IDEAS home Printed from https://ideas.repec.org/a/wly/greenh/v7y2017i4p721-730.html
   My bibliography  Save this article

Direct decomposition of CO 2 using self‐cooling dielectric barrier discharge plasma

Author

Listed:
  • Amin Zhou
  • Dong Chen
  • Bin Dai
  • Cunhua Ma
  • Panpan Li
  • Feng Yu

Abstract

As a greenhouse gas, carbon dioxide (CO 2 ) is one of the major causes of global warming. The effective control of CO 2 emission has become a major global concern. To reduce CO 2 emission in the environment and to maximize the use of CO 2 , a self‐cooling wire‐cylinder dielectric barrier discharge (DBD) plasma reactor was used to decompose CO 2 at ambient conditions, and the results were compared with a common wire‐cylinder DBD reactor. Results indicated that in the said plasma reactor, circulating water could obviously improve discharge efficiency through taking away heat that was generated during plasma discharge process, and a more stable and homogeneous discharge was easier to obtain. The CO 2 decomposition rate was 26.1% without using any catalysts and discharge mediums or modifying electrodes, and this value was significantly higher than that in the common wire‐cylinder DBD reactor (10.1% CO 2 decomposition rate). Moreover, the CO 2 decomposition rate could reach up to 35.8% when N 2 was added (volume ratio V N 2 : V C O 2 = 9 : 1 ). © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd.

Suggested Citation

  • Amin Zhou & Dong Chen & Bin Dai & Cunhua Ma & Panpan Li & Feng Yu, 2017. "Direct decomposition of CO 2 using self‐cooling dielectric barrier discharge plasma," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 7(4), pages 721-730, August.
  • Handle: RePEc:wly:greenh:v:7:y:2017:i:4:p:721-730
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1002/ghg.1683
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Indarto, Antonius & Choi, Jae-Wook & Lee, Hwaung & Song, Hyung Keun, 2006. "Effect of additive gases on methane conversion using gliding arc discharge," Energy, Elsevier, vol. 31(14), pages 2986-2995.
    2. Xiaofei Duan & Yanping Li & Wenjie Ge & Baowei Wang, 2015. "Degradation of CO 2 through dielectric barrier discharge microplasma," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 5(2), pages 131-140, April.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chung, Wei-Chieh & Chang, Moo-Been, 2016. "Review of catalysis and plasma performance on dry reforming of CH4 and possible synergistic effects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 13-31.
    2. Rafiq, M.H. & Hustad, J.E., 2011. "Experimental and thermodynamic studies of the catalytic partial oxidation of model biogas using a plasma-assisted gliding arc reactor," Renewable Energy, Elsevier, vol. 36(11), pages 2878-2887.
    3. Rahmati, Hamed & Ghorbanzadeh, Atamalek, 2021. "Parallel electrodes gliding plasma: Working principles and application in dry reforming of methane," Energy, Elsevier, vol. 230(C).
    4. Gao, Yuan & Zhang, Shuai & Sun, Hao & Wang, Ruixue & Tu, Xin & Shao, Tao, 2018. "Highly efficient conversion of methane using microsecond and nanosecond pulsed spark discharges," Applied Energy, Elsevier, vol. 226(C), pages 534-545.
    5. Khalifeh, Omid & Mosallanejad, Amin & Taghvaei, Hamed & Rahimpour, Mohammad Reza & Shariati, Alireza, 2016. "Decomposition of methane to hydrogen using nanosecond pulsed plasma reactor with different active volumes, voltages and frequencies," Applied Energy, Elsevier, vol. 169(C), pages 585-596.
    6. Vadikkeettil, Yugesh & Subramaniam, Yugeswaran & Murugan, Ramaswamy & Ananthapadmanabhan, P.V. & Mostaghimi, Javad & Pershin, Larry & Batiot-Dupeyrat, Catherine & Kobayashi, Yasukazu, 2022. "Plasma assisted decomposition and reforming of greenhouse gases: A review of current status and emerging trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    7. Liu, Heng & Yang, Shuang & Wu, Shujie & Shang, Fanpeng & Yu, Xiaofang & Xu, Chen & Guan, Jingqi & Kan, Qiubin, 2011. "Synthesis of Mo/TNU-9 (TNU-9 Taejon National University No. 9) catalyst and its catalytic performance in methane non-oxidative aromatization," Energy, Elsevier, vol. 36(3), pages 1582-1589.
    8. Guofeng, Xu & Xinwei, Ding, 2012. "Optimization geometries of a vortex gliding-arc reactor for partial oxidation of methane," Energy, Elsevier, vol. 47(1), pages 333-339.
    9. Usman, Muhammad & Wan Daud, W.M.A. & Abbas, Hazzim F., 2015. "Dry reforming of methane: Influence of process parameters—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 710-744.
    10. Aleknaviciute, I. & Karayiannis, T.G. & Collins, M.W. & Xanthos, C., 2013. "Methane decomposition under a corona discharge to generate COx-free hydrogen," Energy, Elsevier, vol. 59(C), pages 432-439.
    11. Mateusz Wnukowski, 2023. "Methane Pyrolysis with the Use of Plasma: Review of Plasma Reactors and Process Products," Energies, MDPI, vol. 16(18), pages 1-34, September.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:greenh:v:7:y:2017:i:4:p:721-730. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)2152-3878 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.