IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v36y2011i11p2878-2887.html
   My bibliography  Save this article

Experimental and thermodynamic studies of the catalytic partial oxidation of model biogas using a plasma-assisted gliding arc reactor

Author

Listed:
  • Rafiq, M.H.
  • Hustad, J.E.

Abstract

The present work is an investigation of the influence of process conditions on the production of synthesis gas (H2 and CO) from model biogas (molar ratio of CH4/CO2 = 60/40) through partial oxidation over a granular Ni-based catalyst. The investigations were performed in a partially adiabatic plasma-assisted (non-thermal) Gliding Arc (GlidArc) reactor in a transitional flow regime at a fixed pressure (1 bar) and electric power (0.3 kW). The emphasis of this investigation was on an experimental study and a comparative thermodynamic analysis. The equilibrium compositions were calculated using a Lagrange multiplier and resulted in the development of systems of non-linear algebraic equations, which were solved numerically using the MATLAB® function “fmincon”. Two cases were studied: normal air (molar ratio of O2/N2 = 21/79) and enriched air (O2/N2 = 40/60). The individual effects of the O2/CH4 molar ratio and the bed exit temperature (Texit) were studied in both cases. The main trends of the CH4 conversion, the synthesis gas yield, the H2/CO ratio and the thermal efficiency of the reactor were analyzed, and it was shown that any deviations from equilibrium could be explained by temperature gradients and irregular gas flows. The results of this study revealed that CO2 could be used as a neutral gas in this process. When normal air was used, an O2/CH4 molar ratio of 0.66, a gas hour space velocity (GHSV) of 1.26 NL/gcat/h, a maximal temperature (Tmax) of 870 °C and an exit temperature (Texit) of 630 °C were found to be optimal parameters, and when enriched air was used, these ideal parameters were an O2/CH4 molar ratio of 0.64, a GHSV of 0.86 NL/gcat/h, a Tmax of 860 °C and a Texit of 635 °C.

Suggested Citation

  • Rafiq, M.H. & Hustad, J.E., 2011. "Experimental and thermodynamic studies of the catalytic partial oxidation of model biogas using a plasma-assisted gliding arc reactor," Renewable Energy, Elsevier, vol. 36(11), pages 2878-2887.
  • Handle: RePEc:eee:renene:v:36:y:2011:i:11:p:2878-2887
    DOI: 10.1016/j.renene.2011.04.012
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148111001844
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2011.04.012?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Indarto, Antonius & Choi, Jae-Wook & Lee, Hwaung & Song, Hyung Keun, 2006. "Effect of additive gases on methane conversion using gliding arc discharge," Energy, Elsevier, vol. 31(14), pages 2986-2995.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mei, Danhua & Liu, Shiyun & Wang, Sen & Zhou, Renwu & Zhou, Rusen & Fang, Zhi & Zhang, Xianhui & Cullen, Patrick J. & Ostrikov, Kostya (Ken), 2020. "Plasma-enabled liquefaction of lignocellulosic biomass: Balancing feedstock content for maximum energy yield," Renewable Energy, Elsevier, vol. 157(C), pages 1061-1071.
    2. Sajjad, H. & Masjuki, H.H. & Varman, M. & Kalam, M.A. & Arbab, M.I. & Imtenan, S. & Rahman, S.M. Ashrafur, 2014. "Engine combustion, performance and emission characteristics of gas to liquid (GTL) fuels and its blends with diesel and bio-diesel," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 961-986.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chung, Wei-Chieh & Chang, Moo-Been, 2016. "Review of catalysis and plasma performance on dry reforming of CH4 and possible synergistic effects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 13-31.
    2. Rahmati, Hamed & Ghorbanzadeh, Atamalek, 2021. "Parallel electrodes gliding plasma: Working principles and application in dry reforming of methane," Energy, Elsevier, vol. 230(C).
    3. Gao, Yuan & Zhang, Shuai & Sun, Hao & Wang, Ruixue & Tu, Xin & Shao, Tao, 2018. "Highly efficient conversion of methane using microsecond and nanosecond pulsed spark discharges," Applied Energy, Elsevier, vol. 226(C), pages 534-545.
    4. Khalifeh, Omid & Mosallanejad, Amin & Taghvaei, Hamed & Rahimpour, Mohammad Reza & Shariati, Alireza, 2016. "Decomposition of methane to hydrogen using nanosecond pulsed plasma reactor with different active volumes, voltages and frequencies," Applied Energy, Elsevier, vol. 169(C), pages 585-596.
    5. Vadikkeettil, Yugesh & Subramaniam, Yugeswaran & Murugan, Ramaswamy & Ananthapadmanabhan, P.V. & Mostaghimi, Javad & Pershin, Larry & Batiot-Dupeyrat, Catherine & Kobayashi, Yasukazu, 2022. "Plasma assisted decomposition and reforming of greenhouse gases: A review of current status and emerging trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    6. Liu, Heng & Yang, Shuang & Wu, Shujie & Shang, Fanpeng & Yu, Xiaofang & Xu, Chen & Guan, Jingqi & Kan, Qiubin, 2011. "Synthesis of Mo/TNU-9 (TNU-9 Taejon National University No. 9) catalyst and its catalytic performance in methane non-oxidative aromatization," Energy, Elsevier, vol. 36(3), pages 1582-1589.
    7. Amin Zhou & Dong Chen & Bin Dai & Cunhua Ma & Panpan Li & Feng Yu, 2017. "Direct decomposition of CO 2 using self‐cooling dielectric barrier discharge plasma," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 7(4), pages 721-730, August.
    8. Guofeng, Xu & Xinwei, Ding, 2012. "Optimization geometries of a vortex gliding-arc reactor for partial oxidation of methane," Energy, Elsevier, vol. 47(1), pages 333-339.
    9. Usman, Muhammad & Wan Daud, W.M.A. & Abbas, Hazzim F., 2015. "Dry reforming of methane: Influence of process parameters—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 710-744.
    10. Aleknaviciute, I. & Karayiannis, T.G. & Collins, M.W. & Xanthos, C., 2013. "Methane decomposition under a corona discharge to generate COx-free hydrogen," Energy, Elsevier, vol. 59(C), pages 432-439.
    11. Mateusz Wnukowski, 2023. "Methane Pyrolysis with the Use of Plasma: Review of Plasma Reactors and Process Products," Energies, MDPI, vol. 16(18), pages 1-34, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:36:y:2011:i:11:p:2878-2887. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.