IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v90y2018icp475-489.html
   My bibliography  Save this article

Status and prospect of solar heat for industrial processes in China

Author

Listed:
  • jia, Teng
  • Huang, Junpeng
  • Li, Rui
  • He, Peng
  • Dai, Yanjun

Abstract

In the past decades, solar heat for industrial processes (SHIP) have been rapidly developed and applied, and also getting more and more attention all over the world. China is the largest energy consumer with industry accounting for almost 70% of its total energy consumption. Low- and medium-temperature heat takes up 45% of process heat, covering 50–70% of industrial energy consumption, which provides a favorable condition for solar application in industrial processes. China has built developed some demonstration projects to make industrial processes well integrated with solar heating systems. This paper briefly summarizes the status of China's energy consumption, integration of SHIP, as well as available matching solar technologies. Ten typical industrial sectors are selected to specifically describe their potential of SHIP. Moreover, 26 SHIP cases covering the selected 10 sectors are presented by field researches, with capacity of energy saving and emission reduction previously investigated according to their own proportion of SHIP. The potential of SHIP in the 10 sectors are further predicted by optimistically and conservatively making their proportion in SHIP 5.5% and 2% respectively during the period of 2016–2020. The results show that at least 39.40 million tons of coal equivalent and 98.22 million tons of CO2 emission is expected to be reduced in 2020 in China's all industrial sectors although solar can meet different proportions of heat demand in different industrial sectors.

Suggested Citation

  • jia, Teng & Huang, Junpeng & Li, Rui & He, Peng & Dai, Yanjun, 2018. "Status and prospect of solar heat for industrial processes in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 475-489.
    • Handle: RePEc:eee:rensus:v:90:y:2018:i:c:p:475-489
    DOI: 10.1016/j.rser.2018.03.077
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032118301643
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2018.03.077?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kalogirou, Soteris, 2003. "The potential of solar industrial process heat applications," Applied Energy, Elsevier, vol. 76(4), pages 337-361, December.
    2. Saygin, D. & Patel, M.K. & Worrell, E. & Tam, C. & Gielen, D.J., 2011. "Potential of best practice technology to improve energy efficiency in the global chemical and petrochemical sector," Energy, Elsevier, vol. 36(9), pages 5779-5790.
    3. Mekhilef, S. & Saidur, R. & Safari, A., 2011. "A review on solar energy use in industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 1777-1790, May.
    4. Lauterbach, C. & Schmitt, B. & Jordan, U. & Vajen, K., 2012. "The potential of solar heat for industrial processes in Germany," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 5121-5130.
    5. Jiang, Bing & Sun, Zhenqing & Liu, Meiqin, 2010. "China's energy development strategy under the low-carbon economy," Energy, Elsevier, vol. 35(11), pages 4257-4264.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lauma Balode & Kristiāna Dolge & Dagnija Blumberga, 2023. "Sector-Specific Pathways to Sustainability: Unravelling the Most Promising Renewable Energy Options," Sustainability, MDPI, vol. 15(16), pages 1-24, August.
    2. An, G.L. & Wang, L.W. & Gao, J., 2019. "Two-stage cascading desorption cycle for sorption thermal energy storage," Energy, Elsevier, vol. 174(C), pages 1091-1099.
    3. Francisco José Sepúlveda & María Teresa Miranda & Irene Montero & José Ignacio Arranz & Francisco Javier Lozano & Manuel Matamoros & Paloma Rodríguez, 2019. "Analysis of Potential Use of Linear Fresnel Collector for Direct Steam Generation in Industries of the Southwest of Europe," Energies, MDPI, vol. 12(21), pages 1-15, October.
    4. Gil, Juan D. & Topa, A. & Álvarez, J.D. & Torres, J.L. & Pérez, M., 2022. "A review from design to control of solar systems for supplying heat in industrial process applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 163(C).
    5. Jia, Teng & Dou, Pengbo & Chu, Peng & Dai, Yanjun & Markides, Christos N., 2024. "Development and performance evaluation of a high solar contribution resorption-compression cascade heat pump for cold climates," Energy, Elsevier, vol. 302(C).
    6. Jia, Teng & Dou, Pengbo & Chu, Peng & Dai, Yanjun, 2020. "Proposal and performance analysis of a novel solar-assisted resorption-subcooled compression hybrid heat pump system for space heating in cold climate condition," Renewable Energy, Elsevier, vol. 150(C), pages 1136-1150.
    7. Li, Jiarong & Li, Xiangdong & Wang, Yong & Tu, Jiyuan, 2020. "A theoretical model of natural circulation flow and heat transfer within horizontal evacuated tube considering the secondary flow," Renewable Energy, Elsevier, vol. 147(P1), pages 630-638.
    8. An, G.L. & Wu, S.F. & Wang, L.W. & Zhang, C. & Zhang, B., 2022. "Comparative investigations of sorption/resorption/cascading cycles for long-term thermal energy storage," Applied Energy, Elsevier, vol. 306(PA).
    9. Jia, Teng & Dai, Enqian & Dai, Yanjun, 2019. "Thermodynamic analysis and optimization of a balanced-type single-stage NH3-H2O absorption-resorption heat pump cycle for residential heating application," Energy, Elsevier, vol. 171(C), pages 120-134.
    10. Dong, Yan & Zhang, Xinping & Chen, Lingling & Meng, Weifeng & Wang, Cunhai & Cheng, Ziming & Liang, Huaxu & Wang, Fuqiang, 2023. "Progress in passive daytime radiative cooling: A review from optical mechanism, performance test, and application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    11. Khanlari, Ataollah & Tuncer, Azim Doğuş & Sözen, Adnan & Aytaç, İpek & Çiftçi, Erdem & Variyenli, Halil İbrahim, 2022. "Energy and exergy analysis of a vertical solar air heater with nano-enhanced absorber coating and perforated baffles," Renewable Energy, Elsevier, vol. 187(C), pages 586-602.
    12. Hassan, Atazaz & Quanfang, Chen & Abbas, Sajid & Lu, Wu & Youming, Luo, 2021. "An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator," Renewable Energy, Elsevier, vol. 179(C), pages 1849-1864.
    13. Yu, Qiongfen & Zhao, Huirong & Sun, Shengnan & Zhao, Hong & Li, Guoliang & Li, Ming & Wang, Yunfeng, 2019. "Characterization of MgCl2/AC composite adsorbent and its water vapor adsorption for solar drying system application," Renewable Energy, Elsevier, vol. 138(C), pages 1087-1095.
    14. Wang, Zhifeng & Wu, Jiani & Lei, Dongqiang & Liu, Hong & Li, Jinping & Wu, Zhiyong, 2020. "Experimental study on latent thermal energy storage system with gradient porosity copper foam for mid-temperature solar energy application," Applied Energy, Elsevier, vol. 261(C).
    15. Gang Wu & Hui Fang & Yi Zhang & Kun Li & Dan Xu, 2023. "Photothermal and Photovoltaic Utilization for Improving the Thermal Environment of Chinese Solar Greenhouses: A Review," Energies, MDPI, vol. 16(19), pages 1-29, September.
    16. Junaid Ahmed & Laveet Kumar & Abdul Fatah Abbasi & Mamdouh El Haj Assad, 2022. "Energy, Exergy, Environmental and Economic Analysis (4e) of a Solar Thermal System for Process Heating in Jamshoro, Pakistan," Energies, MDPI, vol. 15(22), pages 1-18, November.
    17. Irving Cruz-Robles & Jorge M. Islas-Samperio & Claudio A. Estrada, 2022. "Levelized Cost of Heat of the CSP th Hybrid Central Tower Technology," Energies, MDPI, vol. 15(22), pages 1-23, November.
    18. José M. Cardemil & Ignacio Calderón-Vásquez & Alan Pino & Allan Starke & Ian Wolde & Carlos Felbol & Leonardo F. L. Lemos & Vinicius Bonini & Ignacio Arias & Javier Iñigo-Labairu & Jürgen Dersch & Rod, 2022. "Assessing the Uncertainties of Simulation Approaches for Solar Thermal Systems Coupled to Industrial Processes," Energies, MDPI, vol. 15(9), pages 1-29, May.
    19. Kim, Suyoung & Park, Sae Han & Chang, Ye Ji & Go, Yujin & Kim, Sung Won, 2024. "Carbon nanotube microbeads for enhanced gas heating in a fluidized bed solar air collector," Renewable Energy, Elsevier, vol. 221(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Allouhi, A. & Agrouaz, Y. & Benzakour Amine, Mohammed & Rehman, S. & Buker, M.S. & Kousksou, T. & Jamil, A. & Benbassou, A., 2017. "Design optimization of a multi-temperature solar thermal heating system for an industrial process," Applied Energy, Elsevier, vol. 206(C), pages 382-392.
    2. Farjana, Shahjadi Hisan & Huda, Nazmul & Mahmud, M.A. Parvez & Saidur, R., 2018. "Solar industrial process heating systems in operation – Current SHIP plants and future prospects in Australia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 409-419.
    3. Sharma, Ashish K. & Sharma, Chandan & Mullick, Subhash C. & Kandpal, Tara C., 2017. "Solar industrial process heating: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 124-137.
    4. Romero-Ramos, J.A. & Gil, J.D. & Cardemil, J.M. & Escobar, R.A. & Arias, I. & Pérez-García, M., 2023. "A GIS-AHP approach for determining the potential of solar energy to meet the thermal demand in southeastern Spain productive enclaves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 176(C).
    5. Diego-Ayala, U. & Carrillo, J.G., 2016. "Evaluation of temperature and efficiency in relation to mass flow on a solar flat plate collector in Mexico," Renewable Energy, Elsevier, vol. 96(PA), pages 756-764.
    6. Guillermo Martínez-Rodríguez & Amanda L. Fuentes-Silva & Juan R. Lizárraga-Morazán & Martín Picón-Núñez, 2019. "Incorporating the Concept of Flexible Operation in the Design of Solar Collector Fields for Industrial Applications," Energies, MDPI, vol. 12(3), pages 1-20, February.
    7. Kim, Yong Sin & Balkoski, Kevin & Jiang, Lun & Winston, Roland, 2013. "Efficient stationary solar thermal collector systems operating at a medium-temperature range," Applied Energy, Elsevier, vol. 111(C), pages 1071-1079.
    8. Pankaj Kumar & Krishna Kumar Sinha & Bojan Đurin & Mukesh Kumar Gupta & Nishant Saxena & Malay Kumar Banerjee & Nikola Kranjčić & Suraj Kumar Singh & Shruti Kanga, 2022. "Economics of Implementing Solar Thermal Heating Systems in the Textile Industry," Energies, MDPI, vol. 15(12), pages 1-21, June.
    9. Zhijian Liu & Hao Li & Xinyu Zhang & Guangya Jin & Kewei Cheng, 2015. "Novel Method for Measuring the Heat Collection Rate and Heat Loss Coefficient of Water-in-Glass Evacuated Tube Solar Water Heaters Based on Artificial Neural Networks and Support Vector Machine," Energies, MDPI, vol. 8(8), pages 1-21, August.
    10. Hachicha, Ahmed Amine & Rodríguez, Ivette & Ghenai, Chaouki, 2018. "Thermo-hydraulic analysis and numerical simulation of a parabolic trough solar collector for direct steam generation," Applied Energy, Elsevier, vol. 214(C), pages 152-165.
    11. Li, Lu & Sun, Jie & Li, Yinshi & He, Ya-Ling & Xu, Haojie, 2019. "Transient characteristics of a parabolic trough direct-steam-generation process," Renewable Energy, Elsevier, vol. 135(C), pages 800-810.
    12. Ismail, Muhammad Imran & Yunus, Nor Alafiza & Hashim, Haslenda, 2021. "Integration of solar heating systems for low-temperature heat demand in food processing industry – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    13. Cundapí, Roger & Moya, Sara L. & Valenzuela, Loreto, 2017. "Approaches to modelling a solar field for direct generation of industrial steam," Renewable Energy, Elsevier, vol. 103(C), pages 666-681.
    14. Arpagaus, Cordin & Bless, Frédéric & Uhlmann, Michael & Schiffmann, Jürg & Bertsch, Stefan S., 2018. "High temperature heat pumps: Market overview, state of the art, research status, refrigerants, and application potentials," Energy, Elsevier, vol. 152(C), pages 985-1010.
    15. Gil, Juan D. & Topa, A. & Álvarez, J.D. & Torres, J.L. & Pérez, M., 2022. "A review from design to control of solar systems for supplying heat in industrial process applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 163(C).
    16. Schoeneberger, Carrie A. & McMillan, Colin A. & Kurup, Parthiv & Akar, Sertac & Margolis, Robert & Masanet, Eric, 2020. "Solar for industrial process heat: A review of technologies, analysis approaches, and potential applications in the United States," Energy, Elsevier, vol. 206(C).
    17. Cocco, Daniele & Petrollese, Mario & Tola, Vittorio, 2017. "Exergy analysis of concentrating solar systems for heat and power production," Energy, Elsevier, vol. 130(C), pages 192-203.
    18. Silva, R. & Pérez, M. & Berenguel, M. & Valenzuela, L. & Zarza, E., 2014. "Uncertainty and global sensitivity analysis in the design of parabolic-trough direct steam generation plants for process heat applications," Applied Energy, Elsevier, vol. 121(C), pages 233-244.
    19. Baniassadi, Amir & Momen, Mahyar & Amidpour, Majid, 2015. "A new method for optimization of Solar Heat Integration and solar fraction targeting in low temperature process industries," Energy, Elsevier, vol. 90(P2), pages 1674-1681.
    20. Widyolar, Bennett & Jiang, Lun & Ferry, Jonathan & Winston, Roland, 2018. "Non-tracking East-West XCPC solar thermal collector for 200 celsius applications," Applied Energy, Elsevier, vol. 216(C), pages 521-533.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:90:y:2018:i:c:p:475-489. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.