IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v205y2020ics0360544220311658.html
   My bibliography  Save this article

Influence of injection scheme on flame characteristics in partially premixed combustion

Author

Listed:
  • Shilong, Zhao
  • Yuxin, Fan
  • Deng, Tiantai
  • Crookes, Danny

Abstract

A remodelled flame holding device was integrated with injection, which could meet the demand of compact design and better resisting thermal ablation. Simplified model was applied to simulate flow field using CFD and was well verified, and the deviation was within 3%. The optimized stabilizer with close-coupled injection was put forward, its fuel distribution and flame expansion were improved with the growth of velocity. And the greater turbulent intensity was beneficial for droplets breakup and fuel/air mixing. Additionally, the growth of temperature enlarged flame expansion due to its bigger reaction rates. To more specifically illustrate combustion characteristics, an enhanced image processing method through removing flame radiation was developed to detect real flame boundary. Quantitative analysis of flame expansion was investigated to reveal the working mechanism of integrated scheme. Moreover, the influences of injection locations including prepositive and postpositive injection on flame expansion were investigated and the prepositive injection achieve up to 10% larger flame expansion. Integrated scheme was extremely important for next generation of propulsion and power system.

Suggested Citation

  • Shilong, Zhao & Yuxin, Fan & Deng, Tiantai & Crookes, Danny, 2020. "Influence of injection scheme on flame characteristics in partially premixed combustion," Energy, Elsevier, vol. 205(C).
    • Handle: RePEc:eee:energy:v:205:y:2020:i:c:s0360544220311658
    DOI: 10.1016/j.energy.2020.118058
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220311658
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118058?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Yan, W.H. & Hao, F. & Yin, C.M., 2018. "Flow field and combustion characteristics of integrated combustion mode using cavity with low flow resistance for gas turbine engines," Energy, Elsevier, vol. 165(PA), pages 979-996.
    2. Zhang, Rongchun & Xu, Quanyong & Fan, Weijun, 2018. "Effect of swirl field on the fuel concentration distribution and combustion characteristics in gas turbine combustor with cavity," Energy, Elsevier, vol. 162(C), pages 83-98.
    3. Park, Sang-Kyoo & Yang, Hei-Cheon, 2018. "An experimental investigation of the flow and mass transfer behavior in a vertical aeration process with orifice ejector," Energy, Elsevier, vol. 160(C), pages 954-964.
    4. Zhang, R.C. & Fan, W.J. & Xing, F. & Song, S.W. & Shi, Q. & Tian, G.H. & Tan, W.L., 2015. "Experimental study of slight temperature rise combustion in trapped vortex combustors for gas turbines," Energy, Elsevier, vol. 93(P2), pages 1535-1547.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Yuqian & Fan, Yuxin & Han, Qixiang, 2022. "Experimental investigation of thermal protection performance of bluff-body flameholder in augmented combustor under air jet cooling," Energy, Elsevier, vol. 254(PB).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Huang, X.Y. & Fan, X.Q., 2019. "Influence of flame stabilization and fuel injection modes on the flow and combustion characteristics of gas turbine combustor with cavity," Energy, Elsevier, vol. 189(C).
    2. Zhang, R.C. & Huang, X.Y. & Fan, W.J. & Bai, N.J., 2019. "Influence of injection mode on the combustion characteristics of slight temperature rise combustion in gas turbine combustor with cavity," Energy, Elsevier, vol. 179(C), pages 603-617.
    3. Yang, Xiao & He, Zhihong & Qiu, Penghua & Dong, Shikui & Tan, Heping, 2019. "Numerical investigations on combustion and emission characteristics of a novel elliptical jet-stabilized model combustor," Energy, Elsevier, vol. 170(C), pages 1082-1097.
    4. Zhang, R.C. & Bai, N.J. & Fan, W.J. & Yan, W.H. & Hao, F. & Yin, C.M., 2018. "Flow field and combustion characteristics of integrated combustion mode using cavity with low flow resistance for gas turbine engines," Energy, Elsevier, vol. 165(PA), pages 979-996.
    5. Miao, Junjie & Fan, Yuxin & Wu, Weiqiu & Zhao, Shilong, 2021. "Effect of air-assistant on ignition and flame-holding characteristics in a cavity-strut based combustor," Applied Energy, Elsevier, vol. 283(C).
    6. Joo, Seongpil & Choi, Jongwun & Lee, Min Chul & Kim, Namkeun, 2021. "Prognosis of combustion instability in a gas turbine combustor using spectral centroid & spread," Energy, Elsevier, vol. 224(C).
    7. Enagi, Ibrahim I. & Al-attab, K.A. & Zainal, Z.A., 2018. "Liquid biofuels utilization for gas turbines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 43-55.
    8. Fang, Lide & Liu, Yueyuan & Zheng, Meng & Liu, Xu & Lan, Kang & Wang, Fan & Yan, Xiaoli, 2023. "A new type of velocity averaging tube vortex flow sensor and measurement model of mass flow rate," Energy, Elsevier, vol. 283(C).
    9. Li, Mingyu & Wang, Qian & He, Xiaomin & Xiao, Jiankun & Ma, Heng, 2022. "Effects of fuel injection on the combustion and emission performance of a trapped vortex combustor," Energy, Elsevier, vol. 252(C).
    10. Xiangzhong Jia & Yong Shan & Xingping Xu & Jingzhou Zhang & Xiaoming Tan, 2021. "Effects of Bypass Flow Distribution on Cold Flow Characteristics of Integrated Afterburner," Energies, MDPI, vol. 14(18), pages 1-17, September.
    11. Besagni, Giorgio, 2019. "Ejectors on the cutting edge: The past, the present and the perspective," Energy, Elsevier, vol. 170(C), pages 998-1003.
    12. Tyliszczak, Artur & Boguslawski, Andrzej & Nowak, Dariusz, 2016. "Numerical simulations of combustion process in a gas turbine with a single and multi-point fuel injection system," Applied Energy, Elsevier, vol. 174(C), pages 153-165.
    13. Shilong, Zhao & Yuxin, Fan, 2020. "Experimental and numerical study on the flame characteristics and cooling effectiveness of air-cooled flame holder," Energy, Elsevier, vol. 209(C).
    14. Zhang, Rongchun & Xu, Quanyong & Fan, Weijun, 2018. "Effect of swirl field on the fuel concentration distribution and combustion characteristics in gas turbine combustor with cavity," Energy, Elsevier, vol. 162(C), pages 83-98.
    15. Gonca, Guven, 2017. "Exergetic and ecological performance analyses of a gas turbine system with two intercoolers and two re-heaters," Energy, Elsevier, vol. 124(C), pages 579-588.
    16. Li, Mingyu & He, Xiaomin & Zhao, Yuling & Jin, Yi & Ge, Zhenghao & Sun, Yuan, 2017. "Dome structure effects on combustion performance of a trapped vortex combustor," Applied Energy, Elsevier, vol. 208(C), pages 72-82.
    17. Shilong, Zhao & Yuxin, Fan, 2020. "Experimental and numerical study on fuel distribution and flame expansion of the enhanced flame holding devices," Energy, Elsevier, vol. 203(C).
    18. Zhang, R.C. & Hao, F. & Fan, W.J., 2018. "Combustion and stability characteristics of ultra-compact combustor using cavity for gas turbines," Applied Energy, Elsevier, vol. 225(C), pages 940-954.
    19. Huang, Yakun & He, Xiaomin & Zhang, Huangwei & Zhu, Zhixin & Zhu, Huanyu, 2022. "Flame stability optimization of cavity primary air-jet form in an augmentor," Energy, Elsevier, vol. 239(PA).
    20. Li, Mingyu & He, Xiaomin & Zhao, Yuling & Jin, Yi & Yao, Kanghong & Ge, Zhenghao, 2018. "Performance enhancement of a trapped-vortex combustor for gas turbine engines using a novel hybrid-atomizer," Applied Energy, Elsevier, vol. 216(C), pages 286-295.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:205:y:2020:i:c:s0360544220311658. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.