IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i5p2997-d763942.html
   My bibliography  Save this article

Effects of Ag Current Collecting Layer Fabricated by Sputter for 3D-Printed Polymer Bipolar Plate of Ultra-Light Polymer Electrolyte Membrane Fuel Cells

Author

Listed:
  • Gye-Eun Jang

    (Department of Mechanical Engineering, Dankook University, Yongin-si 16890, Korea)

  • Gu-Young Cho

    (Department of Mechanical Engineering, Dankook University, Yongin-si 16890, Korea)

Abstract

In this study, 3D-printed polymer bipolar plates were fabricated and applied to the polymer electrolyte membrane fuel cells (PEMFCs). In order to overcome the poor electronic conductivity of polymer bipolar plates, silver current collecting layers were deposited using a sputter process. Influences of the thickness of the current collecting layer were carefully investigated to optimize the thickness. Using a sputter process, current collecting layers were successfully deposited without clear evidence of defects. Additionally, the increment in the total weight of bipolar plates was minimized. The average thickness of the silver current collecting layer was varied from 216 nm to 1.46 um. The results showed the fuel cell with 1.46 um thick Ag current collecting layer coated 3D printed bipolar plates achieved 0.96 V of the open circuit voltage and 308.35 mW/cm 2 of performance at 25 °C.

Suggested Citation

  • Gye-Eun Jang & Gu-Young Cho, 2022. "Effects of Ag Current Collecting Layer Fabricated by Sputter for 3D-Printed Polymer Bipolar Plate of Ultra-Light Polymer Electrolyte Membrane Fuel Cells," Sustainability, MDPI, vol. 14(5), pages 1-9, March.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:5:p:2997-:d:763942
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/5/2997/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/5/2997/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Atyabi, Seyed Ali & Afshari, Ebrahim & Zohravi, Elnaz & Udemu, Chinonyelum M., 2021. "Three-dimensional simulation of different flow fields of proton exchange membrane fuel cell using a multi-phase coupled model with cooling channel," Energy, Elsevier, vol. 234(C).
    2. Park, Taehyun & Chang, Ikwhang & Lee, Yoon Ho & Ji, Sanghoon & Cha, Suk Won, 2014. "Analysis of operational characteristics of polymer electrolyte fuel cell with expanded graphite flow-field plates via electrochemical impedance investigation," Energy, Elsevier, vol. 66(C), pages 77-81.
    3. Kim, Jaeyeon & Kim, Hyeok & Song, Hyeonjun & Kim, Dasol & Kim, Geon Hwi & Im, Dasom & Jeong, Youngjin & Park, Taehyun, 2021. "Carbon nanotube sheet as a microporous layer for proton exchange membrane fuel cells," Energy, Elsevier, vol. 227(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Noura Al-Mazrouei & Ali H. Al-Marzouqi & Waleed Ahmed, 2022. "Characterization and Sustainability Potential of Recycling 3D-Printed Nylon Composite Wastes," Sustainability, MDPI, vol. 14(17), pages 1-13, August.
    2. Ho Jun Yoo & Gu Young Cho, 2022. "Effects of Humidification with NaCl Solution Mist on Electrochemical Characteristics of Polymer Electrolyte Membrane Fuel Cells," Sustainability, MDPI, vol. 14(23), pages 1-9, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chang, Huawei & Cai, Fengyang & Yu, Xianxian & Duan, Chen & Chan, Siew Hwa & Tu, Zhengkai, 2023. "Experimental study on the thermal management of an open-cathode air-cooled proton exchange membrane fuel cell stack with ultra-thin metal bipolar plates," Energy, Elsevier, vol. 263(PA).
    2. Guo, Lingyi & Chen, Li & Zhang, Ruiyuan & Peng, Ming & Tao, Wen-Quan, 2022. "Pore-scale simulation of two-phase flow and oxygen reactive transport in gas diffusion layer of proton exchange membrane fuel cells: Effects of nonuniform wettability and porosity," Energy, Elsevier, vol. 253(C).
    3. Yu, Zhongshuai & Liu, Fang & Li, Chengzhang, 2023. "Numerical study on effects of hydrogen ejector on PEMFC performances," Energy, Elsevier, vol. 285(C).
    4. Rahmani, Ebrahim & Moradi, Tofigh & Ghandehariun, Samane & Naterer, Greg F. & Ranjbar, Amirhossein, 2023. "Enhanced mass transfer and water discharge in a proton exchange membrane fuel cell with a raccoon channel flow field," Energy, Elsevier, vol. 264(C).
    5. Ma, Haoran & Liu, Junheng & Liang, Wenwen & Li, Jiyu & Zhao, Wenyao & Sun, Ping & Ji, Qian, 2024. "Effects of PEMFC cooling channel insulation coating on heat transfer and electrical discharge characteristics of nanofluid coolants," Applied Energy, Elsevier, vol. 357(C).
    6. Lin, Rui & Dong, Mengcheng & Lan, Shunbo & Lou, Mingyu, 2023. "Numerical simulation of liquid water transport in perforated cracks of microporous layer," Energy, Elsevier, vol. 262(PB).
    7. Lee, Sanghoon & Lee, Yeageun & Park, Joonho & Yu, Wonjong & Cho, Gu Young & Kim, Yusung & Cha, Suk Won, 2019. "Effect of plasma-enhanced atomic layer deposited YSZ inter-layer on cathode interface of GDC electrolyte in thin film solid oxide fuel cells," Renewable Energy, Elsevier, vol. 144(C), pages 123-128.
    8. Li Guan & Prabhuraj Balakrishnan & Huiyuan Liu & Weiqi Zhang & Yilin Deng & Huaneng Su & Lei Xing & Željko Penga & Qian Xu, 2022. "A Tortuosity Engineered Dual-Microporous Layer Electrode Including Graphene Aerogel Enabling Largely Improved Direct Methanol Fuel Cell Performance with High-Concentration Fuel," Energies, MDPI, vol. 15(24), pages 1-14, December.
    9. Sun, Feng & Su, Dandan & Li, Ping & Lin, Fanxin & Miu, Guodong & Wan, Qi & Yin, Yujie, 2024. "Effects of three-dimensional type flow fields on mass transfer and performance of proton exchange membrane fuel cell," Energy, Elsevier, vol. 295(C).
    10. Hwang, Jenn-Jiang & Dlamini, Mangaliso Menzi & Weng, Fang-Bor & Chang, Tseng & Lin, Chih-Hong & Weng, Shih-Cheng, 2022. "Simulation of fine mesh implementation on the cathode for proton exchange membrane fuel cell (PEMFC)," Energy, Elsevier, vol. 244(PA).
    11. Kwon, Obeen & Kim, Jaeyeon & Choi, Heesoo & Cha, Hyeonjin & Shin, Myunggyu & Jeong, Youngjin & Park, Taehyun, 2022. "CNT sheet as a cathodic functional interlayer in polymer electrolyte membrane fuel cells," Energy, Elsevier, vol. 245(C).
    12. Park, Taehyun & Chang, Ikwhang & Jung, Ju Hae & Lee, Ha Beom & Ko, Seung Hwan & O'Hayre, Ryan & Yoo, Sung Jong & Cha, Suk Won, 2017. "Effect of assembly pressure on the performance of a bendable polymer electrolyte fuel cell based on a silver nanowire current collector," Energy, Elsevier, vol. 134(C), pages 412-419.
    13. Pandu Ranga Tirumalasetti & Fang-Bor Weng & Mangaliso Menzi Dlamini & Chia-Hung Chen, 2024. "Numerical Simulation of Double Layered Wire Mesh Integration on the Cathode for a Proton Exchange Membrane Fuel Cell (PEMFC)," Energies, MDPI, vol. 17(2), pages 1-15, January.
    14. Changhee Song & Sanghoon Lee & Bonhyun Gu & Ikwhang Chang & Gu Young Cho & Jong Dae Baek & Suk Won Cha, 2020. "A Study of Anode-Supported Solid Oxide Fuel Cell Modeling and Optimization Using Neural Network and Multi-Armed Bandit Algorithm," Energies, MDPI, vol. 13(7), pages 1-11, April.
    15. Lee, F.C. & Ismail, M.S. & Ingham, D.B. & Hughes, K.J. & Ma, L & Lyth, S.M. & Pourkashanian, M., 2022. "Alternative architectures and materials for PEMFC gas diffusion layers: A review and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).
    16. Yulin Wang & Xiangling Liao & Guokun Liu & Haokai Xu & Chao Guan & Huixuan Wang & Hua Li & Wei He & Yanzhou Qin, 2023. "Review of Flow Field Designs for Polymer Electrolyte Membrane Fuel Cells," Energies, MDPI, vol. 16(10), pages 1-54, May.
    17. Lee, Jiseung & Salihi, Hassan & Lee, Jaeseung & Ju, Hyunchul, 2022. "Impedance modeling for polymer electrolyte membrane fuel cells by combining the transient two-phase fuel cell and equivalent electric circuit models," Energy, Elsevier, vol. 239(PC).
    18. Kermani, M.J. & Moein-Jahromi, M. & Hasheminasab, M.R. & Ebrahimi, F. & Wei, L. & Guo, J. & Jiang, F.M., 2022. "Application of a foam-based functionally graded porous material flow-distributor to PEM fuel cells," Energy, Elsevier, vol. 254(PB).
    19. Chen, Ben & Deng, Qihao & Yang, Guanghua & Zhou, Yu & Chen, Wenshang & Cai, Yonghua & Tu, Zhengkai, 2023. "Numerical study on heat transfer characteristics and performance evaluation of PEMFC based on multiphase electrochemical model coupled with cooling channel," Energy, Elsevier, vol. 285(C).
    20. Iranzo, Alfredo & Boillat, Pierre, 2018. "CFD simulation of the transient gas transport in a PEM fuel cell cathode during AC impedance testing considering liquid water effects," Energy, Elsevier, vol. 158(C), pages 449-457.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:5:p:2997-:d:763942. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.