IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v307y2022ics0306261921014318.html
   My bibliography  Save this article

Optimized coupling of ammonia decomposition and electrochemical oxidation in a tubular direct ammonia solid oxide fuel cell for high-efficiency power generation

Author

Listed:
  • Luo, Yu
  • Liao, Shuting
  • Chen, Shuai
  • Fang, Huihuang
  • Zhong, Fulan
  • Lin, Li
  • Zhou, Chen
  • Chen, Chongqi
  • Cai, Guohui
  • Au, Chak-Tong
  • Jiang, Lilong

Abstract

With high energy density both by weight and volume, ammonia (NH3) is a promising hydrogen carrier. Furthemore, NH3 has a mature industrial background, and in liquid form storage and transportation is not a problem. Adding the merit of zero CO2 emission, NH3-to-power by direct ammonia solid oxide fuel cells (DA-SOFCs) is an acceptable strategy to facilitate hydrogen usage. Nonetheless, to achieve efficacy, a high compatibility between operating temperature and catalytic materials for NH3 decomposition is needed. In this work, we developed a tubular DA-SOFC with an output power capability of > 3 W. By combining experimental measurements and multi-physics simulation, we comprehensively studies the related intrinsic processes. Based on experimental data, we developed a two-dimensional multi-scale electro-thermo model of tubular DA-SOFC. Separately we evaluated the effects of inlet fuel gas composition, inlet flow velocity, operating temperature, and operating voltage on the rate of NH3 catalytic decomposition and H2 electrochemical oxidation, as well as on NH3 conversion, H atom utilization, and electrical efficiency of the tubular DA-SOFC. The results suggest that high H atom utilization could be realized by matching the rate of NH3 decomposition with that of H2 electrochemical oxidation. It was observed that with the decrease of temperature, the rate of H2 oxidation decreases more rapidly than that of NH3 decomposition, suggesting that the flow velocity of NH3 should be appropriately lowered to optimize H atom utilization. Finally, we established a correlation between H atom utilization, operating voltage, and electrical efficiency for synergistic optimization of operating conditions. At 0.7 V and 800 ℃, the tubular DA-SOFC fueled with NH3 of 27 mL·min−1 is capable of offering 3.2 W, displaying an efficiency of 60%. Compared to that of a tubular H2-SOFC (only 51% efficiency), the efficiency is significantly higher on the basis of equal voltage and fuel utilization ratio. The outcome of the present study demonstrates the potential of tubular DA-SOFC as a device for high-efficiency power generation.

Suggested Citation

  • Luo, Yu & Liao, Shuting & Chen, Shuai & Fang, Huihuang & Zhong, Fulan & Lin, Li & Zhou, Chen & Chen, Chongqi & Cai, Guohui & Au, Chak-Tong & Jiang, Lilong, 2022. "Optimized coupling of ammonia decomposition and electrochemical oxidation in a tubular direct ammonia solid oxide fuel cell for high-efficiency power generation," Applied Energy, Elsevier, vol. 307(C).
    • Handle: RePEc:eee:appene:v:307:y:2022:i:c:s0306261921014318
    DOI: 10.1016/j.apenergy.2021.118158
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261921014318
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2021.118158?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Reuß, M. & Grube, T. & Robinius, M. & Preuster, P. & Wasserscheid, P. & Stolten, D., 2017. "Seasonal storage and alternative carriers: A flexible hydrogen supply chain model," Applied Energy, Elsevier, vol. 200(C), pages 290-302.
    2. Wang, Yuqing & Zeng, Hongyu & Cao, Tianyu & Shi, Yixiang & Cai, Ningsheng & Ye, Xiaofeng & Wang, Shaorong, 2016. "Start-up and operation characteristics of a flame fuel cell unit," Applied Energy, Elsevier, vol. 178(C), pages 415-421.
    3. Luo, Yu & Shi, Yixiang & Li, Wenying & Cai, Ningsheng, 2015. "Dynamic electro-thermal modeling of co-electrolysis of steam and carbon dioxide in a tubular solid oxide electrolysis cell," Energy, Elsevier, vol. 89(C), pages 637-647.
    4. Perna, A. & Minutillo, M. & Jannelli, E. & Cigolotti, V. & Nam, S.W. & Han, J., 2018. "Design and performance assessment of a combined heat, hydrogen and power (CHHP) system based on ammonia-fueled SOFC," Applied Energy, Elsevier, vol. 231(C), pages 1216-1229.
    5. Wang, Yuanhui & Gu, Yuchen & Zhang, Hua & Yang, Jun & Wang, Jianxin & Guan, Wanbing & Chen, Jieyu & Chi, Bo & Jia, Lichao & Muroyama, Hiroki & Matsui, Toshiaki & Eguchi, Koichi & Zhong, Zheng, 2020. "Efficient and durable ammonia power generation by symmetric flat-tube solid oxide fuel cells," Applied Energy, Elsevier, vol. 270(C).
    6. Guk, Erdogan & Ranaweera, Manoj & Venkatesan, Vijay & Kim, Jung-Sik & Jung, WooChul, 2020. "In-situ temperature monitoring directly from cathode surface of an operating solid oxide fuel cell," Applied Energy, Elsevier, vol. 280(C).
    7. Chen, Yanbo & Luo, Yu & Shi, Yixiang & Cai, Ningsheng, 2020. "Theoretical modeling of a pressurized tubular reversible solid oxide cell for methane production by co-electrolysis," Applied Energy, Elsevier, vol. 268(C).
    8. Eypasch, Martin & Schimpe, Michael & Kanwar, Aastha & Hartmann, Tobias & Herzog, Simon & Frank, Torsten & Hamacher, Thomas, 2017. "Model-based techno-economic evaluation of an electricity storage system based on Liquid Organic Hydrogen Carriers," Applied Energy, Elsevier, vol. 185(P1), pages 320-330.
    9. Luo, Yu & Shi, Yixiang & Li, Wenying & Cai, Ningsheng, 2014. "Comprehensive modeling of tubular solid oxide electrolysis cell for co-electrolysis of steam and carbon dioxide," Energy, Elsevier, vol. 70(C), pages 420-434.
    10. Zeng, Hongyu & Wang, Yuqing & Shi, Yixiang & Cai, Ningsheng & Yuan, Dazhong, 2018. "Highly thermal integrated heat pipe-solid oxide fuel cell," Applied Energy, Elsevier, vol. 216(C), pages 613-619.
    11. Elishav, Oren & Lewin, Daniel R. & Shter, Gennady E. & Grader, Gideon S., 2017. "The nitrogen economy: Economic feasibility analysis of nitrogen-based fuels as energy carriers," Applied Energy, Elsevier, vol. 185(P1), pages 183-188.
    12. Eriksson, E.L.V. & Gray, E.MacA., 2017. "Optimization and integration of hybrid renewable energy hydrogen fuel cell energy systems – A critical review," Applied Energy, Elsevier, vol. 202(C), pages 348-364.
    13. Chuancheng Duan & Robert J. Kee & Huayang Zhu & Canan Karakaya & Yachao Chen & Sandrine Ricote & Angelique Jarry & Ethan J. Crumlin & David Hook & Robert Braun & Neal P. Sullivan & Ryan O’Hayre, 2018. "Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells," Nature, Nature, vol. 557(7704), pages 217-222, May.
    14. Aasadnia, Majid & Mehrpooya, Mehdi, 2018. "Large-scale liquid hydrogen production methods and approaches: A review," Applied Energy, Elsevier, vol. 212(C), pages 57-83.
    15. Cha, Junyoung & Jo, Young Suk & Jeong, Hyangsoo & Han, Jonghee & Nam, Suk Woo & Song, Kwang Ho & Yoon, Chang Won, 2018. "Ammonia as an efficient COX-free hydrogen carrier: Fundamentals and feasibility analyses for fuel cell applications," Applied Energy, Elsevier, vol. 224(C), pages 194-204.
    16. Luo, Yu & Wu, Xiao-yu & Shi, Yixiang & Ghoniem, Ahmed F. & Cai, Ningsheng, 2018. "Exergy analysis of an integrated solid oxide electrolysis cell-methanation reactor for renewable energy storage," Applied Energy, Elsevier, vol. 215(C), pages 371-383.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sun, Yi & Hu, Xiongfeng & Gao, Jun & Han, Yu & Sun, Anwei & Zheng, Nan & Shuai, Wei & Xiao, Gang & Guo, Meiting & Ni, Meng & Xu, Haoran, 2022. "Solid oxide electrolysis cell under real fluctuating power supply with a focus on thermal stress analysis," Energy, Elsevier, vol. 261(PA).
    2. Sun, Yi & Qian, Tang & Zhu, Jingdong & Zheng, Nan & Han, Yu & Xiao, Gang & Ni, Meng & Xu, Haoran, 2023. "Dynamic simulation of a reversible solid oxide cell system for efficient H2 production and power generation," Energy, Elsevier, vol. 263(PA).
    3. Xu, Jiang-Hai & Zhang, Ben-Xi & Yan, Han-Zhang & Ding, Quan & Zhu, Kai-Qi & Yang, Yan-Ru & Huang, Tai-Ming & Li, Shi & Wan, Zhong-Min & Wang, Xiao-Dong, 2023. "A comprehensive assessment of the hybrid power generation system of PEMFC and internal combustion engine based on ammonia decomposition," Energy, Elsevier, vol. 285(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rezaei, Mostafa & Akimov, Alexandr & Gray, Evan MacA., 2024. "Techno-economics of renewable hydrogen export: A case study for Australia-Japan," Applied Energy, Elsevier, vol. 374(C).
    2. Nielsen, Anders S. & Peppley, Brant A. & Burheim, Odne S., 2023. "Controlling the contribution of transport mechanisms in solid oxide co-electrolysis cells to improve product selectivity and performance: A theoretical framework," Applied Energy, Elsevier, vol. 344(C).
    3. Brigljević, Boris & Byun, Manhee & Lim, Hankwon, 2020. "Design, economic evaluation, and market uncertainty analysis of LOHC-based, CO2 free, hydrogen delivery systems," Applied Energy, Elsevier, vol. 274(C).
    4. Grüger, Fabian & Dylewski, Lucy & Robinius, Martin & Stolten, Detlef, 2018. "Carsharing with fuel cell vehicles: Sizing hydrogen refueling stations based on refueling behavior," Applied Energy, Elsevier, vol. 228(C), pages 1540-1549.
    5. Lee, Boreum & Park, Junhyung & Lee, Hyunjun & Byun, Manhee & Yoon, Chang Won & Lim, Hankwon, 2019. "Assessment of the economic potential: COx-free hydrogen production from renewables via ammonia decomposition for small-sized H2 refueling stations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.
    6. Al-Hamed, Khaled H.M. & Dincer, Ibrahim, 2021. "A novel ammonia solid oxide fuel cell-based powering system with on-board hydrogen production for clean locomotives," Energy, Elsevier, vol. 220(C).
    7. Frank, Matthias & Deja, Robert & Peters, Roland & Blum, Ludger & Stolten, Detlef, 2018. "Bypassing renewable variability with a reversible solid oxide cell plant," Applied Energy, Elsevier, vol. 217(C), pages 101-112.
    8. Chen, Yanbo & Luo, Yu & Shi, Yixiang & Cai, Ningsheng, 2020. "Theoretical modeling of a pressurized tubular reversible solid oxide cell for methane production by co-electrolysis," Applied Energy, Elsevier, vol. 268(C).
    9. Xiao, Gang & Sun, Anwei & Liu, Hongwei & Ni, Meng & Xu, Haoran, 2023. "Thermal management of reversible solid oxide cells in the dynamic mode switching," Applied Energy, Elsevier, vol. 331(C).
    10. Olfa Tlili & Christine Mansilla & Jochen Linβen & Markus Reuss & Thomas Grube & Martin Robinius & Jean André & Yannick Perez & Alain Le Duigou & Detlef Stolten, 2020. "Geospatial modelling of the hydrogen infrastructure in France in order to identify the most suited supply chains," Post-Print hal-02421359, HAL.
    11. Simon Kaiser & Felix Siems & Clemens Mostert & Stefan Bringezu, 2022. "Environmental and Economic Performance of CO 2 -Based Methanol Production Using Long-Distance Transport for H 2 in Combination with CO 2 Point Sources: A Case Study for Germany," Energies, MDPI, vol. 15(7), pages 1-22, March.
    12. Sleiti, Ahmad K. & Al-Ammari, Wahib A. & Musharavati, Farayi, 2024. "Novel integrated system for power, hydrogen, and ammonia production using direct oxy-combustion sCO2 power cycle with automatic CO2 capture, water electrolyzer, and Haber-Bosch process," Energy, Elsevier, vol. 307(C).
    13. Reuß, Markus & Grube, Thomas & Robinius, Martin & Stolten, Detlef, 2019. "A hydrogen supply chain with spatial resolution: Comparative analysis of infrastructure technologies in Germany," Applied Energy, Elsevier, vol. 247(C), pages 438-453.
    14. Markus Reuß & Paris Dimos & Aline Léon & Thomas Grube & Martin Robinius & Detlef Stolten, 2021. "Hydrogen Road Transport Analysis in the Energy System: A Case Study for Germany through 2050," Energies, MDPI, vol. 14(11), pages 1-17, May.
    15. Runge, Philipp & Sölch, Christian & Albert, Jakob & Wasserscheid, Peter & Zöttl, Gregor & Grimm, Veronika, 2019. "Economic comparison of different electric fuels for energy scenarios in 2035," Applied Energy, Elsevier, vol. 233, pages 1078-1093.
    16. Huang, Danji & Xiong, Binyu & Fang, Jiakun & Hu, Kewei & Zhong, Zhiyao & Ying, Yuheng & Ai, Xiaomeng & Chen, Zhe, 2022. "A multiphysics model of the compactly-assembled industrial alkaline water electrolysis cell," Applied Energy, Elsevier, vol. 314(C).
    17. Yang, Chao & Jing, Xiuhui & Miao, He & Wu, Yu & Shu, Chen & Wang, Jiatang & Zhang, Houcheng & Yu, Guojun & Yuan, Jinliang, 2020. "Analysis of effects of meso-scale reactions on multiphysics transport processes in rSOFC fueled with syngas," Energy, Elsevier, vol. 190(C).
    18. Luo, Yu & Wu, Xiao-yu & Shi, Yixiang & Ghoniem, Ahmed F. & Cai, Ningsheng, 2018. "Exergy analysis of an integrated solid oxide electrolysis cell-methanation reactor for renewable energy storage," Applied Energy, Elsevier, vol. 215(C), pages 371-383.
    19. Godinho, João & Hoefnagels, Ric & Braz, Catarina G. & Sousa, Ana M. & Granjo, José F.O., 2023. "An economic and greenhouse gas footprint assessment of international maritime transportation of hydrogen using liquid organic hydrogen carriers," Energy, Elsevier, vol. 278(PA).
    20. Joakim Andersson, 2021. "Application of Liquid Hydrogen Carriers in Hydrogen Steelmaking," Energies, MDPI, vol. 14(5), pages 1-26, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:307:y:2022:i:c:s0306261921014318. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.