IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v227y2024ics0960148124006049.html
   My bibliography  Save this article

Experimental assessment of a solar vortex engine integrated with sensible TES at different collector configurations

Author

Listed:
  • Al-Kayiem, Hussain H.
  • Tukkee, Ali M.
  • See, Yuan K.

Abstract

This study presents an experimental investigation of the effect of different solar collector geometrical parameters on the solar vortex engine's (SVE) performance. The first parametric study is concerned with a solar vortex power generation system's diameter, inlet height, and thermal energy storage (TES) extension. The experimental results revealed that extending the TES by 1 m outside the canopy significantly increases thermal efficiency by 62 %. In addition, increasing the diameter of the solar collector from 8.8 m to 10.8 m, with an extra 1 m extended TES area, increased the air temperature rise by 57 %, while the outlet air velocity increased by 32 %. On the other hand, a reduction in the collector inlet height from 0.2 m to 0.15 increased the air temperature rise while decreasing the outlet air velocity and power output potential by mean values of 19 % and 48 %, respectively. The enhancement obtained from the extended area of TES is an important finding, as it increased the air temperature for a larger canopy size without extra cost. Therefore, increasing the absorption area or the TES outside the canopy is recommended. Also, further studies are essential to correlate the inlet height to the system's performance.

Suggested Citation

  • Al-Kayiem, Hussain H. & Tukkee, Ali M. & See, Yuan K., 2024. "Experimental assessment of a solar vortex engine integrated with sensible TES at different collector configurations," Renewable Energy, Elsevier, vol. 227(C).
    • Handle: RePEc:eee:renene:v:227:y:2024:i:c:s0960148124006049
    DOI: 10.1016/j.renene.2024.120539
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148124006049
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2024.120539?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Jing-yin & Guo, Peng-hua & Wang, Yuan, 2012. "Effects of collector radius and chimney height on power output of a solar chimney power plant with turbines," Renewable Energy, Elsevier, vol. 47(C), pages 21-28.
    2. Al-Kayiem, Hussain H. & Aurybi, Mohammed A. & Gilani, Syed I.U. & Ismaeel, Ali A. & Mohammad, Sanan T., 2019. "Performance evaluation of hybrid solar chimney for uninterrupted power generation," Energy, Elsevier, vol. 166(C), pages 490-505.
    3. Al-Kayiem, Hussain H. & Mustafa, Ayad T. & Gilani, Syed I.U., 2018. "Solar vortex engine: Experimental modelling and evaluation," Renewable Energy, Elsevier, vol. 121(C), pages 389-399.
    4. Michaud, L. M., 1999. "Vortex process for capturing mechanical energy during upward heat-convection in the atmosphere," Applied Energy, Elsevier, vol. 62(4), pages 241-251, April.
    5. Badr, Abdullah A. & Ahmed, Omer K. & Alomar, Omar Rafae, 2023. "Performance of solar vortex engine integrated with the PV panel: Experimental assessment," Renewable Energy, Elsevier, vol. 216(C).
    6. Gholamalizadeh, Ehsan & Kim, Man-Hoe, 2016. "CFD (computational fluid dynamics) analysis of a solar-chimney power plant with inclined collector roof," Energy, Elsevier, vol. 107(C), pages 661-667.
    7. Das, Pritam & Chandramohan, V.P., 2019. "Computational study on the effect of collector cover inclination angle, absorber plate diameter and chimney height on flow and performance parameters of solar updraft tower (SUT) plant," Energy, Elsevier, vol. 172(C), pages 366-379.
    8. Al-Kayiem, Hussain H. & Aja, Ogboo Chikere, 2016. "Historic and recent progress in solar chimney power plant enhancing technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 1269-1292.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Habibollahzade, Ali, 2019. "Employing photovoltaic/thermal panels as a solar chimney roof: 3E analyses and multi-objective optimization," Energy, Elsevier, vol. 166(C), pages 118-130.
    2. Attig-Bahar, F. & Guellouz, M.S. & Sahraoui, M. & Kaddeche, S., 2021. "Economic analysis of a 1 MW solar chimney power plant in Tozeur, Tunisia," Renewable Energy, Elsevier, vol. 178(C), pages 456-465.
    3. Kebabsa, Hakim & Said Lounici, Mohand & Daimallah, Ahmed, 2021. "Numerical investigation of a novel tower solar chimney concept," Energy, Elsevier, vol. 214(C).
    4. Das, Pritam & Chandramohan, V.P., 2019. "Computational study on the effect of collector cover inclination angle, absorber plate diameter and chimney height on flow and performance parameters of solar updraft tower (SUT) plant," Energy, Elsevier, vol. 172(C), pages 366-379.
    5. Cristiana Brasil Maia & Janaína de Oliveira Castro Silva, 2022. "CFD Analysis of a Small-Scale Solar Chimney Exposed to Ambient Crosswind," Sustainability, MDPI, vol. 14(22), pages 1-18, November.
    6. Xiong, Hanbing & Ming, Tingzhen & Shi, Tianhao & Wu, Yongjia & Li, Wei & de Richter, Renaud & Zhou, Nan, 2024. "Numerical investigation on performance of solar chimney power plant with three wind resistant structures," Energy, Elsevier, vol. 297(C).
    7. Ming, Tingzhen & Wu, Yongjia & de_Richter, Renaud K. & Liu, Wei & Sherif, S.A., 2017. "Solar updraft power plant system: A brief review and a case study on a new system with radial partition walls in its collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 472-487.
    8. Balijepalli, Ramakrishna & Chandramohan, V.P. & Kirankumar, K., 2020. "Development of a small scale plant for a solar chimney power plant (SCPP): A detailed fabrication procedure, experiments and performance parameters evaluation," Renewable Energy, Elsevier, vol. 148(C), pages 247-260.
    9. Maia, Cristiana Brasil & Castro Silva, Janaína de Oliveira, 2022. "Thermodynamic assessment of a small-scale solar chimney," Renewable Energy, Elsevier, vol. 186(C), pages 35-50.
    10. Zuo, Lu & Liu, Zihan & Dai, Pengzhan & Qu, Ning & Ding, Ling & Zheng, Yuan & Ge, Yunting, 2021. "Economic performance evaluation of the wind supercharging solar chimney power plant combining desalination and waste heat after parameter optimization," Energy, Elsevier, vol. 227(C).
    11. Islam Elsayed & Yoshiki Nishi, 2018. "A Feasibility Study on Power Generation from Solar Thermal Wind Tower: Inclusive Impact Assessment Concerning Environmental and Economic Costs," Energies, MDPI, vol. 11(11), pages 1-18, November.
    12. Maia, Cristiana Brasil & Ferreira, André Guimarães & Cabezas-Gómez, Luben & de Oliveira Castro Silva, Janaína & de Morais Hanriot, Sérgio, 2017. "Thermodynamic analysis of the drying process of bananas in a small-scale solar updraft tower in Brazil," Renewable Energy, Elsevier, vol. 114(PB), pages 1005-1012.
    13. Hu, Siyang & Leung, Dennis Y.C. & Chan, John C.Y., 2017. "Impact of the geometry of divergent chimneys on the power output of a solar chimney power plant," Energy, Elsevier, vol. 120(C), pages 1-11.
    14. Arabhosseini, Akbar & Samimi-Akhijahani, Hadi & Motahayyer, Mehrnosh, 2019. "Increasing the energy and exergy efficiencies of a collector using porous and recycling system," Renewable Energy, Elsevier, vol. 132(C), pages 308-325.
    15. Rabehi, Rayan & Chaker, Abla & Ming, Tingzhen & Gong, Tingrui, 2018. "Numerical simulation of solar chimney power plant adopting the fan model," Renewable Energy, Elsevier, vol. 126(C), pages 1093-1101.
    16. Khosravi, Mohsen & Fazelpour, Farivar & Rosen, Marc A., 2019. "Improved application of a solar chimney concept in a two-story building: An enhanced geometry through a numerical approach," Renewable Energy, Elsevier, vol. 143(C), pages 569-585.
    17. Edmonds, Ian, 2009. "Hot air balloon engine," Renewable Energy, Elsevier, vol. 34(4), pages 1100-1105.
    18. Zygmunt Lipnicki & Marta Gortych & Anna Staszczuk & Tadeusz Kuczyński & Piotr Grabas, 2019. "Analytical and Experimental Investigation of the Solar Chimney System," Energies, MDPI, vol. 12(11), pages 1-13, May.
    19. Nirmalendu Biswas & Dipak Kumar Mandal & Sharmistha Bose & Nirmal K. Manna & Ali Cemal Benim, 2023. "Experimental Treatment of Solar Chimney Power Plant—A Comprehensive Review," Energies, MDPI, vol. 16(17), pages 1-41, August.
    20. Hassan, Aakash & Ali, Majid & Waqas, Adeel, 2018. "Numerical investigation on performance of solar chimney power plant by varying collector slope and chimney diverging angle," Energy, Elsevier, vol. 142(C), pages 411-425.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:227:y:2024:i:c:s0960148124006049. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.