IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i5p2103-d1075980.html
   My bibliography  Save this article

Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling

Author

Listed:
  • Juan Jin

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Weidong Jiang

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Jiandong Liu

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Junfeng Shi

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Xiaowen Zhang

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Wei Cheng

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Ziniu Yu

    (Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
    Key Laboratory of Oil and Gas Production, CNPC, Beijing 100083, China)

  • Weixi Chen

    (Engineering and Technology Department, Qinghai Oilfield, PetroChina, Dunhuang 736202, China)

  • Tingfu Ye

    (Drilling and Production Technology Research Institute of Qinghai Oilfield PetroChina, Dunhuang 736202, China)

Abstract

The in situ conversion process (ICP) is a retorting method pyrolyzing the kerogen in shale into oil and gas products, which shows great potential to promote the recovery of oil shale resources. In this work, a thermo-hydro-chemical-coupled model for the in situ conversion process is established, considering the temperature dependence of key properties and the transverse isotropy caused by the layered characteristics of oil shale. Based on the proposed model, a series of simulations is conducted to evaluate the production performance of the in situ conversion process of oil shale reservoirs. The results indicate that energy efficiency reaches a maximum of 2.7 around the fifth year of the heating process, indicating the feasibility of in situ conversion technology. Furthermore, the sensitivity analysis shows that the heating temperature should be higher than 300 °C to avoid the energy output being less than the energy input, and the oil/gas ratio decreases with increasing heating temperature. Moreover, thermal conductivity is positively with production while heat capacity is negatively correlated, and the energy efficiency decreases with increasing thermal conductivity and matrix heat capacity. Finally, the heating period should be no longer than 4 years to maximize the heating efficiency.

Suggested Citation

  • Juan Jin & Weidong Jiang & Jiandong Liu & Junfeng Shi & Xiaowen Zhang & Wei Cheng & Ziniu Yu & Weixi Chen & Tingfu Ye, 2023. "Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling," Energies, MDPI, vol. 16(5), pages 1-17, February.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:5:p:2103-:d:1075980
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/5/2103/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/5/2103/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Qiqi Li & Shang Xu & Liang Zhang & Fengling Chen & Shiqiang Wu & Nan Bai, 2022. "Shale Oil Enrichment Mechanism of the Paleogene Xingouzui Formation, Jianghan Basin, China," Energies, MDPI, vol. 15(11), pages 1-18, May.
    2. Han, X.X. & Jiang, X.M. & Cui, Z.G., 2009. "Studies of the effect of retorting factors on the yield of shale oil for a new comprehensive utilization technology of oil shale," Applied Energy, Elsevier, vol. 86(11), pages 2381-2385, November.
    3. Song, Xianzhi & Zhang, Chengkai & Shi, Yu & Li, Gensheng, 2019. "Production performance of oil shale in-situ conversion with multilateral wells," Energy, Elsevier, vol. 189(C).
    4. Li, Xiuxi & Zhou, Huairong & Wang, Yajun & Qian, Yu & Yang, Siyu, 2015. "Thermoeconomic analysis of oil shale retorting processes with gas or solid heat carrier," Energy, Elsevier, vol. 87(C), pages 605-614.
    5. Wang, Guoying & Liu, Shaowei & Yang, Dong & Fu, Mengxiong, 2022. "Numerical study on the in-situ pyrolysis process of steeply dipping oil shale deposits by injecting superheated water steam: A case study on Jimsar oil shale in Xinjiang, China," Energy, Elsevier, vol. 239(PC).
    6. Al-Ayed, Omar S. & Matouq, M. & Anbar, Z. & Khaleel, Adnan M. & Abu-Nameh, Eyad, 2010. "Oil shale pyrolysis kinetics and variable activation energy principle," Applied Energy, Elsevier, vol. 87(4), pages 1269-1272, April.
    7. Xu, HengYu & Yu, Hao & Fan, JingCun & Xia, Jun & Liu, He & Wu, HengAn, 2022. "Formation mechanism and structural characteristic of pore-networks in shale kerogen during in-situ conversion process," Energy, Elsevier, vol. 242(C).
    8. Guoying Wang & Dong Yang & Zhiqin Kang & Jing Zhao, 2018. "Anisotropy in Thermal Recovery of Oil Shale—Part 1: Thermal Conductivity, Wave Velocity and Crack Propagation," Energies, MDPI, vol. 11(1), pages 1-15, January.
    9. Wang, Sha & Jiang, Xiumin & Han, Xiangxin & Tong, Jianhui, 2012. "Investigation of Chinese oil shale resources comprehensive utilization performance," Energy, Elsevier, vol. 42(1), pages 224-232.
    10. Xu, WenLong & Yu, Hao & Micheal, Marembo & Huang, HanWei & Liu, He & Wu, HengAn, 2023. "An integrated model for fracture propagation and production performance of thermal enhanced shale gas recovery," Energy, Elsevier, vol. 263(PA).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huang, HanWei & Yu, Hao & Xu, WenLong & Lyu, ChengSi & Micheal, Marembo & Xu, HengYu & Liu, He & Wu, HengAn, 2023. "A coupled thermo-hydro-mechanical-chemical model for production performance of oil shale reservoirs during in-situ conversion process," Energy, Elsevier, vol. 268(C).
    2. Kang, Zhiqin & Zhao, Yangsheng & Yang, Dong, 2020. "Review of oil shale in-situ conversion technology," Applied Energy, Elsevier, vol. 269(C).
    3. Shangli Liu & Haifeng Gai & Peng Cheng, 2023. "Technical Scheme and Application Prospects of Oil Shale In Situ Conversion: A Review of Current Status," Energies, MDPI, vol. 16(11), pages 1-22, May.
    4. Shi, Yu & Zhang, Yulong & Song, Xianzhi & Cui, Qiliang & Lei, Zhihong & Song, Guofeng, 2023. "Injection energy utilization efficiency and production performance of oil shale in-situ exploitation," Energy, Elsevier, vol. 263(PB).
    5. Yang, Qinchuan & Guo, Wei & Xu, Shaotao & Zhu, Chaofan, 2023. "The autothermic pyrolysis in-situ conversion process for oil shale recovery: Effect of gas injection parameters," Energy, Elsevier, vol. 283(C).
    6. Yang, Qingchun & Qian, Yu & Kraslawski, Andrzej & Zhou, Huairong & Yang, Siyu, 2016. "Advanced exergy analysis of an oil shale retorting process," Applied Energy, Elsevier, vol. 165(C), pages 405-415.
    7. Guo, Wei & Yang, Qinchuan & Deng, Sunhua & Li, Qiang & Sun, Youhong & Su, Jianzheng & Zhu, Chaofan, 2022. "Experimental study of the autothermic pyrolysis in-situ conversion process (ATS) for oil shale recovery," Energy, Elsevier, vol. 258(C).
    8. Wang, Lei & Yang, Dong & Zhang, Yuxing & Li, Wenqing & Kang, Zhiqin & Zhao, Yangsheng, 2022. "Research on the reaction mechanism and modification distance of oil shale during high-temperature water vapor pyrolysis," Energy, Elsevier, vol. 261(PB).
    9. Zhou, Huairong & Li, Hongwei & Duan, Runhao & Yang, Qingchun, 2020. "An integrated scheme of coal-assisted oil shale efficient pyrolysis and high-value conversion of pyrolysis oil," Energy, Elsevier, vol. 196(C).
    10. Wang, Guoying & Liu, Shaowei & Yang, Dong & Fu, Mengxiong, 2022. "Numerical study on the in-situ pyrolysis process of steeply dipping oil shale deposits by injecting superheated water steam: A case study on Jimsar oil shale in Xinjiang, China," Energy, Elsevier, vol. 239(PC).
    11. Han, Xiangxin & Niu, Mengting & Jiang, Xiumin, 2014. "Combined fluidized bed retorting and circulating fluidized bed combustion system of oil shale: 2. Energy and economic analysis," Energy, Elsevier, vol. 74(C), pages 788-794.
    12. Hao Wang & Xiaogang Li & Jingyi Zhu & Zhaozhong Yang & Jie Zhou & Liangping Yi, 2022. "Numerical Simulation of Oil Shale Pyrolysis under Microwave Irradiation Based on a Three-Dimensional Porous Medium Multiphysics Field Model," Energies, MDPI, vol. 15(9), pages 1-20, April.
    13. Juan Jin & Jiandong Liu & Weidong Jiang & Wei Cheng & Xiaowen Zhang, 2022. "Evolution of the Anisotropic Thermal Conductivity of Oil Shale with Temperature and Its Relationship with Anisotropic Pore Structure Evolution," Energies, MDPI, vol. 15(21), pages 1-16, October.
    14. Lu, Yang & Wang, Ying & Zhang, Jing & Wang, Qi & Zhao, Yuqiong & Zhang, Yongfa, 2020. "Investigation on the characteristics of pyrolysates during co-pyrolysis of Zhundong coal and Changji oil shale and its kinetics," Energy, Elsevier, vol. 200(C).
    15. Mu, Mao & Han, Xiangxin & Jiang, Xiumin, 2018. "Combined fluidized bed retorting and circulating fluidized bed combustion system of oil shale: 3. Exergy analysis," Energy, Elsevier, vol. 151(C), pages 930-939.
    16. Xu, WenLong & Yu, Hao & Micheal, Marembo & Huang, HanWei & Liu, He & Wu, HengAn, 2023. "An integrated model for fracture propagation and production performance of thermal enhanced shale gas recovery," Energy, Elsevier, vol. 263(PA).
    17. Sun, Youhong & Bai, Fengtian & Lü, Xiaoshu & Jia, Chunxia & Wang, Qing & Guo, Mingyi & Li, Qiang & Guo, Wei, 2015. "Kinetic study of Huadian oil shale combustion using a multi-stage parallel reaction model," Energy, Elsevier, vol. 82(C), pages 705-713.
    18. Zhang, Shuo & Song, Shengyuan & Zhang, Wen & Zhao, Jinmin & Cao, Dongfang & Ma, Wenliang & Chen, Zijian & Hu, Ying, 2023. "Research on the inherent mechanism of rock mass deformation of oil shale in-situ mining under the condition of thermal-fluid-solid coupling," Energy, Elsevier, vol. 280(C).
    19. Song, Xianzhi & Zhang, Chengkai & Shi, Yu & Li, Gensheng, 2019. "Production performance of oil shale in-situ conversion with multilateral wells," Energy, Elsevier, vol. 189(C).
    20. Li, Bo & Yu, Hao & Xu, WenLong & Huang, HanWei & Huang, MengCheng & Meng, SiWei & Liu, He & Wu, HengAn, 2023. "A multi-physics coupled multi-scale transport model for CO2 sequestration and enhanced recovery in shale formation with fractal fracture networks," Energy, Elsevier, vol. 284(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:5:p:2103-:d:1075980. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.