IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v153y2018icp836-848.html
   My bibliography  Save this article

A new type of hydrokinetic accumulator and its simulation in hydraulic lift with energy recovery system

Author

Listed:
  • Latas, Waldemar
  • Stojek, Jerzy

Abstract

The article presents a model and a simulation study of a new type of hydrokinetic accumulator with increased energy storage density. The basic elements of the accumulator are: a flywheel of variable moment of inertia (due to inflow or outflow of hydraulic fluid) and a variable displacement pump/motor. The first part of the article describes the construction and operation principles of the developed accumulator with three specified work modes. A mathematical model of the presented hydrokinetic accumulator and its simulation in a hydrostatic lift system with energy recovery are given. The results of the numerical simulations carried out during charging and discharging of the accumulator (i.e. values of the stored kinetic and potential energy and chosen working parameters) are presented. It is shown that, due to energy storage and extraction, in both hydrostatic and rotating kinetic domains, charging and discharging may be decoupled from pressure level. Additionally, the accumulator has the ability to control the pressure in the hydraulic system. An example of the control algorithm is also presented in the paper.

Suggested Citation

  • Latas, Waldemar & Stojek, Jerzy, 2018. "A new type of hydrokinetic accumulator and its simulation in hydraulic lift with energy recovery system," Energy, Elsevier, vol. 153(C), pages 836-848.
    • Handle: RePEc:eee:energy:v:153:y:2018:i:c:p:836-848
    DOI: 10.1016/j.energy.2018.04.040
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218306443
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.04.040?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hui, Sun & Lifu, Yang & Junqing, Jing, 2010. "Hydraulic/electric synergy system (HESS) design for heavy hybrid vehicles," Energy, Elsevier, vol. 35(12), pages 5328-5335.
    2. Van de Ven, James D., 2013. "Constant pressure hydraulic energy storage through a variable area piston hydraulic accumulator," Applied Energy, Elsevier, vol. 105(C), pages 262-270.
    3. Puddu, Pierpaolo & Paderi, Maurizio, 2013. "Hydro-pneumatic accumulators for vehicles kinetic energy storage: Influence of gas compressibility and thermal losses on storage capability," Energy, Elsevier, vol. 57(C), pages 326-335.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, He & Chen, Zhen & Huang, Jiahai, 2021. "Improvement of vibration frequency and energy efficiency in the uniaxial electro-hydraulic shaking tables for sinusoidal vibration waveform," Energy, Elsevier, vol. 218(C).
    2. Yan, Xiaopeng & Chen, Baijin & Yin, Fanglong & Ji, Hui & Ma, Zhonghai & Nie, Songlin, 2023. "Energy optimization of main hydraulic system in a forging press by simulation and experimental methods," Energy, Elsevier, vol. 277(C).
    3. Mendoza Castellanos, Luis Sebastián & Galindo Noguera, Ana Lisbeth & Gutiérrez Velásquez, Elkin I. & Caballero, Gaylord Enrique Carrillo & Silva Lora, Electo Eduardo & Melian Cobas, Vladimir Rafael, 2020. "Mathematical modeling of a system composed of parabolic trough solar collectors integrated with a hydraulic energy storage system," Energy, Elsevier, vol. 208(C).
    4. Do, Tri Cuong & Dang, Tri Dung & Dinh, Truong Quang & Ahn, Kyoung Kwan, 2021. "Developments in energy regeneration technologies for hydraulic excavators: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    5. Nie, Chunhui & Shao, Yimin & Mechefske, Chris K. & Cheng, Min & Wang, Liming, 2021. "Power distribution method for a parallel hydraulic-pneumatic hybrid system using a piecewise function," Energy, Elsevier, vol. 233(C).
    6. Lukasz Stawinski & Jakub Zaczynski & Adrian Morawiec & Justyna Skowronska & Andrzej Kosucki, 2021. "Energy Consumption Structure and Its Improvement of Low-Lifting Capacity Scissor Lift," Energies, MDPI, vol. 14(5), pages 1-14, March.
    7. Yan, Xiaopeng & Chen, Baijin, 2021. "Analysis of a novel energy-efficient system with 3-D vertical structure for hydraulic press," Energy, Elsevier, vol. 218(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pavković, D. & Hoić, M. & Deur, J. & Petrić, J., 2014. "Energy storage systems sizing study for a high-altitude wind energy application," Energy, Elsevier, vol. 76(C), pages 91-103.
    2. Wu, Wei & Hu, Jibin & Jing, Chongbo & Jiang, Zhonglin & Yuan, Shihua, 2014. "Investigation of energy efficient hydraulic hybrid propulsion system for automobiles," Energy, Elsevier, vol. 73(C), pages 497-505.
    3. Ramakrishnan, R. & Hiremath, Somashekhar S. & Singaperumal, M., 2014. "Design strategy for improving the energy efficiency in series hydraulic/electric synergy system," Energy, Elsevier, vol. 67(C), pages 422-434.
    4. Yan, Xiaopeng & Chen, Baijin, 2021. "Analysis of a novel energy-efficient system with 3-D vertical structure for hydraulic press," Energy, Elsevier, vol. 218(C).
    5. Barbosa, Társis Prado & Eckert, Jony Javorski & Roso, Vinícius Rückert & Pujatti, Fabrício José Pacheco & da Silva, Leonardo Adolpho Rodrigues & Horta Gutiérrez, Juan Carlos, 2021. "Fuel saving and lower pollutants emissions using an ethanol-fueled engine in a hydraulic hybrid passengers vehicle," Energy, Elsevier, vol. 235(C).
    6. Yu, Jin & Song, Yurun & Zhang, Huasen & Dong, Xiaohan, 2022. "Novel design of compound coupled hydro-mechanical transmission on heavy-duty vehicle for energy recycling," Energy, Elsevier, vol. 239(PD).
    7. Donglai Zhao & Wenjie Ge & Xiaojuan Mo & Bo Liu & Dianbiao Dong, 2019. "Design of A New Hydraulic Accumulator for Transient Large Flow Compensation," Energies, MDPI, vol. 12(16), pages 1-17, August.
    8. Puddu, Pierpaolo & Paderi, Maurizio, 2013. "Hydro-pneumatic accumulators for vehicles kinetic energy storage: Influence of gas compressibility and thermal losses on storage capability," Energy, Elsevier, vol. 57(C), pages 326-335.
    9. Zhang, Shuo & Xiong, Rui & Zhang, Chengning & Sun, Fengchun, 2016. "An optimal structure selection and parameter design approach for a dual-motor-driven system used in an electric bus," Energy, Elsevier, vol. 96(C), pages 437-448.
    10. Kwon, Hyukjoon & Ivantysynova, Monika, 2021. "Experimental and theoretical studies on energy characteristics of hydraulic hybrids for thermal management," Energy, Elsevier, vol. 223(C).
    11. He, Xiangyu & Liu, Hao & He, Shanghong & Hu, Bili & Xiao, Guangxin, 2019. "Research on the energy efficiency of energy regeneration systems for a battery-powered hydrostatic vehicle," Energy, Elsevier, vol. 178(C), pages 400-418.
    12. Hongwang Du & Wei Liu & Xin Bian & Wei Xiong, 2022. "Energy-Saving for Industrial Pneumatic Actuation Systems by Exhausted Air Reuse Based on a Constant Pressure Elastic Accumulator," Sustainability, MDPI, vol. 14(6), pages 1-13, March.
    13. Shilei Zhou & Paul Walker & Yang Tian & Cong Thanh Nguyen & Nong Zhang, 2021. "Comparison on Energy Economy and Vibration Characteristics of Electric and Hydraulic in-Wheel Drive Vehicles," Energies, MDPI, vol. 14(8), pages 1-15, April.
    14. Li, Chengchen & Wang, Huanran & He, Xin & Zhang, Yan, 2022. "Experimental and thermodynamic investigation on isothermal performance of large-scaled liquid piston," Energy, Elsevier, vol. 249(C).
    15. Bravo, Rafael Rivelino Silva & De Negri, Victor Juliano & Oliveira, Amir Antonio Martins, 2018. "Design and analysis of a parallel hydraulic – pneumatic regenerative braking system for heavy-duty hybrid vehicles," Applied Energy, Elsevier, vol. 225(C), pages 60-77.
    16. Cummins, Joshua J. & Nash, Christopher J. & Thomas, Seth & Justice, Aaron & Mahadevan, Sankaran & Adams, Douglas E. & Barth, Eric J., 2017. "Energy conservation in industrial pneumatics: A state model for predicting energetic savings using a novel pneumatic strain energy accumulator," Applied Energy, Elsevier, vol. 198(C), pages 239-249.
    17. Qu, Shaoyang & Fassbender, David & Vacca, Andrea & Busquets, Enrique, 2021. "A high-efficient solution for electro-hydraulic actuators with energy regeneration capability," Energy, Elsevier, vol. 216(C).
    18. Gong, Jun & Zhang, Daqing & Guo, yong & Liu, Changsheng & Zhao, Yuming & Hu, Peng & Quan, weicai, 2019. "Power control strategy and performance evaluation of a novel electro-hydraulic energy-saving system," Applied Energy, Elsevier, vol. 233, pages 724-734.
    19. Kwon, Hyukjoon & Sprengel, Michael & Ivantysynova, Monika, 2016. "Thermal modeling of a hydraulic hybrid vehicle transmission based on thermodynamic analysis," Energy, Elsevier, vol. 116(P1), pages 650-660.
    20. Mirzaei, Amin & Jusoh, Awang & Salam, Zainal, 2012. "Design and implementation of high efficiency non-isolated bidirectional zero voltage transition pulse width modulated DC–DC converters," Energy, Elsevier, vol. 47(1), pages 358-369.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:153:y:2018:i:c:p:836-848. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.