IDEAS home Printed from https://ideas.repec.org/a/gam/jagris/v12y2022i7p987-d858913.html
   My bibliography  Save this article

Experimental Study on Droplet Characteristics of Rotating Sprinklers with Circular Nozzles and Diffuser

Author

Listed:
  • Jian Wang

    (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212000, China)

  • Zhuoyang Song

    (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212000, China)

  • Rui Chen

    (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212000, China)

  • Ting Yang

    (New Huaishu River Administration Office of Jiangsu Province, Huai’an 223005, China)

  • Zuokun Tian

    (Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212000, China)

Abstract

The characteristics of spray droplets are important for calculating the hydraulic performance of sprinklers. In order to evaluate the effects of working pressure and nozzle diameter on the near ground droplet characteristics of the Nelson R33 sprinkler, an experiment was conducted to test the droplet size and velocity by using a two-dimensional video disdrometer (2DVD). Based on the water application rate, droplet diameter and velocity, the kinetic energy was calculated. The results show that there is an exponential positive correlation between the range and the volume-weighted mean particle size of droplets (VMD). The average kinetic energy of a single droplet fits well with the power function model. Under the minimum pressure of 200 kPa, the diameter and kinetic energy of droplets are large, and the peak values are 5.67 mm and 0.0092 J, which are 1.14 to 1.62 times and 1.18 to 5.68 times those of other working conditions, respectively. When the nozzle diameter is the smallest (4.4 mm), the droplet diameter and peak kinetic energy are 1.12 to 1.58 times and 1.02 to 1.26 times higher than 4.8 and 5.2 mm. Therefore, it is not recommended to work under the condition of less than 250 kPa, and a small-diameter nozzle should be selected while ensuring uniform kinetic energy.

Suggested Citation

  • Jian Wang & Zhuoyang Song & Rui Chen & Ting Yang & Zuokun Tian, 2022. "Experimental Study on Droplet Characteristics of Rotating Sprinklers with Circular Nozzles and Diffuser," Agriculture, MDPI, vol. 12(7), pages 1-21, July.
    • Handle: RePEc:gam:jagris:v:12:y:2022:i:7:p:987-:d:858913
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2077-0472/12/7/987/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2077-0472/12/7/987/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Li, Jiusheng, 1998. "Modeling crop yield as affected by uniformity of sprinkler irrigation system," Agricultural Water Management, Elsevier, vol. 38(2), pages 135-146, December.
    2. Playan, E. & Zapata, N. & Faci, J.M. & Tolosa, D. & Lacueva, J.L. & Pelegrin, J. & Salvador, R. & Sanchez, I. & Lafita, A., 2006. "Assessing sprinkler irrigation uniformity using a ballistic simulation model," Agricultural Water Management, Elsevier, vol. 84(1-2), pages 89-100, July.
    3. Zapata, N. & Robles, O. & Playán, E. & Paniagua, P. & Romano, C. & Salvador, R. & Montoya, F., 2018. "Low-pressure sprinkler irrigation in maize: Differences in water distribution above and below the crop canopy," Agricultural Water Management, Elsevier, vol. 203(C), pages 353-365.
    4. Ge, Maosheng & Wu, Pute & Zhu, Delan & Zhang, Lin, 2020. "Comparisons of spray characteristics between vertical impact and turbine drive sprinklers—A case study of the 50PYC and HY50 big gun-type sprinklers," Agricultural Water Management, Elsevier, vol. 228(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Maroufpoor, Saman & Shiri, Jalal & Maroufpoor, Eisa, 2019. "Modeling the sprinkler water distribution uniformity by data-driven methods based on effective variables," Agricultural Water Management, Elsevier, vol. 215(C), pages 63-73.
    2. Hui, Xin & Zheng, Yudong & Yan, Haijun, 2021. "Water distributions of low-pressure sprinklers as affected by the maize canopy under a centre pivot irrigation system," Agricultural Water Management, Elsevier, vol. 245(C).
    3. Sanchez, I. & Zapata, N. & Faci, J.M., 2010. "Combined effect of technical, meteorological and agronomical factors on solid-set sprinkler irrigation: I. Irrigation performance and soil water recharge in alfalfa and maize," Agricultural Water Management, Elsevier, vol. 97(10), pages 1571-1581, October.
    4. Zapata, N. & Playan, E. & Martinez-Cob, A. & Sanchez, I. & Faci, J.M. & Lecina, S., 2007. "From on-farm solid-set sprinkler irrigation design to collective irrigation network design in windy areas," Agricultural Water Management, Elsevier, vol. 87(2), pages 187-199, January.
    5. Robles, O. & Latorre, B. & Zapata, N. & Burguete, J., 2019. "Self-calibrated ballistic model for sprinkler irrigation with a field experiments data base," Agricultural Water Management, Elsevier, vol. 223(C), pages 1-1.
    6. Pan Tang & Chao Chen & Hong Li, 2020. "Improving Water Distribution Uniformity by Optimizing the Structural Size of the Drive Spoon Blades for a Vertical Impact Sprinkler," Sustainability, MDPI, vol. 12(18), pages 1-13, September.
    7. Zhao, Weixia & Li, Jiusheng & Li, Yanfeng & Yin, Jianfeng, 2012. "Effects of drip system uniformity on yield and quality of Chinese cabbage heads," Agricultural Water Management, Elsevier, vol. 110(C), pages 118-128.
    8. Yang, Gaiqiang & Guo, Ping & Huo, Lijuan & Ren, Chongfeng, 2015. "Optimization of the irrigation water resources for Shijin irrigation district in north China," Agricultural Water Management, Elsevier, vol. 158(C), pages 82-98.
    9. Li, Jiusheng & Rao, Minjie, 2003. "Field evaluation of crop yield as affected by nonuniformity of sprinkler-applied water and fertilizers," Agricultural Water Management, Elsevier, vol. 59(1), pages 1-13, March.
    10. Iñigo Barberena & Miguel Ángel Campo-Bescós & Javier Casalí, 2022. "Extended Assessment of Sprinkler Irrigation Uniformity in Greenhouses Using GIS and Hydraulic Modeling," Sustainability, MDPI, vol. 14(15), pages 1-12, August.
    11. Li, Wenlong & Li, Zizhen & Li, Weide, 2004. "Effect of the niche-fitness at different water supply and fertilization on yield of spring wheat in farmland of semi-arid areas," Agricultural Water Management, Elsevier, vol. 67(1), pages 1-13, June.
    12. Xian Liu & Yueyue Xu & Shikun Sun & Xining Zhao & Yubao Wang, 2022. "Analysis of the Coupling Characteristics of Water Resources and Food Security: The Case of Northwest China," Agriculture, MDPI, vol. 12(8), pages 1-19, July.
    13. Zhang, Rui & Zheng, Changjuan & Zhu, Delan & Wu, Pute & Liu, Yichuan & Zhang, Xiaomin & Khudayberdi, Nazarov & Liu, Changxin, 2023. "Variation in sprinkler irrigation droplet impact angle on the physical crusting properties of soils," Agricultural Water Management, Elsevier, vol. 289(C).
    14. Zhang, Qianwen & Ge, Maosheng & Wu, Pute & Wei, Fuqiang & Xue, Shaopeng & Wang, Bo & Ge, Xinbo, 2023. "Solar photovoltaic coupled with compressed air energy storage: A novel method for energy saving and high quality sprinkler irrigation," Agricultural Water Management, Elsevier, vol. 288(C).
    15. Sanchez, I. & Zapata, N. & Faci, J.M., 2010. "Combined effect of technical, meteorological and agronomical factors on solid-set sprinkler irrigation: II. Modifications of the wind velocity and of the water interception plane by the crop canopy," Agricultural Water Management, Elsevier, vol. 97(10), pages 1591-1601, October.
    16. Ouazaa, S. & Latorre, B. & Burguete, J. & Zapata, N., 2016. "Effect of intra-irrigation meteorological variability on seasonal center-pivot irrigation performance and corn yield," Agricultural Water Management, Elsevier, vol. 177(C), pages 201-214.
    17. Davies, Michael J. & Harrison-Murray, Richard & Atkinson, Christopher J. & Grant, Olga M., 2016. "Application of deficit irrigation to container-grown hardy ornamental nursery stock via overhead irrigation, compared to drip irrigation," Agricultural Water Management, Elsevier, vol. 163(C), pages 244-254.
    18. Ján Jobbágy & Koloman Krištof, 2018. "Evaluation of the coefficient of uniformity and non-uniformity of irrigation for wide-range irrigators in various field conditions," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 64(2), pages 55-62.
    19. Eisa Maroufpoor & Arsalan Faryabi & Houshang Ghamarnia & Goran Yamin Moshrefi, 2010. "Evaluation of uniformity coefficients for sprinkler irrigation systems under different field conditions in Kurdistan Province (Northwest of Iran)," Soil and Water Research, Czech Academy of Agricultural Sciences, vol. 5(4), pages 139-145.
    20. Zhu, Zhongrui & Li, Jiusheng & Zhu, Delan, 2024. "Influence of biotic and abiotic factors and water partitioning on the kinetic energy of sprinkler irrigation on a maize canopy," Agricultural Water Management, Elsevier, vol. 293(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jagris:v:12:y:2022:i:7:p:987-:d:858913. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.