IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v181y2016icp477-494.html
   My bibliography  Save this article

A model for the performance assessment of hybrid coolers by means of transient numerical simulation

Author

Listed:
  • D’Antoni, M.
  • Romeli, D.
  • Fedrizzi, R.

Abstract

This paper presents the development of a numerical model of a hybrid cooler for transient simulation purposes as a component of a thermal energy system. The model uses a modular definition of the control volume, and is suitable for modelling any staggered coil geometry. The set of parameters required for modelling the hybrid cooler is typical of the so-called design models. A rigorous analysis of sensible and latent heat fluxes due to spray water evaporation is included. Further, the model can be exploited for the development of user-defined control strategies of fans and water spray systems. The model is validated using monitored data from a pilot system installation in which a commercial hybrid cooler is operated under typical summer south European working conditions.

Suggested Citation

  • D’Antoni, M. & Romeli, D. & Fedrizzi, R., 2016. "A model for the performance assessment of hybrid coolers by means of transient numerical simulation," Applied Energy, Elsevier, vol. 181(C), pages 477-494.
    • Handle: RePEc:eee:appene:v:181:y:2016:i:c:p:477-494
    DOI: 10.1016/j.apenergy.2016.08.110
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261916312089
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2016.08.110?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Stabat, Pascal & Marchio, Dominique, 2004. "Simplified model for indirect-contact evaporative cooling-tower behaviour," Applied Energy, Elsevier, vol. 78(4), pages 433-451, August.
    2. Cheng, Wen-Long & Han, Feng-Yun & Liu, Qi-Nie & Fan, Han-Lin, 2011. "Spray characteristics and spray cooling heat transfer in the non-boiling regime," Energy, Elsevier, vol. 36(5), pages 3399-3405.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tianshi Zhang & Ziming Mo & Xiaoyu Xu & Xiaoyan Liu & Haopeng Chen & Zhiwu Han & Yuying Yan & Yingai Jin, 2022. "Advanced Study of Spray Cooling: From Theories to Applications," Energies, MDPI, vol. 15(23), pages 1-40, December.
    2. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Modeling and Optimization of a CoolingTower-Assisted Heat Pump System," Energies, MDPI, vol. 10(5), pages 1-18, May.
    3. Peikun Zhang & Bingfa Guo & Li Wang, 2023. "An Experimental Study on the Heat and Mass Transfer Characteristics of an Evaporative Cooler," Energies, MDPI, vol. 16(21), pages 1-15, October.
    4. Lu, Yuanshen & Klimenko, Alexander & Russell, Hugh & Dai, Yuchen & Warner, John & Hooman, Kamel, 2018. "A conceptual study on air jet-induced swirling plume for performance improvement of natural draft cooling towers," Applied Energy, Elsevier, vol. 217(C), pages 496-508.
    5. Cheng, Wen-Long & Zhang, Wei-Wei & Chen, Hua & Hu, Lei, 2016. "Spray cooling and flash evaporation cooling: The current development and application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 614-628.
    6. Gibelhaus, Andrej & Tangkrachang, Thanaphum & Bau, Uwe & Seiler, Jan & Bardow, André, 2019. "Integrated design and control of full sorption chiller systems," Energy, Elsevier, vol. 185(C), pages 409-422.
    7. Afroz, Zakia & Shafiullah, GM & Urmee, Tania & Higgins, Gary, 2018. "Modeling techniques used in building HVAC control systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 83(C), pages 64-84.
    8. Cui, Haijiao & Li, Nianping & Peng, Jinqing & Cheng, Jianlin & Li, Shengbing, 2016. "Study on the dynamic and thermal performances of a reversibly used cooling tower with upward spraying," Energy, Elsevier, vol. 96(C), pages 268-277.
    9. GaneshKumar, Poongavanam & Sivalingam, VinothKumar & Vigneswaran, V.S. & Ramalingam, Velraj & Seong Cheol, Kim & Vanaraj, Ramkumar, 2024. "Spray cooling for hydrogen vehicle, electronic devices, solar and building (low temperature) applications: A state-of-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PA).
    10. Ma, Peizheng & Wang, Lin-Shu & Guo, Nianhua, 2014. "Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower," Applied Energy, Elsevier, vol. 127(C), pages 172-181.
    11. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method," Energies, MDPI, vol. 10(3), pages 1-15, February.
    12. Xu, Haojie & Wang, Junfeng & Li, Bin & Yu, Kai & Wang, Hai & Tian, Jiameng & Li, Bufa, 2022. "Electrospray characteristics and cooling performance of dielectric fluid HFE-7100," Energy, Elsevier, vol. 259(C).
    13. Tarun Kumar Aseri & Chandan Sharma & Tara C. Kandpal, 2022. "Condenser cooling technologies for concentrating solar power plants: a review," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(4), pages 4511-4565, April.
    14. Shan, Nannan & Yin, Yonggao & Zhang, Xiaosong, 2018. "Study on performance of a novel energy-efficient heat pump system using liquid desiccant," Applied Energy, Elsevier, vol. 219(C), pages 325-337.
    15. Chen, Hua & Cheng, Wen-long & Zhang, Wei-wei & Peng, Yu-hang & Jiang, Li-jia, 2017. "Energy saving evaluation of a novel energy system based on spray cooling for supercomputer center," Energy, Elsevier, vol. 141(C), pages 304-315.
    16. Björn Nienborg & Marc Mathieu & Alexander Schwärzler & Katharina Conzelmann & Lena Schnabel, 2021. "Model-Based Evaluation of Air-Side Fouling in Closed-Circuit Cooling Towers," Energies, MDPI, vol. 14(3), pages 1-15, January.
    17. Wu, Zhiyong & Lu, Zhibin & Zhang, Bingjian & He, Chang & Chen, Qinglin & Yu, Haoshui & Ren, Jingzheng, 2022. "Stochastic bi-objective optimization for closed wet cooling tower systems based on a simplified analytical model," Energy, Elsevier, vol. 250(C).
    18. Chang, Chun-Cheng & Shieh, Shyan-Shu & Jang, Shi-Shang & Wu, Chan-Wei & Tsou, Ying, 2015. "Energy conservation improvement and ON–OFF switch times reduction for an existing VFD-fan-based cooling tower," Applied Energy, Elsevier, vol. 154(C), pages 491-499.
    19. Luo, Zhenbing & He, Wei & Deng, Xiong & Zheng, Mu & Gao, Tianxiang & Li, Shiqing, 2023. "A compacted non-pump self-circulation spray cooling system based on dual synthetic jet referring to the principle of two-phase loop thermosyphon," Energy, Elsevier, vol. 263(PB).
    20. Jihang Xu & Weitao Bai & Jian Wang & Zhihui Mu & Weizhen Sun & Boda Dong & Kai Song & Yalan Yang & Shirong Guo & Sheng Shu & Yu Wang, 2023. "Study on the Cooling Effect of Double-Layer Spray Greenhouse," Agriculture, MDPI, vol. 13(7), pages 1-16, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:181:y:2016:i:c:p:477-494. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.