IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v12y2019i1p196-d301868.html
   My bibliography  Save this article

Photogrammetry for Concentrating Solar Collector Form Measurement, Validated Using a Coordinate Measuring Machine

Author

Listed:
  • Peter King

    (Centre for Renewable Energy Systems, Cranfield University, Bedford, Bedfordshire MK43 0AL, UK)

  • Christopher Sansom

    (Centre for Renewable Energy Systems, Cranfield University, Bedford, Bedfordshire MK43 0AL, UK)

  • Paul Comley

    (Centre for Renewable Energy Systems, Cranfield University, Bedford, Bedfordshire MK43 0AL, UK)

Abstract

Concentrating solar power systems currently have a high capital cost when compared with other energy generating systems. The solar energy is captured in the form of thermal energy rather than direct electrical, which is attractive as thermal energy is more straightforward and currently more cost-effective to store in the amounts required for extended plant operation. It is also used directly as industrial process heat, including desalination and water purification. For the technology to compete against other generating systems, it is crucial to reduce the electrical energy cost to less than $0.10 per kilowatt-hour. One of the significant capital costs is the solar field, which contains the concentrators. Novel constructions and improvements to the durability and lifetime of the concentrators are required to reduce the cost of this field. This paper describes the development and validation of an inexpensive, highly portable photogrammetry technique, which has been used to measure the shape of large mirror facets for solar collectors. The accuracy of the technique has been validated to show a whole surface measurement capability of better than 100 m using a large coordinate measuring machine. Qualification of facets of the MATS plant was performed during its installation phase, giving results of the shape, slope and intercept errors over each facet.

Suggested Citation

  • Peter King & Christopher Sansom & Paul Comley, 2019. "Photogrammetry for Concentrating Solar Collector Form Measurement, Validated Using a Coordinate Measuring Machine," Sustainability, MDPI, vol. 12(1), pages 1-20, December.
    • Handle: RePEc:gam:jsusta:v:12:y:2019:i:1:p:196-:d:301868
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/12/1/196/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/12/1/196/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Skouri, Safa & Ben Haj Ali, Abdessalem & Bouadila, Salwa & Ben Nasrallah, Sassi, 2015. "Optical qualification of a solar parabolic concentrator using photogrammetry technique," Energy, Elsevier, vol. 90(P1), pages 403-416.
    2. Arancibia-Bulnes, Camilo A. & Peña-Cruz, Manuel I. & Mutuberría, Amaia & Díaz-Uribe, Rufino & Sánchez-González, Marcelino, 2017. "A survey of methods for the evaluation of reflective solar concentrator optics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 673-684.
    3. García-Cortés, Silverio & Bello-García, Antonio & Ordóñez, Celestino, 2012. "Estimating intercept factor of a parabolic solar trough collector with new supporting structure using off-the-shelf photogrammetric equipment," Applied Energy, Elsevier, vol. 92(C), pages 815-821.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kexin Zhang & Ying Su & Haiyu Wang & Qian Wang & Kai Wang & Yisen Niu & Jifeng Song, 2022. "Highly Concentrated Solar Flux of Large Fresnel Lens Using CCD Camera-Based Method," Sustainability, MDPI, vol. 14(17), pages 1-16, September.
    2. Jose Manuel Barrera & Alejandro Reina & Alejandro Maté & Juan Carlos Trujillo, 2020. "Solar Energy Prediction Model Based on Artificial Neural Networks and Open Data," Sustainability, MDPI, vol. 12(17), pages 1-20, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Salamanca, Santiago & Merchán, Pilar & Adán, Antonio & Pérez, Emiliano, 2019. "An appraisal of the geometry and energy efficiency of parabolic trough collectors with laser scanners and image processing," Renewable Energy, Elsevier, vol. 134(C), pages 64-77.
    2. Arancibia-Bulnes, Camilo A. & Peña-Cruz, Manuel I. & Mutuberría, Amaia & Díaz-Uribe, Rufino & Sánchez-González, Marcelino, 2017. "A survey of methods for the evaluation of reflective solar concentrator optics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 673-684.
    3. Silva, R. & Pérez, M. & Fernández-Garcia, A., 2013. "Modeling and co-simulation of a parabolic trough solar plant for industrial process heat," Applied Energy, Elsevier, vol. 106(C), pages 287-300.
    4. Skouri, Safa & Ben Haj Ali, Abdessalem & Bouadila, Salwa & Ben Nasrallah, Sassi, 2015. "Optical qualification of a solar parabolic concentrator using photogrammetry technique," Energy, Elsevier, vol. 90(P1), pages 403-416.
    5. Li, Sha & Xu, Guoqiang & Luo, Xiang & Quan, Yongkai & Ge, Yunting, 2016. "Optical performance of a solar dish concentrator/receiver system: Influence of geometrical and surface properties of cavity receiver," Energy, Elsevier, vol. 113(C), pages 95-107.
    6. Gallardo-Saavedra, Sara & Hernández-Callejo, Luis & Duque-Perez, Oscar, 2018. "Technological review of the instrumentation used in aerial thermographic inspection of photovoltaic plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 93(C), pages 566-579.
    7. Xiao, Gang & Yang, Tianfeng & Ni, Dong & Cen, Kefa & Ni, Mingjiang, 2017. "A model-based approach for optical performance assessment and optimization of a solar dish," Renewable Energy, Elsevier, vol. 100(C), pages 103-113.
    8. Bonanos, A.M. & Faka, M. & Abate, D. & Hermon, S. & Blanco, M.J., 2019. "Heliostat surface shape characterization for accurate flux prediction," Renewable Energy, Elsevier, vol. 142(C), pages 30-40.
    9. Xu, Chengmu & Chen, Zhiping & Li, Ming & Zhang, Peng & Ji, Xu & Luo, Xi & Liu, Jiangtao, 2014. "Research on the compensation of the end loss effect for parabolic trough solar collectors," Applied Energy, Elsevier, vol. 115(C), pages 128-139.
    10. Yang, Bin & Liu, Shuaishuai & Zhang, Ruirui & Yu, Xiaohui, 2022. "Influence of reflector installation errors on optical-thermal performance of parabolic trough collectors based on a MCRT - FVM coupled model," Renewable Energy, Elsevier, vol. 185(C), pages 1006-1017.
    11. Jebasingh, V.K. & Herbert, G.M. Joselin, 2016. "A review of solar parabolic trough collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1085-1091.
    12. Joseph Oyekale & Mario Petrollese & Vittorio Tola & Giorgio Cau, 2020. "Impacts of Renewable Energy Resources on Effectiveness of Grid-Integrated Systems: Succinct Review of Current Challenges and Potential Solution Strategies," Energies, MDPI, vol. 13(18), pages 1-48, September.
    13. Liu, YongXiang & Yan, Jian & Xie, XinYi & Peng, YouDuo & Nie, DuZhong, 2023. "Improving the energy distribution uniformity of solar dish collector system under tracking error using a cavity receiver position adjustment method," Energy, Elsevier, vol. 278(PA).
    14. Hachicha, A.A. & Rodríguez, I. & Capdevila, R. & Oliva, A., 2013. "Heat transfer analysis and numerical simulation of a parabolic trough solar collector," Applied Energy, Elsevier, vol. 111(C), pages 581-592.
    15. Cheng, Ze-Dong & Zhao, Xue-Ru & He, Ya-Ling, 2018. "Novel optical efficiency formulas for parabolic trough solar collectors: Computing method and applications," Applied Energy, Elsevier, vol. 224(C), pages 682-697.
    16. Gabriele Guidi & Umair Shafqat Malik & Andrea Manes & Stefano Cardamone & Massimo Fossati & Carla Lazzari & Claudio Volpato & Marco Giglio, 2020. "Laser Scanner-Based 3D Digitization for the Reflective Shape Measurement of a Parabolic Trough Collector," Energies, MDPI, vol. 13(21), pages 1-21, October.
    17. Miguel Terrón-Hernández & Manuel I. Peña-Cruz & Jose G. Carrillo & Ulises Diego-Ayala & Vicente Flores, 2018. "Solar Ray Tracing Analysis to Determine Energy Availability in a CPC Designed for Use as a Residential Water Heater," Energies, MDPI, vol. 11(2), pages 1-18, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:12:y:2019:i:1:p:196-:d:301868. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.