IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i24p4774-d298024.html
   My bibliography  Save this article

Design of Partial Discharge Test Environment for Oil-Filled Submarine Cable Terminals and Ultrasonic Monitoring

Author

Listed:
  • Yulong Wang

    (Key Laboratory of Engineering Dielectrics and its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China
    College of Rongcheng, Harbin University of Science and Technology, Rongcheng 264300, China)

  • Xiaohong Zhang

    (Key Laboratory of Engineering Dielectrics and its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China)

  • Lili Li

    (Key Laboratory of Engineering Dielectrics and its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China
    College of Rongcheng, Harbin University of Science and Technology, Rongcheng 264300, China)

  • Jinyang Du

    (Key Laboratory of Engineering Dielectrics and its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China)

  • Junguo Gao

    (Key Laboratory of Engineering Dielectrics and its Application, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China)

Abstract

Based on the principle of operating an oil-filled-cable operation and the explanation of the oil-filling process provided in the cable operation and maintenance manual of submarine cables, this study investigated oil-pressure variation caused by gas generated as a result of cable faults. First, a set of oil-filled cables and their terminal oil-filled simulation system were designed in the laboratory, and a typical oil-filled-cable fault model was established according to the common faults of oil-filled cables observed in practice. Thereafter, ultrasonic signals of partial discharge (PD) under different fault models were obtained via validation experiments, which were performed by using oil-filled-cable simulation equipment. Subsequently, the ultrasonic signal mechanism was analyzed; these signals were generated via electric, thermal, and acoustic expansion and contraction, along with electric, mechanical, and acoustic electrostriction. Finally, upon processing the 400 experimental data groups, four practical parameters—maximum amplitude of the ultrasonic signal spectrum, D max , maximum frequency of the ultrasonic signals, f max , average ultrasonic signal energy, D av , and the ultrasonic signal amplitude coefficient, M—were designed to characterize the ultrasonic signals. These parameters can be used for subsequent pattern recognition. Thus, in this study, the terminal PD of an oil-filled marine cable was monitored.

Suggested Citation

  • Yulong Wang & Xiaohong Zhang & Lili Li & Jinyang Du & Junguo Gao, 2019. "Design of Partial Discharge Test Environment for Oil-Filled Submarine Cable Terminals and Ultrasonic Monitoring," Energies, MDPI, vol. 12(24), pages 1-14, December.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:24:p:4774-:d:298024
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/24/4774/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/24/4774/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Stefan Tenbohlen & Sebastian Coenen & Mohammad Djamali & Andreas Müller & Mohammad Hamed Samimi & Martin Siegel, 2016. "Diagnostic Measurements for Power Transformers," Energies, MDPI, vol. 9(5), pages 1-25, May.
    2. Arthur F. Andrade & Edson G. Costa & Filipe L.M. Andrade & Clarice S.H. Soares & George R.S. Lira, 2019. "Design of Cable Termination for AC Breakdown Voltage Tests," Energies, MDPI, vol. 12(16), pages 1-14, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Szymon Banaszak & Konstanty Marek Gawrylczyk & Katarzyna Trela, 2020. "Frequency Response Modelling of Transformer Windings Connected in Parallel," Energies, MDPI, vol. 13(6), pages 1-13, March.
    2. Patryk Bohatyrewicz & Szymon Banaszak, 2022. "Assessment Criteria of Changes in Health Index Values over Time—A Transformer Population Study," Energies, MDPI, vol. 15(16), pages 1-15, August.
    3. Alexandra I. Khalyasmaa & Pavel V. Matrenin & Stanislav A. Eroshenko & Vadim Z. Manusov & Andrey M. Bramm & Alexey M. Romanov, 2022. "Data Mining Applied to Decision Support Systems for Power Transformers’ Health Diagnostics," Mathematics, MDPI, vol. 10(14), pages 1-25, July.
    4. Mehran Tahir & Stefan Tenbohlen, 2021. "Transformer Winding Condition Assessment Using Feedforward Artificial Neural Network and Frequency Response Measurements," Energies, MDPI, vol. 14(11), pages 1-25, May.
    5. Álvaro Jaramillo-Duque & Nicolás Muñoz-Galeano & José R. Ortiz-Castrillón & Jesús M. López-Lezama & Ricardo Albarracín-Sánchez, 2018. "Power Loss Minimization for Transformers Connected in Parallel with Taps Based on Power Chargeability Balance," Energies, MDPI, vol. 11(2), pages 1-12, February.
    6. Christian Gianoglio & Edoardo Ragusa & Paolo Gastaldo & Federico Gallesi & Francesco Guastavino, 2021. "Online Predictive Maintenance Monitoring Adopting Convolutional Neural Networks," Energies, MDPI, vol. 14(15), pages 1-23, August.
    7. Szymon Banaszak & Eugeniusz Kornatowski & Wojciech Szoka, 2021. "The Influence of the Window Width on FRA Assessment with Numerical Indices," Energies, MDPI, vol. 14(2), pages 1-18, January.
    8. Nuria Novas & Alfredo Alcayde & Isabel Robalo & Francisco Manzano-Agugliaro & Francisco G. Montoya, 2020. "Energies and Its Worldwide Research," Energies, MDPI, vol. 13(24), pages 1-41, December.
    9. Pedro J. Villegas & Juan A. Martín-Ramos & Juan Díaz & Juan Á. Martínez & Miguel J. Prieto & Alberto M. Pernía, 2017. "A Digitally Controlled Power Converter for an Electrostatic Precipitator," Energies, MDPI, vol. 10(12), pages 1-24, December.
    10. Christian Gianoglio & Edoardo Ragusa & Andrea Bruzzone & Paolo Gastaldo & Rodolfo Zunino & Francesco Guastavino, 2020. "Unsupervised Monitoring System for Predictive Maintenance of High Voltage Apparatus," Energies, MDPI, vol. 13(5), pages 1-16, March.
    11. Jing Wu & Kun Li & Jing Sun & Li Xie, 2018. "A Novel Integrated Method to Diagnose Faults in Power Transformers," Energies, MDPI, vol. 11(11), pages 1-8, November.
    12. Qing Yang & Peiyu Su & Yong Chen, 2017. "Comparison of Impulse Wave and Sweep Frequency Response Analysis Methods for Diagnosis of Transformer Winding Faults," Energies, MDPI, vol. 10(4), pages 1-16, March.
    13. Lei Peng & Qiang Fu & Yaohong Zhao & Yihua Qian & Tiansheng Chen & Shengping Fan, 2018. "A Non-Destructive Optical Method for the DP Measurement of Paper Insulation Based on the Free Fibers in Transformer Oil," Energies, MDPI, vol. 11(4), pages 1-9, March.
    14. Javier Leiva & Rubén Carmona Pardo & José A. Aguado, 2019. "Data Analytics-Based Multi-Objective Particle Swarm Optimization for Determination of Congestion Thresholds in LV Networks," Energies, MDPI, vol. 12(7), pages 1-20, April.
    15. Regelii Suassuna de Andrade Ferreira & Patrick Picher & Hassan Ezzaidi & Issouf Fofana, 2021. "A Machine-Learning Approach to Identify the Influence of Temperature on FRA Measurements," Energies, MDPI, vol. 14(18), pages 1-14, September.
    16. Michał Kunicki & Sebastian Borucki & Andrzej Cichoń & Jerzy Frymus, 2019. "Modeling of the Winding Hot-Spot Temperature in Power Transformers: Case Study of the Low-Loaded Fleet," Energies, MDPI, vol. 12(18), pages 1-17, September.
    17. Piotr Przybylek & Hubert Moranda & Hanna Moscicka-Grzesiak & Dominika Szczesniak, 2019. "Application of Synthetic Ester for Drying Distribution Transformer Insulation—The Influence of Cellulose Thickness on Drying Efficiency," Energies, MDPI, vol. 12(20), pages 1-16, October.
    18. Eugeniusz Kornatowski & Szymon Banaszak, 2019. "Frequency Response Quality Index for Assessing the Mechanical Condition of Transformer Windings," Energies, MDPI, vol. 13(1), pages 1-15, December.
    19. Alhaytham Alqudsi & Ayman El-Hag, 2019. "Application of Machine Learning in Transformer Health Index Prediction," Energies, MDPI, vol. 12(14), pages 1-13, July.
    20. Mehran Tahir & Stefan Tenbohlen, 2019. "A Comprehensive Analysis of Windings Electrical and Mechanical Faults Using a High-Frequency Model," Energies, MDPI, vol. 13(1), pages 1-25, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:24:p:4774-:d:298024. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.