IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v16y2024i2p937-d1324129.html
   My bibliography  Save this article

A Comprehensive Study of Biochar Yield and Quality Concerning Pyrolysis Conditions: A Multifaceted Approach

Author

Listed:
  • Alperay Altıkat

    (Biosystems Engineering Department, Iğdır University, Iğdır 76000, Türkiye)

  • Mehmet Hakkı Alma

    (Biosystems Engineering Department, Iğdır University, Iğdır 76000, Türkiye)

  • Aysun Altıkat

    (Environmental Engineering Department, Iğdır University, Iğdır 76000, Türkiye)

  • Mehmet Emin Bilgili

    (Eastern Mediterranean Agricultural Research Institute, Karataş Road 17 km, P.O. Box 45, Adana 01321, Türkiye)

  • Sefa Altıkat

    (Biosystems Engineering Department, Iğdır University, Iğdır 76000, Türkiye)

Abstract

In this research, we investigated the yields of biochar, bio-oil, and synthesis gas under various pyrolysis conditions, as well as their impact on the elemental composition, FTIR, EDX, SEM, and HCV values of biochar. This study utilized three different pyrolysis temperatures (400 °C, 500 °C, 600 °C), two holding times (30 and 60 min), and two N 2 gas flow rates (0.2 and 0.5 L min −1 ). We observed that an increase in pyrolysis temperature led to a decrease in the yields of biochar and bio-oil, while synthesis gas yield increased, as expected. Additionally, a higher gas flow rate resulted in a reduction of biochar yield from 34.07% to 32.72%. A longer residence time diminished the bio-oil yield but increased the synthesis gas yield. The FTIR, EDX, and elemental analysis of biochar produced at a pyrolysis temperature of 600 °C, with a 60-min holding time and a 0.2 L min −1 N 2 gas flow rate, indicated maximized carbon content. Moreover, a more porous structure was observed at higher pyrolysis temperatures. The research also revealed that increases in pyrolysis temperature, residence time, and gas flow rate enhanced the energy content of the biochar.

Suggested Citation

  • Alperay Altıkat & Mehmet Hakkı Alma & Aysun Altıkat & Mehmet Emin Bilgili & Sefa Altıkat, 2024. "A Comprehensive Study of Biochar Yield and Quality Concerning Pyrolysis Conditions: A Multifaceted Approach," Sustainability, MDPI, vol. 16(2), pages 1-22, January.
  • Handle: RePEc:gam:jsusta:v:16:y:2024:i:2:p:937-:d:1324129
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/16/2/937/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/16/2/937/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Nallagatla Vinod Kumar & Gajanan L. Sawargaonkar & C. Sudha Rani & Ajay Singh & T. Ram Prakash & S. Triveni & Prasad J. Kamdi & Rajesh Pasumarthi & Rayapati Karthik & Bathula Venkatesh, 2023. "Comparative Analysis of Pigeonpea Stalk Biochar Characteristics and Energy Use under Different Biochar Production Methods," Sustainability, MDPI, vol. 15(19), pages 1-17, September.
    2. Aysu, Tevfik & Küçük, M. Maşuk, 2014. "Biomass pyrolysis in a fixed-bed reactor: Effects of pyrolysis parameters on product yields and characterization of products," Energy, Elsevier, vol. 64(C), pages 1002-1025.
    3. Muhammet Enes Önür & Kamil Ekinci & Mihriban Civan & Mehmet Emin Bilgili & Sema Yurdakul, 2023. "Quality Properties and Torrefaction Characteristics of Pellets: Rose Oil Distillation Solid Waste and Red Pine Sawdust," Sustainability, MDPI, vol. 15(14), pages 1-16, July.
    4. Omar Morsy & Farzad Hourfar & Qinqin Zhu & Ali Almansoori & Ali Elkamel, 2023. "A Superstructure Mixed-Integer Nonlinear Programming Optimization for the Optimal Processing Pathway Selection of Sludge-to-Energy Technologies," Sustainability, MDPI, vol. 15(5), pages 1-34, February.
    5. Pranshu Shrivastava & Anil Kumar & Perapong Tekasakul & Su Shiung Lam & Arkom Palamanit, 2021. "Comparative Investigation of Yield and Quality of Bio-Oil and Biochar from Pyrolysis of Woody and Non-Woody Biomasses," Energies, MDPI, vol. 14(4), pages 1-23, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lizhen Qin & Donghoon Shin, 2023. "Effects of UV Light Treatment on Functional Group and Its Adsorption Capacity of Biochar," Energies, MDPI, vol. 16(14), pages 1-14, July.
    2. Hu, Mian & Laghari, Mahmood & Cui, Baihui & Xiao, Bo & Zhang, Beiping & Guo, Dabin, 2018. "Catalytic cracking of biomass tar over char supported nickel catalyst," Energy, Elsevier, vol. 145(C), pages 228-237.
    3. Feng, Qunjie & Lin, Yunqin, 2017. "Integrated processes of anaerobic digestion and pyrolysis for higher bioenergy recovery from lignocellulosic biomass: A brief review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 1272-1287.
    4. Lee, Hyung Won & Jun, Bo Ram & Kim, Hannah & Kim, Do Heui & Jeon, Jong-Ki & Park, Sung Hoon & Ko, Chang Hyun & Kim, Tae-Wan & Park, Young-Kwon, 2015. "Catalytic hydrodeoxygenation of 2-methoxy phenol and dibenzofuran over Pt/mesoporous zeolites," Energy, Elsevier, vol. 81(C), pages 33-40.
    5. Prasertcharoensuk, Phuet & Bull, Steve J. & Phan, Anh N., 2019. "Gasification of waste biomass for hydrogen production: Effects of pyrolysis parameters," Renewable Energy, Elsevier, vol. 143(C), pages 112-120.
    6. Anupam, Kumar & Sharma, Arvind Kumar & Lal, Priti Shivhare & Dutta, Suman & Maity, Sudip, 2016. "Preparation, characterization and optimization for upgrading Leucaena leucocephala bark to biochar fuel with high energy yielding," Energy, Elsevier, vol. 106(C), pages 743-756.
    7. Gabriel Talero & Yasuki Kansha, 2022. "Simulation of the Steam Gasification of Japanese Waste Wood in an Indirectly Heated Downdraft Reactor Using PRO/II™: Numerical Comparison of Stoichiometric and Kinetic Models," Energies, MDPI, vol. 15(12), pages 1-19, June.
    8. Jin, Sung Ho & Lee, Hyung Won & Ryu, Changkook & Jeon, Jong-Ki & Park, Young-Kwon, 2015. "Catalytic fast pyrolysis of Geodae-Uksae 1 over zeolites," Energy, Elsevier, vol. 81(C), pages 41-46.
    9. Junaid Ahmad & Stergios Vakalis & Francesco Patuzzi & Marco Baratieri, 2021. "Effect of process conditions on the surface properties of biomass chars produced by means of pyrolysis and CO2 gasification," Energy & Environment, , vol. 32(8), pages 1378-1396, December.
    10. Zeng, Kuo & Gauthier, Daniel & Li, Rui & Flamant, Gilles, 2015. "Solar pyrolysis of beech wood: Effects of pyrolysis parameters on the product distribution and gas product composition," Energy, Elsevier, vol. 93(P2), pages 1648-1657.
    11. Anand, Abhijeet & Kumar, Vivek & Kaushal, Priyanka, 2022. "Biochar and its twin benefits: Crop residue management and climate change mitigation in India," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    12. Yang, S.I. & Wu, M.S. & Hsu, T.C., 2017. "Experimental and numerical simulation study of oxycombustion of fast pyrolysis bio-oil from lignocellulosic biomass," Energy, Elsevier, vol. 126(C), pages 854-867.
    13. Ranju Kumari Rathour & Mamta Devi & Pushpak Dahiya & Nitish Sharma & Neelam Kaushik & Dolly Kumari & Pradeep Kumar & Rama Raju Baadhe & Abhishek Walia & Arvind Kumar Bhatt & Ravi Kant Bhatia, 2023. "Recent Trends, Opportunities and Challenges in Sustainable Management of Rice Straw Waste Biomass for Green Biorefinery," Energies, MDPI, vol. 16(3), pages 1-18, February.
    14. Liaqat Ali & Arkom Palamanit & Kuaanan Techato & Asad Ullah & Md. Shahariar Chowdhury & Khamphe Phoungthong, 2022. "Characteristics of Biochars Derived from the Pyrolysis and Co-Pyrolysis of Rubberwood Sawdust and Sewage Sludge for Further Applications," Sustainability, MDPI, vol. 14(7), pages 1-21, March.
    15. Opatokun, Suraj Adebayo & Strezov, Vladimir & Kan, Tao, 2015. "Product based evaluation of pyrolysis of food waste and its digestate," Energy, Elsevier, vol. 92(P3), pages 349-354.
    16. Gao, Xiaoyan & Zhang, Yaning & Xu, Fei & Yin, Zhaoqin & Wang, Yingying & Bao, Fubing & Li, Bingxi, 2019. "Experimental and kinetic studies on the intrinsic reactivities of rice husk char," Renewable Energy, Elsevier, vol. 135(C), pages 608-616.
    17. Nafees Ur Rehman & Jan Nisar & Ghulam Ali & Ali Ahmad & Afzal Shah & Zahoor H. Farooqi & Faisal Muhammad, 2023. "Production of Bio-Oil from Thermo-Catalytic Decomposition of Pomegranate Peels over a Sulfonated Tea Waste Heterogeneous Catalyst: A Kinetic Investigation," Energies, MDPI, vol. 16(4), pages 1-17, February.
    18. Samar Elkhalifa & Hamish R. Mackey & Tareq Al-Ansari & Gordon McKay, 2022. "Pyrolysis of Biosolids to Produce Biochars: A Review," Sustainability, MDPI, vol. 14(15), pages 1-19, August.
    19. Ansari, Khursheed B. & Kamal, Bushra & Beg, Sidra & Wakeel Khan, Md. Aquib & Khan, Mohd Shariq & Al Mesfer, Mohammed K. & Danish, Mohd., 2021. "Recent developments in investigating reaction chemistry and transport effects in biomass fast pyrolysis: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    20. Qambrani, Naveed Ahmed & Rahman, Md. Mukhlesur & Won, Seunggun & Shim, Soomin & Ra, Changsix, 2017. "Biochar properties and eco-friendly applications for climate change mitigation, waste management, and wastewater treatment: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 255-273.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:16:y:2024:i:2:p:937-:d:1324129. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.