IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v11y2019i23p6614-d290059.html
   My bibliography  Save this article

Overcoming the Main Barriers of Circular Economy Implementation through a New Visualization Tool for Circular Business Models

Author

Listed:
  • Augusto Bianchini

    (Department of Industrial Engineering, University of Bologna, 47121 Forlì, Italy)

  • Jessica Rossi

    (Department of Industrial Engineering, University of Bologna, 47121 Forlì, Italy)

  • Marco Pellegrini

    (Department of Industrial Engineering, University of Bologna, 47121 Forlì, Italy)

Abstract

There is a huge gap between the broad concept of circular economy (CE) and its practical implementation in the industrial sector due to several types of barriers, which shall be led back to the lack of consistent and precise information about resources, products, and processes. Without a proper information flow, it is impossible to quantify circular initiatives, both in comparison with the actual linear situation or with circular alternative opportunities. A proper quantification of circular initiatives allows the assessment of economic, environmental and social benefits and the preventative identification of potential barriers and relative solutions, monitoring the risk associated with circular investments and supporting the decision-making process. This paper describes a new tool to ensure the quantification of circular initiatives and the method to define it. It is a new Circular Business Model (CBM) visualization tool, which overcomes the main limitations of the existing models able to explain CE concepts but not to boost its practical implementation in industry. The new CBM visualization tool can be adopted in every industrial sector to highlight circular opportunities that are still hidden or unexploited or to select the best CE strategy. The proposed CBM visualization tool differs from the previous diagrams in two main characteristics: (i) the possibility to quantify resource flows and important indicators representing energy consumption, environmental and social impact, and (ii) the focus, which is not only on the product, but on the whole system, involving also the process, the company and the entire supply chain. The methodology to adopt and adapt the proposed model to different scales is described in detail. To provide a practical example, the model was qualitatively applied to a generic technical product to highlight its potential in the identification and quantification of circular activities.

Suggested Citation

  • Augusto Bianchini & Jessica Rossi & Marco Pellegrini, 2019. "Overcoming the Main Barriers of Circular Economy Implementation through a New Visualization Tool for Circular Business Models," Sustainability, MDPI, vol. 11(23), pages 1-33, November.
    • Handle: RePEc:gam:jsusta:v:11:y:2019:i:23:p:6614-:d:290059
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/11/23/6614/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/11/23/6614/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Walmsley, Timothy Gordon & Ong, Benjamin H.Y. & Klemeš, Jiří Jaromír & Tan, Raymond R. & Varbanov, Petar Sabev, 2019. "Circular Integration of processes, industries, and economies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 107(C), pages 507-515.
    2. Vasileios Rizos & Arno Behrens & Wytze Van der Gaast & Erwin Hofman & Anastasia Ioannou & Terri Kafyeke & Alexandros Flamos & Roberto Rinaldi & Sotiris Papadelis & Martin Hirschnitz-Garbers & Corrado , 2016. "Implementation of Circular Economy Business Models by Small and Medium-Sized Enterprises (SMEs): Barriers and Enablers," Sustainability, MDPI, vol. 8(11), pages 1-18, November.
    3. Levänen, Jarkko & Lyytinen, Tatu & Gatica, Sebastian, 2018. "Modelling the Interplay Between Institutions and Circular Economy Business Models: A Case Study of Battery Recycling in Finland and Chile," Ecological Economics, Elsevier, vol. 154(C), pages 373-382.
    4. Nigel Roome & Céline Louche, 2016. "Journeying Toward Business Models for Sustainability: A Conceptual Model Found Inside the Black Box of Organisational Transformation," Post-Print hal-01183743, HAL.
    5. de Jesus, Ana & Mendonça, Sandro, 2018. "Lost in Transition? Drivers and Barriers in the Eco-innovation Road to the Circular Economy," Ecological Economics, Elsevier, vol. 145(C), pages 75-89.
    6. Chris Turner & Mariale Moreno & Luigi Mondini & Konstantinos Salonitis & Fiona Charnley & Ashutosh Tiwari & Windo Hutabarat, 2019. "Sustainable Production in a Circular Economy: A Business Model for Re-Distributed Manufacturing," Sustainability, MDPI, vol. 11(16), pages 1-19, August.
    7. Antonio Barragán-Escandón & Julio Terrados-Cepeda & Esteban Zalamea-León, 2017. "The Role of Renewable Energy in the Promotion of Circular Urban Metabolism," Sustainability, MDPI, vol. 9(12), pages 1-29, December.
    8. Daniel Guzzo & Adriana Hofmann Trevisan & Marcia Echeveste & Janaina Mascarenhas Hornos Costa, 2019. "Circular Innovation Framework: Verifying Conceptual to Practical Decisions in Sustainability-Oriented Product-Service System Cases," Sustainability, MDPI, vol. 11(12), pages 1-29, June.
    9. García-Barragán, Juan F. & Eyckmans, Johan & Rousseau, Sandra, 2019. "Defining and Measuring the Circular Economy: A Mathematical Approach," Ecological Economics, Elsevier, vol. 157(C), pages 369-372.
    10. Naoum Tsolakis & Jagjit Singh Srai, 2018. "Mapping supply dynamics in renewable feedstock enabled industries: A systems theory perspective on ‘green’ pharmaceuticals," Operations Management Research, Springer, vol. 11(3), pages 83-104, December.
    11. Augusto Bianchini & Jessica Rossi & Lauro Antipodi, 2018. "A procedure for condition-based maintenance and diagnostics of submersible well pumps through vibration monitoring," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 9(5), pages 999-1013, October.
    12. Friedrich A. Halstenberg & Kai Lindow & Rainer Stark, 2019. "Leveraging Circular Economy through a Methodology for Smart Service Systems Engineering," Sustainability, MDPI, vol. 11(13), pages 1-36, June.
    13. Nasir, Mohammed Haneef Abdul & Genovese, Andrea & Acquaye, Adolf A. & Koh, S.C.L. & Yamoah, Fred, 2017. "Comparing linear and circular supply chains: A case study from the construction industry," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 443-457.
    14. Donato Masi & Steven Day & Janet Godsell, 2017. "Supply Chain Configurations in the Circular Economy: A Systematic Literature Review," Sustainability, MDPI, vol. 9(9), pages 1-22, September.
    15. Alicia Mas-Tur & Maria Guijarro & Agustín Carrilero, 2019. "The Influence of the Circular Economy: Exploring the Knowledge Base," Sustainability, MDPI, vol. 11(16), pages 1-19, August.
    16. Andreas Mayer & Willi Haas & Dominik Wiedenhofer & Fridolin Krausmann & Philip Nuss & Gian Andrea Blengini, 2019. "Measuring Progress towards a Circular Economy: A Monitoring Framework for Economy‐wide Material Loop Closing in the EU28," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 62-76, February.
    17. Marcus Linder & Mats Williander, 2017. "Circular Business Model Innovation: Inherent Uncertainties," Business Strategy and the Environment, Wiley Blackwell, vol. 26(2), pages 182-196, February.
    18. Mateusz Lewandowski, 2016. "Designing the Business Models for Circular Economy—Towards the Conceptual Framework," Sustainability, MDPI, vol. 8(1), pages 1-28, January.
    19. Gianmarco Bressanelli & Federico Adrodegari & Marco Perona & Nicola Saccani, 2018. "Exploring How Usage-Focused Business Models Enable Circular Economy through Digital Technologies," Sustainability, MDPI, vol. 10(3), pages 1-21, February.
    20. Augusto Bianchini & Marco Pellegrini & Jessica Rossi, 2019. "Maintenance scheduling optimization for industrial centrifugal pumps," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(4), pages 848-860, August.
    21. José Roberto Mendoza-Fong & Jorge Luis García-Alcaraz & Emilio Jiménez Macías & Nancy Liliana Ibarra Hernández & José Roberto Díaz-Reza & Julio Blanco Fernández, 2018. "Role of Information and Communication Technology in Green Supply Chain Implementation and Companies’ Performance," Sustainability, MDPI, vol. 10(6), pages 1-16, May.
    22. Todeschini, Bruna Villa & Cortimiglia, Marcelo Nogueira & Callegaro-de-Menezes, Daniela & Ghezzi, Antonio, 2017. "Innovative and sustainable business models in the fashion industry: Entrepreneurial drivers, opportunities, and challenges," Business Horizons, Elsevier, vol. 60(6), pages 759-770.
    23. Korhonen, Jouni & Honkasalo, Antero & Seppälä, Jyri, 2018. "Circular Economy: The Concept and its Limitations," Ecological Economics, Elsevier, vol. 143(C), pages 37-46.
    24. Jabbour, Charbel Jose Chiappetta & Jabbour, Ana Beatriz Lopes de Sousa & Sarkis, Joseph & Filho, Moacir Godinho, 2019. "Unlocking the circular economy through new business models based on large-scale data: An integrative framework and research agenda," Technological Forecasting and Social Change, Elsevier, vol. 144(C), pages 546-552.
    25. Andrea Urbinati & Davide Chiaroni & Giovanni Toletti, 2019. "Managing the Introduction of Circular Products: Evidence from the Beverage Industry," Sustainability, MDPI, vol. 11(13), pages 1-12, July.
    26. Havemo, Emelie, 2018. "A visual perspective on value creation: Exploring patterns in business model diagrams," European Management Journal, Elsevier, vol. 36(4), pages 441-452.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marcos Ferasso & Tatiana Beliaeva & Sascha Kraus & Thomas Clauss & Domingo Ribeiro‐Soriano, 2020. "Circular economy business models: The state of research and avenues ahead," Business Strategy and the Environment, Wiley Blackwell, vol. 29(8), pages 3006-3024, December.
    2. Armaghan Chizaryfard & Paolo Trucco & Cali Nuur, 2021. "The transformation to a circular economy: framing an evolutionary view," Journal of Evolutionary Economics, Springer, vol. 31(2), pages 475-504, April.
    3. Davide Aloini & Riccardo Dulmin & Valeria Mininno & Alessandro Stefanini & Pierluigi Zerbino, 2020. "Driving the Transition to a Circular Economic Model: A Systematic Review on Drivers and Critical Success Factors in Circular Economy," Sustainability, MDPI, vol. 12(24), pages 1-14, December.
    4. Kerem Toker & Ali Görener, 2023. "Evaluation of circular economy business models for SMEs using spherical fuzzy TOPSIS: an application from a developing countries’ perspective," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(2), pages 1700-1741, February.
    5. Zhen Liu & Jing Liu & Mohamed Osmani, 2021. "Integration of Digital Economy and Circular Economy: Current Status and Future Directions," Sustainability, MDPI, vol. 13(13), pages 1-27, June.
    6. Maria Rosa De Giacomo & Raimund Bleischwitz, 2020. "Business models for environmental sustainability: Contemporary shortcomings and some perspectives," Business Strategy and the Environment, Wiley Blackwell, vol. 29(8), pages 3352-3369, December.
    7. Ida K. Rovanto & Anu Bask, 2021. "Systemic circular business model application at the company, supply chain and society levels—A view into circular economy native and adopter companies," Business Strategy and the Environment, Wiley Blackwell, vol. 30(2), pages 1153-1173, February.
    8. Bhavesh Kumar & Love Kumar & Avinash Kumar & Ramna Kumari & Uroosa Tagar & Claudio Sassanelli, 2024. "Green finance in circular economy: a literature review," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 26(7), pages 16419-16459, July.
    9. Ana de Jesus & Minna Lammi & Teresa Domenech & Fedra Vanhuyse & Sandro Mendonça, 2021. "Eco-Innovation Diversity in a Circular Economy: Towards Circular Innovation Studies," Sustainability, MDPI, vol. 13(19), pages 1-22, October.
    10. Alfonso Aranda-Usón & Pilar Portillo-Tarragona & Luz María Marín-Vinuesa & Sabina Scarpellini, 2019. "Financial Resources for the Circular Economy: A Perspective from Businesses," Sustainability, MDPI, vol. 11(3), pages 1-23, February.
    11. Nathalia Suchek & João J. Ferreira & Paula O. Fernandes, 2022. "A review of entrepreneurship and circular economy research: State of the art and future directions," Business Strategy and the Environment, Wiley Blackwell, vol. 31(5), pages 2256-2283, July.
    12. Ingvild Reine Assmann & Francesco Rosati & Sandra Naomi Morioka, 2023. "Determinants of circular business model adoption—A systematic literature review," Business Strategy and the Environment, Wiley Blackwell, vol. 32(8), pages 6008-6028, December.
    13. Piera Centobelli & Roberto Cerchione & Davide Chiaroni & Pasquale Del Vecchio & Andrea Urbinati, 2020. "Designing business models in circular economy: A systematic literature review and research agenda," Business Strategy and the Environment, Wiley Blackwell, vol. 29(4), pages 1734-1749, May.
    14. German Arana‐Landin & Waleska Sigüenza & Beñat Landeta‐Manzano & Iker Laskurain‐Iturbe, 2024. "Circular economy: On the road to ISO 59000 family of standards," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 31(3), pages 1977-2009, May.
    15. Claudia Aparecida De Mattos & Thiago Lourenço Meira De Albuquerque, 2018. "Enabling Factors and Strategies for the Transition Toward a Circular Economy (CE)," Sustainability, MDPI, vol. 10(12), pages 1-18, December.
    16. Graziela Darla Araujo Galvão & Steve Evans & Paulo Sergio Scoleze Ferrer & Marly Monteiro de Carvalho, 2022. "Circular business model: Breaking down barriers towards sustainable development," Business Strategy and the Environment, Wiley Blackwell, vol. 31(4), pages 1504-1524, May.
    17. Antonella Zucchella & Pietro Previtali & Roger Strange, 2022. "Proactive and reactive views in the transition towards circular business models. A grounded study in the plastic packaging industry," International Entrepreneurship and Management Journal, Springer, vol. 18(3), pages 1073-1102, September.
    18. Nallapaneni Manoj Kumar & Shauhrat S. Chopra, 2022. "Leveraging Blockchain and Smart Contract Technologies to Overcome Circular Economy Implementation Challenges," Sustainability, MDPI, vol. 14(15), pages 1-18, August.
    19. Gilbert Silvius & Aydan Ismayilova & Vicente Sales-Vivó & Micol Costi, 2021. "Exploring Barriers for Circularity in the EU Furniture Industry," Sustainability, MDPI, vol. 13(19), pages 1-25, October.
    20. Gabi Försterling & Ronald Orth & Benjamin Gellert, 2023. "Transition to a Circular Economy in Europe through New Business Models: Barriers, Drivers, and Policy Making," Sustainability, MDPI, vol. 15(10), pages 1-40, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:11:y:2019:i:23:p:6614-:d:290059. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.