IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v283y2023ics0360544223025288.html
   My bibliography  Save this article

The autothermic pyrolysis in-situ conversion process for oil shale recovery: Effect of gas injection parameters

Author

Listed:
  • Yang, Qinchuan
  • Guo, Wei
  • Xu, Shaotao
  • Zhu, Chaofan

Abstract

The scale benefit exploitation of oil shale is of great significance to alleviate the current world energy shortage. The autothermic pyrolysis in-situ conversion process (ATS) method shows the feasibility and broad prospects of in-situ efficient utilization of oil shale resources (Guo et al., 2022) [29]. This study conducts in-situ pyrolysis of oil shale by ATS method with oxygen content and injection gas flow as experimental parameters, further clarifying the energy efficiency mechanism and influence characteristics of oxygen injection amount on the in-situ autothermic pyrolysis. The results showed that the in-situ self-pyrolysis reaction can be successfully triggered at 300 °C under the injection parameters of 12,16,21% oxygen content and 3,5,7 L/min injection gas flow rate. However, neither too low nor too high oxygen injection amount can achieve a good in-situ conversion effect. Within the range of parameters considered in this study, the optimal combination of oxygen injection parameters for in-situ pyrolysis of oil shale by the ATS method is 16% oxygen content and 5 L/min injection gas flow. The recovery rate of its cracked oil is 67.1%, and its energy efficiency is as high as 3.46, which is 6.78 times the energy efficiency of in-situ high-temperature nitrogen pyrolysis, realizing the benefits of the transformation of oil shale resources. Meanwhile, according to the apparent optical characteristics of the sample after the experiment and the evolution of the material components in each reaction region, the in-situ autothermic pyrolysis has a significant regional fingering feature. It is hoped that this study will provide reliable data support for the large-scale application of the ATS method.

Suggested Citation

  • Yang, Qinchuan & Guo, Wei & Xu, Shaotao & Zhu, Chaofan, 2023. "The autothermic pyrolysis in-situ conversion process for oil shale recovery: Effect of gas injection parameters," Energy, Elsevier, vol. 283(C).
    • Handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223025288
    DOI: 10.1016/j.energy.2023.129134
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223025288
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129134?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Song, Xianzhi & Zhang, Chengkai & Shi, Yu & Li, Gensheng, 2019. "Production performance of oil shale in-situ conversion with multilateral wells," Energy, Elsevier, vol. 189(C).
    2. Li, Xiuxi & Zhou, Huairong & Wang, Yajun & Qian, Yu & Yang, Siyu, 2015. "Thermoeconomic analysis of oil shale retorting processes with gas or solid heat carrier," Energy, Elsevier, vol. 87(C), pages 605-614.
    3. Shuai Zhao & Qiang Li & Xiaoshu Lü & Youhong Sun, 2021. "Productivity Analysis of Fuyu Oil Shale In-Situ Pyrolysis by Injecting Hot Nitrogen," Energies, MDPI, vol. 14(16), pages 1-16, August.
    4. Guo, Wei & Yang, Qinchuan & Deng, Sunhua & Li, Qiang & Sun, Youhong & Su, Jianzheng & Zhu, Chaofan, 2022. "Experimental study of the autothermic pyrolysis in-situ conversion process (ATS) for oil shale recovery," Energy, Elsevier, vol. 258(C).
    5. Xu, HengYu & Yu, Hao & Fan, JingCun & Xia, Jun & Liu, He & Wu, HengAn, 2022. "Formation mechanism and structural characteristic of pore-networks in shale kerogen during in-situ conversion process," Energy, Elsevier, vol. 242(C).
    6. Kang, Zhiqin & Zhao, Yangsheng & Yang, Dong, 2020. "Review of oil shale in-situ conversion technology," Applied Energy, Elsevier, vol. 269(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huang, HanWei & Yu, Hao & Xu, WenLong & Lyu, ChengSi & Micheal, Marembo & Xu, HengYu & Liu, He & Wu, HengAn, 2023. "A coupled thermo-hydro-mechanical-chemical model for production performance of oil shale reservoirs during in-situ conversion process," Energy, Elsevier, vol. 268(C).
    2. Shangli Liu & Haifeng Gai & Peng Cheng, 2023. "Technical Scheme and Application Prospects of Oil Shale In Situ Conversion: A Review of Current Status," Energies, MDPI, vol. 16(11), pages 1-22, May.
    3. Juan Jin & Weidong Jiang & Jiandong Liu & Junfeng Shi & Xiaowen Zhang & Wei Cheng & Ziniu Yu & Weixi Chen & Tingfu Ye, 2023. "Numerical Analysis of In Situ Conversion Process of Oil Shale Formation Based on Thermo-Hydro-Chemical Coupled Modelling," Energies, MDPI, vol. 16(5), pages 1-17, February.
    4. Dazhong Ren & Zhendong Wang & Fu Yang & Hao Zeng & Chenyuan Lü & Han Wang & Senhao Wang & Shaotao Xu, 2024. "Study on the Applicability of Autothermic Pyrolysis In Situ Conversion Process for Low-Grade Oil Shale: A Case Study of Tongchuan, Ordos Basin, China," Energies, MDPI, vol. 17(13), pages 1-21, June.
    5. Wang, Guoying & Liu, Shaowei & Yang, Dong & Fu, Mengxiong, 2022. "Numerical study on the in-situ pyrolysis process of steeply dipping oil shale deposits by injecting superheated water steam: A case study on Jimsar oil shale in Xinjiang, China," Energy, Elsevier, vol. 239(PC).
    6. Shi, Yu & Zhang, Yulong & Song, Xianzhi & Cui, Qiliang & Lei, Zhihong & Song, Guofeng, 2023. "Injection energy utilization efficiency and production performance of oil shale in-situ exploitation," Energy, Elsevier, vol. 263(PB).
    7. Nie, Bin, 2023. "Study on thermal decomposition of oil shale: Two-phase fluid simulation in wellbore," Energy, Elsevier, vol. 272(C).
    8. Zhang, Xu & Guo, Wei & Pan, Junfan & Zhu, Chaofan & Deng, Sunhua, 2024. "In-situ pyrolysis of oil shale in pressured semi-closed system: Insights into products characteristics and pyrolysis mechanism," Energy, Elsevier, vol. 286(C).
    9. Hao Wang & Xiaogang Li & Jingyi Zhu & Zhaozhong Yang & Jie Zhou & Liangping Yi, 2022. "Numerical Simulation of Oil Shale Pyrolysis under Microwave Irradiation Based on a Three-Dimensional Porous Medium Multiphysics Field Model," Energies, MDPI, vol. 15(9), pages 1-20, April.
    10. Kang, Shijie & Zhang, Shijing & Wang, Zhendong & Li, Shengli & Zhao, Fangci & Yang, Jie & Zhou, Lingbo & Deng, Yang & Sun, Guidong & Yu, Hongdong, 2023. "Highly efficient catalytic pyrolysis of oil shale by CaCl2 in subcritical water," Energy, Elsevier, vol. 274(C).
    11. Xu, Shaotao & Sun, Youhong & Yang, Qinchuan & Wang, Han & Kang, Shijie & Guo, Wei & Shan, Xuanlong & He, Wentong, 2023. "Product migration and regional reaction characteristics in the autothermic pyrolysis in-situ conversion process of low-permeability Huadian oil shale core," Energy, Elsevier, vol. 283(C).
    12. Guo, Wei & Fan, Cunhan & Liu, Zhao & Zhang, Xu & Sun, Youhong & Li, Qiang, 2024. "Fates of pyrolysis oil components in the non-isothermal propped fractures during oil shale in situ pyrolysis exploitation," Energy, Elsevier, vol. 288(C).
    13. Guo, Wei & Zhang, Xu & Sun, Youhong & Li, Qiang & Liu, Zhao, 2023. "Migration mechanism of pyrolysis oil during oil shale in situ pyrolysis exploitation," Energy, Elsevier, vol. 285(C).
    14. Xu, HengYu & Yu, Hao & Fan, JingCun & Xia, Jun & Liu, He & Wu, HengAn, 2022. "Formation mechanism and structural characteristic of pore-networks in shale kerogen during in-situ conversion process," Energy, Elsevier, vol. 242(C).
    15. Guo, Wei & Yang, Qinchuan & Deng, Sunhua & Li, Qiang & Sun, Youhong & Su, Jianzheng & Zhu, Chaofan, 2022. "Experimental study of the autothermic pyrolysis in-situ conversion process (ATS) for oil shale recovery," Energy, Elsevier, vol. 258(C).
    16. Hao Wang & Jianzheng Su & Jingyi Zhu & Zhaozhong Yang & Xianglong Meng & Xiaogang Li & Jie Zhou & Liangping Yi, 2022. "Numerical Simulation of Oil Shale Retorting Optimization under In Situ Microwave Heating Considering Electromagnetics, Heat Transfer, and Chemical Reactions Coupling," Energies, MDPI, vol. 15(16), pages 1-14, August.
    17. Sergei Sabanov & Abdullah Rasheed Qureshi & Zhaudir Dauitbay & Gulim Kurmangazy, 2023. "A Method for the Modified Estimation of Oil Shale Mineable Reserves for Shale Oil Projects: A Case Study," Energies, MDPI, vol. 16(16), pages 1-17, August.
    18. Pan, Xuwei & Wu, Yan & Li, Tingzhen & Lan, Guoxin & Shen, Jia & Yu, Yue & Xue, Ping & Chen, Dan & Wang, Maoqing & Fu, Chuan, 2023. "A study of co-pyrolysis of sewage sludge and rice husk for syngas production based on a cyclic catalytic integrated process system," Renewable Energy, Elsevier, vol. 215(C).
    19. Zhang, Shuo & Song, Shengyuan & Zhang, Wen & Zhao, Jinmin & Cao, Dongfang & Ma, Wenliang & Chen, Zijian & Hu, Ying, 2023. "Research on the inherent mechanism of rock mass deformation of oil shale in-situ mining under the condition of thermal-fluid-solid coupling," Energy, Elsevier, vol. 280(C).
    20. Yiwei Wang & Yuan Wang & Sunhua Deng & Qiang Li & Jingjing Gu & Haoche Shui & Wei Guo, 2022. "Numerical Simulation Analysis of Heating Effect of Downhole Methane Catalytic Combustion Heater under High Pressure," Energies, MDPI, vol. 15(3), pages 1-23, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223025288. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.