IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v10y2018i12p4486-d186289.html
   My bibliography  Save this article

A Comprehensive Review of Backfill Materials and Their Effects on Ground Heat Exchanger Performance

Author

Listed:
  • Hossein Javadi

    (Department of Mechanical Engineering, Mazandaran University of Science and Technology, Babol 47166-85635, Iran)

  • Seyed Soheil Mousavi Ajarostaghi

    (Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol 47148-71167, Iran)

  • Marc A. Rosen

    (Faculty of Engineering and Applied Science, University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, ON L1G 0C5, Canada)

  • Mohsen Pourfallah

    (Department of Mechanical Engineering, Mazandaran University of Science and Technology, Babol 47166-85635, Iran)

Abstract

Geothermal energy systems can help in achieving an environmentally friendly and more efficient energy utilization, as well as enhanced power generation and building heating/cooling, thereby making energy systems more sustainable. The role of the backfill material, which fills the space between a pipe and the surrounding soil, is important in the operation of ground heat exchangers. Among the review articles on parameters affecting ground heat exchanger performance published over the past eight years, only two discuss types of backfill materials, even though the importance of these materials is significant. However, no review has yet been published exclusively on the kinds of backfill materials used in ground heat exchangers. This article addresses this need by providing a comprehensive review of a variety of types of backfill materials and their effects on ground heat exchanger performance. For organizational purposes, the backfill materials are divided into two categories: conventional backfill materials (pure and mixed materials) and modern backfill materials (improved phase change materials). Both categories are described in detail. It is shown that bentonite has been used considerably as a conventional backfill material in ground heat exchangers, followed by silica sand and coarse/fine sand. Moreover, acid and shape-stabilized phase change materials have been applied mostly as modern backfill materials in ground heat exchangers. It is observed, generally, that conventional backfill materials are used more than modern backfill materials in ground heat exchangers. It should be noted that the data covered in this study are not from all the articles published in the last eight years, but rather from a subset based on specific criteria (i.e., English-language papers published in reputable journals). These articles were published by authors from numerous countries. The results may, as a consequence, have some corresponding limitations, but these are likely to be minor.

Suggested Citation

  • Hossein Javadi & Seyed Soheil Mousavi Ajarostaghi & Marc A. Rosen & Mohsen Pourfallah, 2018. "A Comprehensive Review of Backfill Materials and Their Effects on Ground Heat Exchanger Performance," Sustainability, MDPI, vol. 10(12), pages 1-22, November.
    • Handle: RePEc:gam:jsusta:v:10:y:2018:i:12:p:4486-:d:186289
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/10/12/4486/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/10/12/4486/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Luca Alberti & Adriana Angelotti & Matteo Antelmi & Ivana La Licata, 2017. "A Numerical Study on the Impact of Grouting Material on Borehole Heat Exchangers Performance in Aquifers," Energies, MDPI, vol. 10(5), pages 1-15, May.
    2. Mohammed Fouad Alnahhal & Ubagaram Johnson Alengaram & Mohd Zamin Jumaat & Mamoun A. Alqedra & Kim Hung Mo & Mathialagan Sumesh, 2017. "Evaluation of Industrial By-Products as Sustainable Pozzolanic Materials in Recycled Aggregate Concrete," Sustainability, MDPI, vol. 9(5), pages 1-23, May.
    3. Thed N. Van Leeuwen & Henk F. Moed & Robert J. W. Tijssen & Martijn S. Visser & Anthony F. J. Van Raan, 2001. "Language biases in the coverage of the Science Citation Index and its consequencesfor international comparisons of national research performance," Scientometrics, Springer;Akadémiai Kiadó, vol. 51(1), pages 335-346, April.
    4. Kong, Minsuk & Alvarado, Jorge L. & Thies, Curt & Morefield, Sean & Marsh, Charles P., 2017. "Field evaluation of microencapsulated phase change material slurry in ground source heat pump systems," Energy, Elsevier, vol. 122(C), pages 691-700.
    5. Luigi Coppola & Denny Coffetti & Elena Crotti, 2018. "Plain and Ultrafine Fly Ashes Mortars for Environmentally Friendly Construction Materials," Sustainability, MDPI, vol. 10(3), pages 1-15, March.
    6. Dincer, Ibrahim & Rosen, Marc A., 2005. "Thermodynamic aspects of renewables and sustainable development," Renewable and Sustainable Energy Reviews, Elsevier, vol. 9(2), pages 169-189, April.
    7. Kim, Daehoon & Kim, Gyoungman & Kim, Donghui & Baek, Hwanjo, 2017. "Experimental and numerical investigation of thermal properties of cement-based grouts used for vertical ground heat exchanger," Renewable Energy, Elsevier, vol. 112(C), pages 260-267.
    8. Tian, Y. & Zhao, C.Y., 2011. "A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals," Energy, Elsevier, vol. 36(9), pages 5539-5546.
    9. Viviana Letelier & José Marcos Ortega & Ester Tarela & Pedro Muñoz & Bastián I. Henríquez-Jara & Giacomo Moriconi, 2018. "Mechanical Performance of Eco-Friendly Concretes with Volcanic Powder and Recycled Concrete Aggregates," Sustainability, MDPI, vol. 10(9), pages 1-17, August.
    10. Afonso Miguel Solak & Antonio José Tenza-Abril & José Miguel Saval & Victoria Eugenia García-Vera, 2018. "Effects of Multiple Supplementary Cementitious Materials on Workability and Segregation Resistance of Lightweight Aggregate Concrete," Sustainability, MDPI, vol. 10(11), pages 1-14, November.
    11. Choi, Wonjun & Ooka, Ryozo, 2016. "Effect of natural convection on thermal response test conducted in saturated porous formation: Comparison of gravel-backfilled and cement-grouted borehole heat exchangers," Renewable Energy, Elsevier, vol. 96(PA), pages 891-903.
    12. Jun, Liu & Xu, Zhang & Jun, Gao & Jie, Yang, 2009. "Evaluation of heat exchange rate of GHE in geothermal heat pump systems," Renewable Energy, Elsevier, vol. 34(12), pages 2898-2904.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hossein Javadi & Javier F. Urchueguia & Seyed Soheil Mousavi Ajarostaghi & Borja Badenes, 2021. "Impact of Employing Hybrid Nanofluids as Heat Carrier Fluid on the Thermal Performance of a Borehole Heat Exchanger," Energies, MDPI, vol. 14(10), pages 1-26, May.
    2. Hossein Javadi & Javier F. Urchueguia & Seyed Soheil Mousavi Ajarostaghi & Borja Badenes, 2020. "Numerical Study on the Thermal Performance of a Single U-Tube Borehole Heat Exchanger Using Nano-Enhanced Phase Change Materials," Energies, MDPI, vol. 13(19), pages 1-30, October.
    3. Ilayda Berktas & Ali Nejad Ghafar & Patrick Fontana & Ayten Caputcu & Yusuf Menceloglu & Burcu Saner Okan, 2020. "Synergistic Effect of Expanded Graphite-Silane Functionalized Silica as a Hybrid Additive in Improving the Thermal Conductivity of Cementitious Grouts with Controllable Water Uptake," Energies, MDPI, vol. 13(14), pages 1-15, July.
    4. Luka Boban & Dino Miše & Stjepan Herceg & Vladimir Soldo, 2021. "Application and Design Aspects of Ground Heat Exchangers," Energies, MDPI, vol. 14(8), pages 1-31, April.
    5. Javadi, Hossein & Mousavi Ajarostaghi, Seyed Soheil & Rosen, Marc A. & Pourfallah, Mohsen, 2019. "Performance of ground heat exchangers: A comprehensive review of recent advances," Energy, Elsevier, vol. 178(C), pages 207-233.
    6. Fabio Minchio & Gabriele Cesari & Claudio Pastore & Marco Fossa, 2020. "Experimental Hydration Temperature Increase in Borehole Heat Exchangers during Thermal Response Tests for Geothermal Heat Pump Design," Energies, MDPI, vol. 13(13), pages 1-16, July.
    7. Urchueguia, Javier F. & Badenes, Borja & Mateo Pla, Miguel A. & Armengot, Bruno & Javadi, Hossein, 2024. "New trilobular geometry using advanced materials for experimentally validated enhanced heat transfer in shallow geothermal applications," Renewable Energy, Elsevier, vol. 222(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khaled Salhein & C. J. Kobus & Mohamed Zohdy, 2022. "Control of Heat Transfer in a Vertical Ground Heat Exchanger for a Geothermal Heat Pump System," Energies, MDPI, vol. 15(14), pages 1-24, July.
    2. Afonso Miguel Solak & Antonio José Tenza-Abril & José Miguel Saval & Victoria Eugenia García-Vera, 2018. "Effects of Multiple Supplementary Cementitious Materials on Workability and Segregation Resistance of Lightweight Aggregate Concrete," Sustainability, MDPI, vol. 10(11), pages 1-14, November.
    3. Daehoon Kim & Seokhoon Oh, 2018. "Optimizing the Design of a Vertical Ground Heat Exchanger: Measurement of the Thermal Properties of Bentonite-Based Grout and Numerical Analysis," Sustainability, MDPI, vol. 10(8), pages 1-15, July.
    4. Davide Menegazzo & Giulia Lombardo & Sergio Bobbo & Michele De Carli & Laura Fedele, 2022. "State of the Art, Perspective and Obstacles of Ground-Source Heat Pump Technology in the European Building Sector: A Review," Energies, MDPI, vol. 15(7), pages 1-25, April.
    5. Wang, Zhaoyu & Feng, Weijian & Zhang, Nan & Zhang, Jinghong & Li, Qi & Wang, Weida & Rui, Chaofeng & Wang, Mao & Tang, Junjie & Zheng, Dechen, 2024. "Experimental study on enhanced heat transfer mechanism of U-shaped buried pipe by bio-microbial method," Renewable Energy, Elsevier, vol. 224(C).
    6. Karytsas, Spyridon & Choropanitis, Ioannis, 2017. "Barriers against and actions towards renewable energy technologies diffusion: A Principal Component Analysis for residential ground source heat pump (GSHP) systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 252-271.
    7. Javadi, Hossein & Mousavi Ajarostaghi, Seyed Soheil & Rosen, Marc A. & Pourfallah, Mohsen, 2019. "Performance of ground heat exchangers: A comprehensive review of recent advances," Energy, Elsevier, vol. 178(C), pages 207-233.
    8. Luka Boban & Dino Miše & Stjepan Herceg & Vladimir Soldo, 2021. "Application and Design Aspects of Ground Heat Exchangers," Energies, MDPI, vol. 14(8), pages 1-31, April.
    9. Goodall, Amanda H., 2009. "Highly cited leaders and the performance of research universities," Research Policy, Elsevier, vol. 38(7), pages 1079-1092, September.
    10. Domingo Docampo & Lawrence Cram, 2019. "Highly cited researchers: a moving target," Scientometrics, Springer;Akadémiai Kiadó, vol. 118(3), pages 1011-1025, March.
    11. Zhao, Dongliang & Tan, Gang, 2015. "Numerical analysis of a shell-and-tube latent heat storage unit with fins for air-conditioning application," Applied Energy, Elsevier, vol. 138(C), pages 381-392.
    12. Xu, Yang & Li, Ming-Jia & Zheng, Zhang-Jing & Xue, Xiao-Dai, 2018. "Melting performance enhancement of phase change material by a limited amount of metal foam: Configurational optimization and economic assessment," Applied Energy, Elsevier, vol. 212(C), pages 868-880.
    13. Xu, Yang & Ren, Qinlong & Zheng, Zhang-Jing & He, Ya-Ling, 2017. "Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media," Applied Energy, Elsevier, vol. 193(C), pages 84-95.
    14. Zhang, Changxing & Song, Wei & Liu, Yufeng & Kong, Xiangqiang & Wang, Qing, 2019. "Effect of vertical ground temperature distribution on parameter estimation of in-situ thermal response test with unstable heat rate," Renewable Energy, Elsevier, vol. 136(C), pages 264-274.
    15. Li, W.Q. & Qu, Z.G. & Zhang, B.L. & Zhao, K. & Tao, W.Q., 2013. "Thermal behavior of porous stainless-steel fiber felt saturated with phase change material," Energy, Elsevier, vol. 55(C), pages 846-852.
    16. Yves Gingras & Mahdi Khelfaoui, 2018. "Assessing the effect of the United States’ “citation advantage” on other countries’ scientific impact as measured in the Web of Science (WoS) database," Scientometrics, Springer;Akadémiai Kiadó, vol. 114(2), pages 517-532, February.
    17. Nielsen, S.N. & Müller, F., 2009. "Understanding the functional principles of nature—Proposing another type of ecosystem services," Ecological Modelling, Elsevier, vol. 220(16), pages 1913-1925.
    18. van der Kroon, Bianca & Brouwer, Roy & van Beukering, Pieter J.H., 2013. "The energy ladder: Theoretical myth or empirical truth? Results from a meta-analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 504-513.
    19. Adel Eswiasi & Phalguni Mukhopadhyaya, 2021. "Performance of Conventional and Innovative Single U-Tube Pipe Configuration in Vertical Ground Heat Exchanger (VGHE)," Sustainability, MDPI, vol. 13(11), pages 1-15, June.
    20. Henk F. Moed, 2002. "Measuring China"s research performance using the Science Citation Index," Scientometrics, Springer;Akadémiai Kiadó, vol. 53(3), pages 281-296, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:10:y:2018:i:12:p:4486-:d:186289. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.