IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i2p389-d308204.html
   My bibliography  Save this article

Online Bearing Clearance Monitoring Based on an Accurate Vibration Analysis

Author

Listed:
  • Jianguo Wang

    (School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China)

  • Minmin Xu

    (State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China
    Centre for Efficiency and Performance Engineering, University of Huddersfield, Huddersfield HD1 3DH, UK)

  • Chao Zhang

    (School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China)

  • Baoshan Huang

    (School of Industrial Automation, Beijing Institute of Technology, Zhuhai 519088, China)

  • Fengshou Gu

    (Centre for Efficiency and Performance Engineering, University of Huddersfield, Huddersfield HD1 3DH, UK
    School of Industrial Automation, Beijing Institute of Technology, Zhuhai 519088, China)

Abstract

Accurate diagnosis of incipient faults in wind turbine (WT) assets will provide sufficient lead time to apply an optimal maintenance for the expensive WT assets which often are located in a remote and harsh environment and their maintenance usually needs heavy equipment and highly skilled engineers. This paper presents an online bearing clearance monitoring approach to diagnose the change of bearing clearance, providing an early and interpretable indication of bearing health conditions. A novel dynamic load distribution method is developed to efficiently gain the general characteristics of vibration response of bearings without local defects but with small geometric errors. It shows that the ball pass frequency of outer race (BPFO) is the primary exciting source due to biased load distribution relating to bearing clearance. The geometric errors, including various orders of runouts on different bearing parts, can be the secondary excitation source. Both sources lead to compound modulation responses with very low amplitudes, being more than 20 dB lower than that of a small local defect on raceways and often buried by background noise. Then, Modulation Signal Bispectrum (MSB) is identified to purify the noisy signal and Gini index is introduced to represent the peakness of MSB results, thereby an interpretable indicator bounded between 0 and 1 is established to show bearing clearance status. Datasets from both a dedicated bearing test and a run-to-failure gearbox test are employed to verify the performance and reliability of the proposed approach. Results show that the proposed method is capable to indicate a change of about 20 µm in bearing clearance online, which provides a significantly long lead time compared to the diagnosis method that focuses only on local defects. Therefore, this method provides a big opportunity to implement more cost-effective maintenance works or carry out timely remedial actions to prolong the lifespan of bearings. Obviously, it is applicable to not only WT assets, but also most rotating machines.

Suggested Citation

  • Jianguo Wang & Minmin Xu & Chao Zhang & Baoshan Huang & Fengshou Gu, 2020. "Online Bearing Clearance Monitoring Based on an Accurate Vibration Analysis," Energies, MDPI, vol. 13(2), pages 1-17, January.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:2:p:389-:d:308204
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/2/389/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/2/389/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wang, Jinjiang & Liang, Yuanyuan & Zheng, Yinghao & Gao, Robert X. & Zhang, Fengli, 2020. "An integrated fault diagnosis and prognosis approach for predictive maintenance of wind turbine bearing with limited samples," Renewable Energy, Elsevier, vol. 145(C), pages 642-650.
    2. Baoshan Huang & Guojin Feng & Xiaoli Tang & James Xi Gu & Guanghua Xu & Robert Cattley & Fengshou Gu & Andrew D. Ball, 2019. "A Performance Evaluation of Two Bispectrum Analysis Methods Applied to Electrical Current Signals for Monitoring Induction Motor-Driven Systems," Energies, MDPI, vol. 12(8), pages 1-23, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Akilu Yunusa-Kaltungo & Ruifeng Cao, 2020. "Towards Developing an Automated Faults Characterisation Framework for Rotating Machines. Part 1: Rotor-Related Faults," Energies, MDPI, vol. 13(6), pages 1-20, March.
    2. Xiaohua Song & Jing Liu & Chaobo Chen & Song Gao, 2022. "Advanced Methods in Rotating Machines," Energies, MDPI, vol. 15(15), pages 1-3, July.
    3. Chao Zhang & Haoran Duan & Yu Xue & Biao Zhang & Bin Fan & Jianguo Wang & Fengshou Gu, 2020. "The Enhancement of Weak Bearing Fault Signatures by Stochastic Resonance with a Novel Potential Function," Energies, MDPI, vol. 13(23), pages 1-15, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xu, Xuefang & Li, Bo & Qiao, Zijian & Shi, Peiming & Shao, Huaishuang & Li, Ruixiong, 2023. "Caputo-Fabrizio fractional order derivative stochastic resonance enhanced by ADOF and its application in fault diagnosis of wind turbine drivetrain," Renewable Energy, Elsevier, vol. 219(P1).
    2. Merainani, Boualem & Laddada, Sofiane & Bechhoefer, Eric & Chikh, Mohamed Abdessamed Ait & Benazzouz, Djamel, 2022. "An integrated methodology for estimating the remaining useful life of high-speed wind turbine shaft bearings with limited samples," Renewable Energy, Elsevier, vol. 182(C), pages 1141-1151.
    3. Ahmed, Umair & Carpitella, Silvia & Certa, Antonella, 2021. "An integrated methodological approach for optimising complex systems subjected to predictive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    4. Carlos Candelo-Zuluaga & Jordi-Roger Riba & Carlos López-Torres & Antoni Garcia, 2019. "Detection of Inter-Turn Faults in Multi-Phase Ferrite-PM Assisted Synchronous Reluctance Machines," Energies, MDPI, vol. 12(14), pages 1-15, July.
    5. Abdullah Caliskan & Conor O’Brien & Krishna Panduru & Joseph Walsh & Daniel Riordan, 2023. "An Efficient Siamese Network and Transfer Learning-Based Predictive Maintenance System for More Sustainable Manufacturing," Sustainability, MDPI, vol. 15(12), pages 1-23, June.
    6. Mucchielli, P. & Bhowmik, B. & Ghosh, B. & Pakrashi, V., 2021. "Real-time accurate detection of wind turbine downtime - An Irish perspective," Renewable Energy, Elsevier, vol. 179(C), pages 1969-1989.
    7. Zemali, Zakaria & Cherroun, Lakhmissi & Hadroug, Nadji & Hafaifa, Ahmed & Iratni, Abdelhamid & Alshammari, Obaid S. & Colak, Ilhami, 2023. "Robust intelligent fault diagnosis strategy using Kalman observers and neuro-fuzzy systems for a wind turbine benchmark," Renewable Energy, Elsevier, vol. 205(C), pages 873-898.
    8. Toubeau, Jean-François & Pardoen, Lorie & Hubert, Louis & Marenne, Nicolas & Sprooten, Jonathan & De Grève, Zacharie & Vallée, François, 2022. "Machine learning-assisted outage planning for maintenance activities in power systems with renewables," Energy, Elsevier, vol. 238(PC).
    9. Jordi Burriel-Valencia & Ruben Puche-Panadero & Javier Martinez-Roman & Angel Sapena-Baño & Martin Riera-Guasp & Manuel Pineda-Sánchez, 2019. "Multi-Band Frequency Window for Time-Frequency Fault Diagnosis of Induction Machines," Energies, MDPI, vol. 12(17), pages 1-18, August.
    10. Wojciech Pietrowski & Konrad Górny, 2020. "Analysis of Torque Ripples of an Induction Motor Taking into Account a Inter-Turn Short-Circuit in a Stator Winding," Energies, MDPI, vol. 13(14), pages 1-19, July.
    11. Maryna Garan & Khaoula Tidriri & Iaroslav Kovalenko, 2022. "A Data-Centric Machine Learning Methodology: Application on Predictive Maintenance of Wind Turbines," Energies, MDPI, vol. 15(3), pages 1-21, January.
    12. Pan, Yubin & Hong, Rongjing & Chen, Jie & Wu, Weiwei, 2020. "A hybrid DBN-SOM-PF-based prognostic approach of remaining useful life for wind turbine gearbox," Renewable Energy, Elsevier, vol. 152(C), pages 138-154.
    13. Krzysztof Lalik & Filip Wątorek, 2021. "Predictive Maintenance Neural Control Algorithm for Defect Detection of the Power Plants Rotating Machines Using Augmented Reality Goggles," Energies, MDPI, vol. 14(22), pages 1-18, November.
    14. Ravi Kumar Pandit & Davide Astolfi & Isidro Durazo Cardenas, 2023. "A Review of Predictive Techniques Used to Support Decision Making for Maintenance Operations of Wind Turbines," Energies, MDPI, vol. 16(4), pages 1-17, February.
    15. de Oliveira Nogueira, Tiago & Palacio, Gilderlânio Barbosa Alves & Braga, Fabrício Damasceno & Maia, Pedro Paulo Nunes & de Moura, Elineudo Pinho & de Andrade, Carla Freitas & Rocha, Paulo Alexandre C, 2022. "Imbalance classification in a scaled-down wind turbine using radial basis function kernel and support vector machines," Energy, Elsevier, vol. 238(PC).
    16. Junshuai Yan & Yongqian Liu & Xiaoying Ren & Li Li, 2023. "Wind Turbine Gearbox Condition Monitoring Using Hybrid Attentions and Spatio-Temporal BiConvLSTM Network," Energies, MDPI, vol. 16(19), pages 1-22, September.
    17. Liu, Dongdong & Cui, Lingli & Cheng, Weidong, 2023. "Fault diagnosis of wind turbines under nonstationary conditions based on a novel tacho-less generalized demodulation," Renewable Energy, Elsevier, vol. 206(C), pages 645-657.
    18. Zheng Wang & Peng Gao & Xuening Chu, 2022. "Remaining Useful Life Prediction of Wind Turbine Gearbox Bearings with Limited Samples Based on Prior Knowledge and PI-LSTM," Sustainability, MDPI, vol. 14(19), pages 1-22, September.
    19. Gang Li & Weidong Zhu, 2022. "A Review on Up-to-Date Gearbox Technologies and Maintenance of Tidal Current Energy Converters," Energies, MDPI, vol. 15(23), pages 1-24, December.
    20. Sotiris P. Gayialis & Evripidis P. Kechagias & Grigorios D. Konstantakopoulos & Georgios A. Papadopoulos, 2022. "A Predictive Maintenance System for Reverse Supply Chain Operations," Logistics, MDPI, vol. 6(1), pages 1-14, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:2:p:389-:d:308204. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.