled model

Author

Listed:
  • Ye, Wenlian
  • Zhang, Ting
  • Wang, Xiaojun
  • Liu, Yingwen
  • Chen, Pengfan

Abstract

A reliable thermodynamic-dynamic coupled model for a gamma-type FPSE possessing nonlinear load damping coefficient has been proposed in this study. Simultaneously, the experimental results are compared with the model and a satisfactory agreement is obtained. The output power is predicted with less than 5% error under different hot-end temperatures. Then the amplitude of displacer and piston with time at different pistons’ positions are obtained, and the effects of load damping and nonlinear coefficients on the amplitude values of two pistons and output power are presented. Finally, a simulation study is carried out to investigate the sensitivity of thermodynamic-dynamic parameters to the amplitude of two pistons, operating frequency and output power, and the fitting formulas for evaluating the performance of FPSE are presented. It is found that the initial positions of two pistons have little effect on pistons’ amplitude in the FPSE nonlinear system. High charge pressure, hot-end temperature, and spring stiffness of the displacer can increase the output power and amplitude of the pistons while other parameters have a negative effect on them. The fitting equations have high accuracy. This work provides a reliable model and theoretical guidance for improving the FPSE’s performance.

Suggested Citation

  • Ye, Wenlian & Zhang, Ting & Wang, Xiaojun & Liu, Yingwen & Chen, Pengfan, 2020. "Parametric study of gamma-type free piston stirling engine using nonlinear thermodynamic-dynamic coupled model," Energy, Elsevier, vol. 211(C).
    • Handle: RePEc:eee:energy:v:211:y:2020:i:c:s0360544220315668
    DOI: 10.1016/j.energy.2020.118458
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220315668
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118458?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ye, Wenlian & Wang, Xiaojun & Liu, Yingwen, 2020. "Application of artificial neural network for predicting the dynamic performance of a free piston Stirling engine," Energy, Elsevier, vol. 194(C).
    2. Ahmadi, Mohammad H. & Ahmadi, Mohammad-Ali & Pourfayaz, Fathollah, 2017. "Thermal models for analysis of performance of Stirling engine: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P1), pages 168-184.
    3. Mou, Jian & Hong, Guotong, 2017. "Startup mechanism and power distribution of free piston Stirling engine," Energy, Elsevier, vol. 123(C), pages 655-663.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xiao, Lei & Wu, Zhanghua & Zhu, Qilu & Jia, Zilong & Zhao, Dong & Hu, Jianying & Zhu, Shunmin & Luo, Ercang, 2023. "Dynamic response of a dual-opposed free-piston Stirling generator," Energy, Elsevier, vol. 284(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Pengfan & Yang, Peng & Liu, Liu & Liu, Yingwen, 2021. "Parametric investigation of the phase characteristics of a beta-type free piston Stirling engine based on a thermodynamic-dynamic coupled model," Energy, Elsevier, vol. 219(C).
    2. Rahmati, A. & Varedi-Koulaei, S.M. & Ahmadi, M.H. & Ahmadi, H., 2022. "Dynamic synthesis of the alpha-type stirling engine based on reducing the output velocity fluctuations using Metaheuristic algorithms," Energy, Elsevier, vol. 238(PB).
    3. Qiu, Hao & Wang, Kai & Yu, Peifeng & Ni, Mingjiang & Xiao, Gang, 2021. "A third-order numerical model and transient characterization of a β-type Stirling engine," Energy, Elsevier, vol. 222(C).
    4. Yu, Minjie & Xu, Lei & Cui, Haichuan & Liu, Zhichun & Liu, Wei, 2024. "Characteristics and potential of a novel inclined-flow stirling regenerator constructed by sinusoidal corrugated channels," Energy, Elsevier, vol. 288(C).
    5. Yousefzadeh, H. & Tavakolpour-Saleh, A.R., 2021. "A novel unified dynamic-thermodynamic method for estimating damping and predicting performance of kinematic Stirling engines," Energy, Elsevier, vol. 224(C).
    6. Xu, Haoran & Chen, Lingen & Ge, Yanlin & Feng, Huijun, 2022. "Multi-objective optimization of Stirling heat engine with various heat and mechanical losses," Energy, Elsevier, vol. 256(C).
    7. Ferreira, Ana Cristina & Silva, João & Teixeira, Senhorinha & Teixeira, José Carlos & Nebra, Silvia Azucena, 2020. "Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass," Renewable Energy, Elsevier, vol. 154(C), pages 581-597.
    8. Jacek Kropiwnicki & Mariusz Furmanek, 2020. "A Theoretical and Experimental Study of Moderate Temperature Alfa Type Stirling Engines," Energies, MDPI, vol. 13(7), pages 1-21, April.
    9. Carmela Perozziello & Lavinia Grosu & Bianca Maria Vaglieco, 2021. "Free-Piston Stirling Engine Technologies and Models: A Review," Energies, MDPI, vol. 14(21), pages 1-22, October.
    10. Jose Egas & Don M. Clucas, 2018. "Stirling Engine Configuration Selection," Energies, MDPI, vol. 11(3), pages 1-22, March.
    11. Ayodeji Sowale & Edward J. Anthony & Athanasios John Kolios, 2018. "Optimisation of a Quasi-Steady Model of a Free-Piston Stirling Engine," Energies, MDPI, vol. 12(1), pages 1-17, December.
    12. Bataineh, Khaled, 2018. "Mathematical formulation of alpha -type Stirling engine with Ross Yoke mechanism," Energy, Elsevier, vol. 164(C), pages 1178-1199.
    13. Schneider, T. & Müller, D. & Karl, J., 2020. "A review of thermochemical biomass conversion combined with Stirling engines for the small-scale cogeneration of heat and power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    14. Solmaz, Hamit & Safieddin Ardebili, Seyed Mohammad & Aksoy, Fatih & Calam, Alper & Yılmaz, Emre & Arslan, Muhammed, 2020. "Optimization of the operating conditions of a beta-type rhombic drive stirling engine by using response surface method," Energy, Elsevier, vol. 198(C).
    15. Uchman, Wojciech & Kotowicz, Janusz & Li, Kin Fun, 2021. "Evaluation of a micro-cogeneration unit with integrated electrical energy storage for residential application," Applied Energy, Elsevier, vol. 282(PA).
    16. Tavakolpour-Saleh, A.R. & Zare, Shahryar, 2021. "Justifying performance of thermo-acoustic Stirling engines based on a novel lumped mechanical model," Energy, Elsevier, vol. 227(C).
    17. Chen, Pengfan & Zhong, Geyu & Niu, Yafeng & Liu, Yingwen, 2022. "Performance optimization of a free piston stirling engine using multi-section regenerators based on the response surface methodology," Energy, Elsevier, vol. 261(PB).
    18. Jiang, Han & Xi, Zhongli & A. Rahman, Anas & Zhang, Xiaoqing, 2020. "Prediction of output power with artificial neural network using extended datasets for Stirling engines," Applied Energy, Elsevier, vol. 271(C).
    19. Yang, Hang-Suin & Cheng, Chin-Hsiang & Huang, Shang-Ting, 2018. "A complete model for dynamic simulation of a 1-kW class beta-type Stirling engine with rhombic-drive mechanism," Energy, Elsevier, vol. 161(C), pages 892-906.
    20. Skorek-Osikowska, Anna & Kotowicz, Janusz & Uchman, Wojciech, 2017. "Thermodynamic assessment of the operation of a self-sufficient, biomass based district heating system integrated with a Stirling engine and biomass gasification," Energy, Elsevier, vol. 141(C), pages 1764-1778.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:211:y:2020:i:c:s0360544220315668. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.