IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v336y2023ics0306261923001526.html
   My bibliography  Save this article

Layer-structured Li1-xNaxNi0.8Co0.15Al0.05O2-δ oxide anode for enhancing ceria electrolyte based solid ceramic fuel cell operating at lower temperatures down to 370 °C

Author

Listed:
  • Huang, Liwen
  • Wang, Jia
  • Lin, Wen-Feng
  • Wu, Yan

Abstract

A ceria electrolyte-based solid ceramic fuel cell (SCFC) with a layer-structured Li1-xNaxNi0.8Co0.15Al0.05O2 (LNNCA) anode has been developed. The fuel cell with LNNCA anode achieved a maximum power density of 884 mW cm−2 at 550 °C, which is about 1.6 times higher than the pristine LNCA anode. Meanwhile, the L0.8N0.2NCA anode presents a good low temperature characteristic, and it could still be operable at 370 °C with the power density of 63 mW cm−2. The anchoring effect of doped Na+ plays a vital role in maintaining the layered structure of LNNCA. It decreases Li+/Ni2+ intermixing, and inhibits Ni growing on the surface of LNNCA, which enhance the catalytic activity and electrical contact of the anode with the ceria electrolyte. Furthermore, Na-doping enriches oxygen vacancies, and promotes the dissociation of adsorbed hydrogen on the surface of LNNCA anode, and thus improves the hydrogen oxidation reaction activity. On the other hand, the in-situ grown NaOH, which has a low-melting temperature, derived from LNNCA anode, can effectively strengthen the bonding between the anode and the electrolyte at the interface, as well as penetrate into electrolyte and provide extra transport channels for proton and other ions, thus decrease the polarization resistance and enable the SCFC to performance even at 370 °C.

Suggested Citation

  • Huang, Liwen & Wang, Jia & Lin, Wen-Feng & Wu, Yan, 2023. "Layer-structured Li1-xNaxNi0.8Co0.15Al0.05O2-δ oxide anode for enhancing ceria electrolyte based solid ceramic fuel cell operating at lower temperatures down to 370 °C," Applied Energy, Elsevier, vol. 336(C).
  • Handle: RePEc:eee:appene:v:336:y:2023:i:c:s0306261923001526
    DOI: 10.1016/j.apenergy.2023.120788
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923001526
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2023.120788?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Ming & van der Kleij, A. & Verkooijen, A.H.M. & Aravind, P.V., 2013. "An experimental study of the interaction between tar and SOFCs with Ni/GDC anodes," Applied Energy, Elsevier, vol. 108(C), pages 149-157.
    2. Shaikh, Shabana P.S. & Muchtar, Andanastuti & Somalu, Mahendra R., 2015. "A review on the selection of anode materials for solid-oxide fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1-8.
    3. Yang, Yang & Li, Tian & Feng, Peizhong & Wang, Xinxin & Wang, Shaorong & Ling, Yihan & Shao, Zongping, 2022. "Highly efficient conversion of oxygen-bearing low concentration coal-bed methane into power via solid oxide fuel cell integrated with an activated catalyst-modified anode microchannel," Applied Energy, Elsevier, vol. 328(C).
    4. Wang, Chao & Liao, Mingzheng & Liang, Bo & Jiang, Zhiqiang & Zhong, Weilin & Chen, Ying & Luo, Xianglong & Shu, Riyang & Tian, Zhipeng & Lei, Libin, 2021. "Enhancement effect of catalyst support on indirect hydrogen production from propane partial oxidation towards commercial solid oxide fuel cell (SOFC) applications," Applied Energy, Elsevier, vol. 288(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ud Din, Zia & Zainal, Z.A., 2017. "The fate of SOFC anodes under biomass producer gas contaminants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 1050-1066.
    2. Sharma, Monikankana & N, Rakesh & Dasappa, S., 2016. "Solid oxide fuel cell operating with biomass derived producer gas: Status and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 450-463.
    3. Pourali, Mostafa & Esfahani, Javad Abolfazli, 2022. "Performance analysis of a micro-scale integrated hydrogen production system by analytical approach, machine learning, and response surface methodology," Energy, Elsevier, vol. 255(C).
    4. Yu, Fangyong & Xiao, Jie & Zhang, Yapeng & Cai, Weizi & Xie, Yongmin & Yang, Naitao & Liu, Jiang & Liu, Meilin, 2019. "New insights into carbon deposition mechanism of nickel/yttrium-stabilized zirconia cermet from methane by in situ investigation," Applied Energy, Elsevier, vol. 256(C).
    5. Ud Din, Zia & Zainal, Z.A., 2016. "Biomass integrated gasification–SOFC systems: Technology overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1356-1376.
    6. Hedayat, Nader & Du, Yanhai & Ilkhani, Hoda, 2017. "Review on fabrication techniques for porous electrodes of solid oxide fuel cells by sacrificial template methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 1221-1239.
    7. Chen, Qianyang & Qiu, Qianyuan & Yan, Xiaomin & Zhou, Mingyang & Zhang, Yapeng & Liu, Zhijun & Cai, Weizi & Wang, Wei & Liu, Jiang, 2020. "A compact and seal-less direct carbon solid oxide fuel cell stack stepping into practical application," Applied Energy, Elsevier, vol. 278(C).
    8. Rakesh N, & Dasappa, S., 2018. "A critical assessment of tar generated during biomass gasification - Formation, evaluation, issues and mitigation strategies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 1045-1064.
    9. Dasheng Lee & Kuan-Chung Lin, 2020. "How to Transform Sustainable Energy Technology into a Unicorn Start-Up: Technology Review and Case Study," Sustainability, MDPI, vol. 12(7), pages 1-26, April.
    10. Choi, Min-Jun & Jeong, Yong-Seong & Kim, Joo-Sik, 2021. "Air gasification of polyethylene terephthalate using a two-stage gasifier with active carbon for the production of H2 and CO," Energy, Elsevier, vol. 223(C).
    11. Hossain, Shahzad & Abdalla, Abdalla M. & Jamain, Siti Noorazean Binti & Zaini, Juliana Hj & Azad, Abul K., 2017. "A review on proton conducting electrolytes for clean energy and intermediate temperature-solid oxide fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 750-764.
    12. Choi, Young-Kon & Mun, Tae-Young & Cho, Min-Hwan & Kim, Joo-Sik, 2016. "Gasification of dried sewage sludge in a newly developed three-stage gasifier: Effect of each reactor temperature on the producer gas composition and impurity removal," Energy, Elsevier, vol. 114(C), pages 121-128.
    13. Evangelia Ioannidou & Stylianos G. Neophytides & Dimitrios K. Niakolas, 2023. "Ternary Fe- or Mo-Au-Ni/GDC as Candidate Fuel Electrodes for the Internal Dry Reforming of CH 4 : Physicochemical and Kinetic Investigation," Energies, MDPI, vol. 17(1), pages 1-23, December.
    14. Komatsu, Y. & Brus, G. & Kimijima, S. & Szmyd, J.S., 2014. "The effect of overpotentials on the transient response of the 300W SOFC cell stack voltage," Applied Energy, Elsevier, vol. 115(C), pages 352-359.
    15. Jeong, Yong-Seong & Kim, Jong-Woo & Seo, Myung-Won & Mun, Tae-Young & Kim, Joo-Sik, 2021. "Characteristics of two-stage air gasification of polystyrene with active carbon as a tar removal agent," Energy, Elsevier, vol. 219(C).
    16. Tan, Weng Cheong & Saw, Lip Huat & Thiam, Hui San & Xuan, Jin & Cai, Zuansi & Yew, Ming Chian, 2018. "Overview of porous media/metal foam application in fuel cells and solar power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 181-197.
    17. Alvaro Fernandes & Joerg Brabandt & Oliver Posdziech & Ali Saadabadi & Mayra Recalde & Liyuan Fan & Eva O. Promes & Ming Liu & Theo Woudstra & Purushothaman Vellayan Aravind, 2018. "Design, Construction, and Testing of a Gasifier-Specific Solid Oxide Fuel Cell System," Energies, MDPI, vol. 11(8), pages 1-17, July.
    18. Fan, Liyuan & Li, Chao'en & van Biert, Lindert & Zhou, Shou-Han & Tabish, Asif Nadeem & Mokhov, Anatoli & Aravind, Purushothaman Vellayani & Cai, Weiwei, 2022. "Advances on methane reforming in solid oxide fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).
    19. Putilov, L.P. & Demin, A.K. & Tsidilkovski, V.I. & Tsiakaras, P., 2019. "Theoretical modeling of the gas humidification effect on the characteristics of proton ceramic fuel cells," Applied Energy, Elsevier, vol. 242(C), pages 1448-1459.
    20. Cavalli, A. & Kunze, M. & Aravind, P.V., 2018. "Cross-influence of toluene as tar model compound and HCl on Solid Oxide Fuel Cell anodes in Integrated Biomass Gasifier SOFC Systems," Applied Energy, Elsevier, vol. 231(C), pages 1-11.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:336:y:2023:i:c:s0306261923001526. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.