IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v341y2023ics0306261923004658.html
   My bibliography  Save this article

Halloysite-based aerogels for efficient encapsulation of phase change materials with excellent solar energy storage and retrieval performance

Author

Listed:
  • Ma, Xuke
  • Yang, Chunyan
  • Feng, Xuejiao
  • Shang, Huishan
  • Zhao, Yafei
  • Zhang, Bing

Abstract

Developing low-cost composite phase change materials with good shape stability, excellent mechanical strength, high thermal conductivity, large encapsulation ratio, strong light absorption and eminent solar-to-thermal conversion capacity is of great challenge to solve the scaling-up related issues of organic solid–liquid phase change materials during the utilization of solar energy. In this work, halloysite/poly(vinyl alcohol) and halloysite/poly(vinyl alcohol)/reduced graphene oxide aerogels with rich three-dimensional honeycomb structure were prepared by a freezing and freeze-drying method, which can significantly promote the encapsulation ratio of lauric acid in the pores of both aerogels and halloysite nanotube. Halloysite nanotube with high aspect ratio can improve the compressive strength of the aerogels and shape stability of the composite phase change materials, while reduced graphene oxide can reinforce the thermal conductivity and light absorption ability. After encapsulation of lauric acid, the halloysite/poly(vinyl alcohol) 9:1 and halloysite/poly(vinyl alcohol)/reduced graphene oxide 9:1 phase change composites demonstrate extraordinarily high latent heat of 195.4 J/g and 197.0 J/g, respectively, leading to high encapsulation ratios of 97.2 % and 98.1 % respectively, accompanied by good chemical and thermal stability over 300 thermal cycles. The thermal conductivity of lauric acid@halloysite/poly(vinyl alcohol)/reduced graphene oxide is remarkably elevated to 0.343 W/m∙K, exceeding 39.4 % that of pure lauric acid (0.246 W/m∙K). Besides, the lauric acid@halloysite/poly(vinyl alcohol)/reduced graphene oxide realizes a conspicuous solar-to-thermal conversion with solar absorption capacity of 95 % throughout the full spectrum of solar light. The marvelous improvement in the solar-to-thermal conversion efficiency can be attributed to thermally conductive interconnected network of halloysite nanotube and reduced graphene oxide. Thus, lauric acid@halloysite/poly(vinyl alcohol)/reduced graphene oxide and lauric acid@halloysite/poly(vinyl alcohol) are tentatively used in the catalytic hydrolysis of ammonia borane, and they can efficiently harvest, convert and store solar energy in the form of thermal energy and release it for the reaction, which obviously accelerates the extent of reaction with turnover frequency increasing from 29.50 (molH2/molcatalyst·min) at 25 °C to 59.18 and 41.74 (molH2/molcatalyst·min) under the heating of solar energy stored lauric acid@halloysite/poly(vinyl alcohol)/reduced graphene oxide and lauric acid@halloysite/poly(vinyl alcohol), respectively. This work paves a way for fabricating halloysite-based aerogel and composite phase change materials for thermal/solar energy saving application.

Suggested Citation

  • Ma, Xuke & Yang, Chunyan & Feng, Xuejiao & Shang, Huishan & Zhao, Yafei & Zhang, Bing, 2023. "Halloysite-based aerogels for efficient encapsulation of phase change materials with excellent solar energy storage and retrieval performance," Applied Energy, Elsevier, vol. 341(C).
    • Handle: RePEc:eee:appene:v:341:y:2023:i:c:s0306261923004658
    DOI: 10.1016/j.apenergy.2023.121101
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923004658
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.121101?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Han, Weifang & Ge, Chunhua & Zhang, Rui & Ma, Zhiyan & Wang, Lixia & Zhang, Xiangdong, 2019. "Boron nitride foam as a polymer alternative in packaging phase change materials: Synthesis, thermal properties and shape stability," Applied Energy, Elsevier, vol. 238(C), pages 942-951.
    2. Peng, Benli & Huang, Guanghan & Wang, Pengtao & Li, Wenming & Chang, Wei & Ma, Jiaxuan & Li, Chen, 2019. "Effects of thermal conductivity and density on phase change materials-based thermal energy storage systems," Energy, Elsevier, vol. 172(C), pages 580-591.
    3. Zhao, Yafei & Kong, Weixiao & Jin, Zunlong & Fu, Ye & Wang, Wencai & Zhang, Yatao & Liu, Jindun & Zhang, Bing, 2018. "Storing solar energy within Ag-Paraffin@Halloysite microspheres as a novel self-heating catalyst," Applied Energy, Elsevier, vol. 222(C), pages 180-188.
    4. Zhang, Long & Zhou, Kechao & Wei, Quiping & Ma, Li & Ye, Wentao & Li, Haichao & Zhou, Bo & Yu, Zhiming & Lin, Cheng-Te & Luo, Jingting & Gan, Xueping, 2019. "Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage," Applied Energy, Elsevier, vol. 233, pages 208-219.
    5. Zhao, Liqing & Wei, Qinghe & Zhang, Lili & Zhao, Yafei & Zhang, Bing, 2021. "NiCo alloy decorated on porous N-doped carbon derived from ZnCo-ZIF as highly efficient and magnetically recyclable catalyst for hydrogen evolution from ammonia borane," Renewable Energy, Elsevier, vol. 173(C), pages 273-282.
    6. Zhang, Xialan & Lin, Qilang & Luo, Huijun & Luo, Shiyuan, 2020. "Three-dimensional graphitic hierarchical porous carbon/stearic acid composite as shape-stabilized phase change material for thermal energy storage," Applied Energy, Elsevier, vol. 260(C).
    7. Zhongyong Wang & Zhen Tong & Qinxian Ye & Hang Hu & Xiao Nie & Chen Yan & Wen Shang & Chengyi Song & Jianbo Wu & Jun Wang & Hua Bao & Peng Tao & Tao Deng, 2017. "Dynamic tuning of optical absorbers for accelerated solar-thermal energy storage," Nature Communications, Nature, vol. 8(1), pages 1-9, December.
    8. Yang, Haiyue & Wang, Siyuan & Wang, Xin & Chao, Weixiang & Wang, Nan & Ding, Xiaolun & Liu, Feng & Yu, Qianqian & Yang, Tinghan & Yang, Zhaolin & Li, Jian & Wang, Chengyu & Li, Guoliang, 2020. "Wood-based composite phase change materials with self-cleaning superhydrophobic surface for thermal energy storage," Applied Energy, Elsevier, vol. 261(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wu, Taofen & Wu, Dan & Deng, Yong & Luo, Dajun & Wu, Fuzhong & Dai, Xinyi & Lu, Jia & Sun, Shuya, 2024. "Three-dimensional network-based composite phase change materials: Construction, structure, performance and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yafang Zhang & Jiebin Tang & Jialin Chen & Yuhai Zhang & Xiangxiang Chen & Meng Ding & Weijia Zhou & Xijin Xu & Hong Liu & Guobin Xue, 2023. "Accelerating the solar-thermal energy storage via inner-light supplying with optical waveguide," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    2. Gowthami, D. & Sharma, R.K., 2023. "Influence of Hydrophilic and Hydrophobic modification of the porous matrix on the thermal performance of form stable phase change materials: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    3. Shaoying Li & Zhongquan Qu & Zhiming Song, 2020. "A Multifunctional Combination Incubator," Energies, MDPI, vol. 13(24), pages 1-22, December.
    4. Li, Xinghui & Zhu, Ziqi & Yang, Pei & You, Zhenping & Dong, Yue & Tang, Miao & Chen, Minzhi & Zhou, Xiaoyan, 2021. "Carbonized wood loaded with carbon dots for preparation long-term shape-stabilized composite phase change materials with superior thermal energy conversion capacity," Renewable Energy, Elsevier, vol. 174(C), pages 19-30.
    5. Dong, Kaixin & Sheng, Nan & Zou, Deqiu & Wang, Cheng & Shimono, Kenji & Akiyama, Tomohiro & Nomura, Takahiro, 2020. "A high-thermal-conductivity, high-durability phase-change composite using a carbon fibre sheet as a supporting matrix," Applied Energy, Elsevier, vol. 264(C).
    6. Yan, Xiaoxin & Feng, Yanhui & Qiu, Lin & Zhang, Xinxin, 2021. "Thermal conductivity and phase change characteristics of hierarchical porous diamond/erythritol composite phase change materials," Energy, Elsevier, vol. 233(C).
    7. Yao, Haichen & Liu, Xianglei & Luo, Qingyang & Xu, Qiao & Tian, Yang & Ren, Tianze & Zheng, Hangbin & Gao, Ke & Dang, Chunzhuo & Xuan, Yimin & Liu, Zhan & Yang, Xiaohu & Ding, Yulong, 2022. "Experimental and numerical investigations of solar charging performances of 3D porous skeleton based latent heat storage devices," Applied Energy, Elsevier, vol. 320(C).
    8. Komova, O.V. & Simagina, V.I. & Butenko, V.R. & Odegova, G.V. & Bulavchenko, O.A. & Nikolaeva, O.A. & Ozerova, A.M. & Lipatnikova, I.L. & Tayban, E.S. & Mukha, S.A. & Netskina, O.V., 2022. "Dehydrogenation of ammonia borane recrystallized by different techniques," Renewable Energy, Elsevier, vol. 184(C), pages 460-472.
    9. Hailei Zhang & Bo Zhang & Chongyang Cai & Kaiming Zhang & Yu Wang & Yuan Wang & Yanmin Yang & Yonggang Wu & Xinwu Ba & Richard Hoogenboom, 2024. "Water-dispersible X-ray scintillators enabling coating and blending with polymer materials for multiple applications," Nature Communications, Nature, vol. 15(1), pages 1-11, December.
    10. Jiang, Liang & Lei, Yuan & Liu, Qinfeng & Lei, Jingxin, 2020. "Polyethylene glycol based self-luminous phase change materials for both thermal and light energy storage," Energy, Elsevier, vol. 193(C).
    11. Wu, Yubo & Du, Jianqiang & Liu, Guangxin & Ma, Danzhu & Jia, Fengrui & Klemeš, Jiří Jaromír & Wang, Jin, 2022. "A review of self-cleaning technology to reduce dust and ice accumulation in photovoltaic power generation using superhydrophobic coating," Renewable Energy, Elsevier, vol. 185(C), pages 1034-1061.
    12. Fan, Zhaohui & Gao, Renjing & Liu, Shutian, 2022. "Thermal conductivity enhancement and thermal saturation elimination designs of battery thermal management system for phase change materials based on triply periodic minimal surface," Energy, Elsevier, vol. 259(C).
    13. Kenzhekhanov, Sultan & Memon, Shazim Ali & Adilkhanova, Indira, 2020. "Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate," Energy, Elsevier, vol. 192(C).
    14. Zhang, Yun & Zhang, Chuanbiao & Li, Wenjuan & Xiao, Qiuping & Jiao, Fengyuan & Xu, Sen & Lan, Yanhua & Fu, Yizheng & Shu, Chi-Min & Cao, Weiguo, 2023. "Reaction mechanism of stearic acid pyrolysis via reactive molecular dynamics simulation and TG-IR technology," Renewable Energy, Elsevier, vol. 217(C).
    15. Peng, Lihua & Chao, Luomeng & Xu, Ziqing & Yang, Haibin & Zheng, Dapeng & Wei, Boxuan & Sun, Changwei & Cui, Hongzhi, 2022. "High-efficiency energy-saving buildings utilizing potassium tungsten bronze heat-insulating glass and polyethylene glycol/expanded energy storage blanket," Energy, Elsevier, vol. 255(C).
    16. Zhang, Xiangguo & Li, Yuqing & Luo, Chunhuan & Pan, Chongchao, 2021. "Fabrication and properties of novel tubular carbon fiber-ionic liquids/stearic acid composite PCMs," Renewable Energy, Elsevier, vol. 177(C), pages 411-421.
    17. Paul, John & Pandey, A.K. & Mishra, Yogeshwar Nath & Said, Zafar & Mishra, Yogendra Kumar & Ma, Zhenjun & Jacob, Jeeja & Kadirgama, K. & Samykano, M. & Tyagi, V.V., 2022. "Nano-enhanced organic form stable PCMs for medium temperature solar thermal energy harvesting: Recent progresses, challenges, and opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    18. Zhou, Yunhong & Zeng, Jiwei & Guo, Yiyou & Chen, Haobin & Bi, Tiantian & Lin, Qilang, 2023. "Three-dimensional hierarchical porous carbon surface-decorated graphitic carbon foam/stearic acid composite as high-performance shape-stabilized phase change material with desirable photothermal conve," Applied Energy, Elsevier, vol. 352(C).
    19. Wu, Shaofei & Yan, Ting & Kuai, Zihan & Pan, Weiguo, 2020. "Preparation and thermal property analysis of a novel phase change heat storage material," Renewable Energy, Elsevier, vol. 150(C), pages 1057-1065.
    20. Liu, Huan & Tian, Xinxin & Ouyang, Mize & Wang, Xiang & Wu, Dezhen & Wang, Xiaodong, 2021. "Microencapsulating n-docosane phase change material into CaCO3/Fe3O4 composites for high-efficient utilization of solar photothermal energy," Renewable Energy, Elsevier, vol. 179(C), pages 47-64.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:341:y:2023:i:c:s0306261923004658. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.