IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v207y2023icp40-46.html
   My bibliography  Save this article

Design and verification of Francis turbine working in sand laden hydro-power plant

Author

Listed:
  • Yang, Jing
  • Peng, Chong
  • Li, Changquan
  • Liu, Xinjun
  • Liu, Jian
  • Wang, Zhengwei

Abstract

Sand erosion is usually severe for hydraulic turbine operated in sediment-laden river hydro-power plant. Continuous erosion and abrasion in hydro-turbine components not only deteriorate the turbine performance but also bring frequent maintenance work. Thus, special attentions should be paid to anti-erosion performance besides the efficiency and stability during the hydraulic design stage. In this paper, the performances of a prototype Francis turbine used for a high head heavy sediment power station were investigated by reducing the rotational speed and using splitter runner. The hydraulic performance, anti-erosion characteristics and cavitation performance were focused and analyzed. The results proved that the velocity in the runner can be effectively reduced by lower the rotational speed, but the rotational speed reduction was also limited by the efficiency and velocity near the guide vane. The splitter runner can significantly improve the disorder flow in runner by re-distributing the velocity field. The erosion resistance of guide vane can be improved by increasing the pitch diameter of the guide vane appropriately. 3100 h of operation after commissioning further confirmed the anti-erosion and stability performance of the designed Francis turbine. This research provide a good reference for the Francis turbine design operated in heavy sediment hydro-power plant.

Suggested Citation

  • Yang, Jing & Peng, Chong & Li, Changquan & Liu, Xinjun & Liu, Jian & Wang, Zhengwei, 2023. "Design and verification of Francis turbine working in sand laden hydro-power plant," Renewable Energy, Elsevier, vol. 207(C), pages 40-46.
    • Handle: RePEc:eee:renene:v:207:y:2023:i:c:p:40-46
    DOI: 10.1016/j.renene.2023.02.088
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148123002392
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2023.02.088?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Thapa, Biraj Singh & Dahlhaug, Ole Gunnar & Thapa, Bhola, 2017. "Sediment erosion induced leakage flow from guide vane clearance gap in a low specific speed Francis turbine," Renewable Energy, Elsevier, vol. 107(C), pages 253-261.
    2. Khanal, Krishna & Neopane, Hari P. & Rai, Shikhar & Thapa, Manoj & Bhatt, Subendu & Shrestha, Rajendra, 2016. "A methodology for designing Francis runner blade to find minimum sediment erosion using CFD," Renewable Energy, Elsevier, vol. 87(P1), pages 307-316.
    3. Aponte, R.D. & Teran, L.A. & Grande, J.F. & Coronado, J.J. & Ladino, J.A. & Larrahondo, F.J. & Rodríguez, S.A., 2020. "Minimizing erosive wear through a CFD multi-objective optimization methodology for different operating points of a Francis turbine," Renewable Energy, Elsevier, vol. 145(C), pages 2217-2232.
    4. Koirala, Ravi & Thapa, Bhola & Neopane, Hari Prasad & Zhu, Baoshan, 2017. "A review on flow and sediment erosion in guide vanes of Francis turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1054-1065.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kumar, Prashant & Singal, S.K. & Gohil, Pankaj P., 2024. "A technical review on combined effect of cavitation and silt erosion on Francis turbine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 190(PB).
    2. Xiao, Yexiang & Guo, Bao & Rai, Anant Kumar & Liu, Jie & Liang, Quanwei & Zhang, Jin, 2022. "Analysis of hydro-abrasive erosion in Pelton buckets using a Eulerian-Lagrangian approach," Renewable Energy, Elsevier, vol. 197(C), pages 472-485.
    3. Leguizamón, Sebastián & Alimirzazadeh, Siamak & Jahanbakhsh, Ebrahim & Avellan, François, 2020. "Multiscale simulation of erosive wear in a prototype-scale Pelton runner," Renewable Energy, Elsevier, vol. 151(C), pages 204-215.
    4. Jing Dong & Zhongdong Qian & Biraj Singh Thapa & Bhola Thapa & Zhiwei Guo, 2019. "Alternative Design of Double-Suction Centrifugal Pump to Reduce the Effects of Silt Erosion," Energies, MDPI, vol. 12(1), pages 1-22, January.
    5. Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Liang, Quanwei & Liu, Jie, 2021. "Analysis of the air-water-sediment flow behavior in Pelton buckets using a Eulerian-Lagrangian approach," Energy, Elsevier, vol. 218(C).
    6. Xiaobo Zheng & Yaping Zhao & Huan Zhang & Yongjian Pu & Zhihua Li & Pengcheng Guo, 2022. "Optimization and Performance Analysis of Francis Turbine Runner Based on Super-Transfer Approximate Method under Multi-Energy Complementary Conditions," Sustainability, MDPI, vol. 14(16), pages 1-16, August.
    7. Guo, Bao & Xiao, Yexiang & Rai, Anant Kumar & Zhang, Jin & Liang, Quanwei, 2020. "Sediment-laden flow and erosion modeling in a Pelton turbine injector," Renewable Energy, Elsevier, vol. 162(C), pages 30-42.
    8. Sun, Yang & Yao, Yuting & Yan, Min & Liu, Jiaming & Li, Haimiao & Bao, Yan & Lu, Mingwei, 2019. "Energy conversion efficiency from low-head water to high-pressure gas," Renewable Energy, Elsevier, vol. 138(C), pages 1-10.
    9. Shamsuddeen, Mohamed Murshid & Park, Jungwan & Choi, Young-Seok & Kim, Jin-Hyuk, 2020. "Unsteady multi-phase cavitation analysis on the effect of anti-cavity fin installed on a Kaplan turbine runner," Renewable Energy, Elsevier, vol. 162(C), pages 861-876.
    10. Thapa, Biraj Singh & Dahlhaug, Ole Gunnar & Thapa, Bhola, 2018. "Flow measurements around guide vanes of Francis turbine: A PIV approach," Renewable Energy, Elsevier, vol. 126(C), pages 177-188.
    11. Goyal, Rahul & Gandhi, Bhupendra K., 2018. "Review of hydrodynamics instabilities in Francis turbine during off-design and transient operations," Renewable Energy, Elsevier, vol. 116(PA), pages 697-709.
    12. Hong, Sheng & Wu, Yuping & Wu, Jianhua & Zhang, Yuquan & Zheng, Yuan & Li, Jiahui & Lin, Jinran, 2021. "Microstructure and cavitation erosion behavior of HVOF sprayed ceramic-metal composite coatings for application in hydro-turbines," Renewable Energy, Elsevier, vol. 164(C), pages 1089-1099.
    13. Laouari, Ahmed & Ghenaiet, Adel, 2021. "Investigation of steady and unsteady cavitating flows through a small Francis turbine," Renewable Energy, Elsevier, vol. 172(C), pages 841-861.
    14. Nirmal Acharya & Saroj Gautam & Sailesh Chitrakar & Chirag Trivedi & Ole Gunnar Dahlhaug, 2021. "Leakage Vortex Progression through a Guide Vane’s Clearance Gap and the Resulting Pressure Fluctuation in a Francis Turbine," Energies, MDPI, vol. 14(14), pages 1-19, July.
    15. Seungjin Lee & Saerom Kim & Jonghyun Chae & Joong Yull Park, 2019. "Additive Aerodynamic and Thermal Effects of a Central Guide Post and Baffle Installed in a Solar Updraft Tower," Energies, MDPI, vol. 12(18), pages 1-13, September.
    16. Xuanlin Peng & Jianzhong Zhou & Chu Zhang & Ruhai Li & Yanhe Xu & Diyi Chen, 2017. "An Intelligent Optimization Method for Vortex-Induced Vibration Reducing and Performance Improving in a Large Francis Turbine," Energies, MDPI, vol. 10(11), pages 1-17, November.
    17. Yu, Zhi-Feng & Wang, Wen-Quan & Yan, Yan & Liu, Xing-Shun, 2021. "Energy loss evaluation in a Francis turbine under overall operating conditions using entropy production method," Renewable Energy, Elsevier, vol. 169(C), pages 982-999.
    18. Adnan Aslam Noon & Man-Hoe Kim, 2021. "Sediment and Cavitation Erosion in Francis Turbines—Review of Latest Experimental and Numerical Techniques," Energies, MDPI, vol. 14(6), pages 1-19, March.
    19. Zhou, Xing & Hu, Xinyi & Huang, Quanshui & Wu, Hegao & Tang, Xiaodan & Cervantes, Michel J., 2024. "Optimization design of an innovative francis draft tube: Insight into improving operational flexibility," Energy, Elsevier, vol. 299(C).
    20. Yexiang Xiao & Bao Guo & Soo-Hwang Ahn & Yongyao Luo & Zhengwei Wang & Guangtai Shi & Yanhao Li, 2019. "Slurry Flow and Erosion Prediction in a Centrifugal Pump after Long-Term Operation," Energies, MDPI, vol. 12(8), pages 1-17, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:207:y:2023:i:c:p:40-46. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.