IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v161y2020icp1011-1024.html
   My bibliography  Save this article

Performance improvement of solar bakery unit by integrating with metal hydride based solar thermal energy storage reactor

Author

Listed:
  • Ayub, Iqra
  • Nasir, Muhammad Salman
  • Liu, Yang
  • Munir, Anjum
  • Yang, Fusheng
  • Zhang, Zaoxiao

Abstract

Storage of solar thermal energy is an effective way to overcome the issue of incompatibility between the solar system and its users. This paper proposed a novel perception by integrating a metal hydride based thermochemical energy storage (MH-TES) system with a solar bakery unit (SBU). A numerical simulation was performed by using COMSOL MULTIPHYSIS 5.3a to assess the dynamic behavior of the reactor. The results showed that the high-temperature metal hydride (HTMH) reactor during the discharging process has a high improvement potential rate (0.195 kW), a high exergetic factor (59.97%) and low exergy efficiency (30.25%) as compared to HTMH reactor during the heat charging process. The overall exergy efficiency of the HTMH reactor was estimated as 34.03%. The maximum value of energy output (Qout), exergy output (Exout), gravimetric exergy output rate (GEOR) and gravimetric efficient heat output rate (GEHOR) during discharging period was calculated as 1560 W, 174 W, 7.4 W/kg and 66 W/kg, respectively. The energy efficiency of SBU is improved from 6% to 42.89% by integrating with the MH-TES system. This paper presents a comprehensive approach for thermal analysis of HTMH for the solar bakery system, which contributes to system optimization for efficient solar energy storage.

Suggested Citation

  • Ayub, Iqra & Nasir, Muhammad Salman & Liu, Yang & Munir, Anjum & Yang, Fusheng & Zhang, Zaoxiao, 2020. "Performance improvement of solar bakery unit by integrating with metal hydride based solar thermal energy storage reactor," Renewable Energy, Elsevier, vol. 161(C), pages 1011-1024.
    • Handle: RePEc:eee:renene:v:161:y:2020:i:c:p:1011-1024
    DOI: 10.1016/j.renene.2020.07.133
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014812031209X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.07.133?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Medrano, Marc & Gil, Antoni & Martorell, Ingrid & Potau, Xavi & Cabeza, Luisa F., 2010. "State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 56-72, January.
    2. Meng, Xiangyu & Yang, Fusheng & Bao, Zewei & Deng, Jianqiang & Serge, Nyallang N. & Zhang, Zaoxiao, 2010. "Theoretical study of a novel solar trigeneration system based on metal hydrides," Applied Energy, Elsevier, vol. 87(6), pages 2050-2061, June.
    3. Yang, Fusheng & Wu, Zhen & Liu, Shengzhe & Zhang, Yang & Wang, Geoff & Zhang, Zaoxiao & Wang, Yuqi, 2018. "Theoretical formulation and performance analysis of a novel hydride heat Pump(HHP) integrated heat recovery system," Energy, Elsevier, vol. 163(C), pages 208-220.
    4. Kumaresan, G. & Santosh, R. & Raju, G. & Velraj, R., 2018. "Experimental and numerical investigation of solar flat plate cooking unit for domestic applications," Energy, Elsevier, vol. 157(C), pages 436-447.
    5. Azaizia, Zaineb & Kooli, Sami & Hamdi, Ilhem & Elkhal, Wissem & Guizani, Amen Allah, 2020. "Experimental study of a new mixed mode solar greenhouse drying system with and without thermal energy storage for pepper," Renewable Energy, Elsevier, vol. 145(C), pages 1972-1984.
    6. Corgnale, Claudio & Hardy, Bruce & Motyka, Theodore & Zidan, Ragaiy & Teprovich, Joseph & Peters, Brent, 2014. "Screening analysis of metal hydride based thermal energy storage systems for concentrating solar power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 821-833.
    7. Lecuona, Antonio & Nogueira, José-Ignacio & Ventas, Rubén & Rodríguez-Hidalgo, María-del-Carmen & Legrand, Mathieu, 2013. "Solar cooker of the portable parabolic type incorporating heat storage based on PCM," Applied Energy, Elsevier, vol. 111(C), pages 1136-1146.
    8. Vásquez, José & Reyes, Alejandro & Pailahueque, Nicolás, 2019. "Modeling, simulation and experimental validation of a solar dryer for agro-products with thermal energy storage system," Renewable Energy, Elsevier, vol. 139(C), pages 1375-1390.
    9. Feng, Penghui & Wu, Zhen & Zhang, Yang & Yang, Fusheng & Wang, Yuqi & Zhang, Zaoxiao, 2018. "Multi-level configuration and optimization of a thermal energy storage system using a metal hydride pair," Applied Energy, Elsevier, vol. 217(C), pages 25-36.
    10. Gil, Antoni & Medrano, Marc & Martorell, Ingrid & Lázaro, Ana & Dolado, Pablo & Zalba, Belén & Cabeza, Luisa F., 2010. "State of the art on high temperature thermal energy storage for power generation. Part 1--Concepts, materials and modellization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 31-55, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Martin Beer & Radim Rybár & Jana Rybárová & Andrea Seňová & Vojtech Ferencz, 2021. "Numerical Analysis of Concentrated Solar Heaters for Segmented Heat Accumulators," Energies, MDPI, vol. 14(14), pages 1-20, July.
    2. Zhu, Chen & Mou, Xiaofeng & Bao, Zewei, 2024. "Optimization of tree-shaped fin structures towards enhanced discharging performance of metal hydride reactor for thermochemical heat storage based on entransy theory," Renewable Energy, Elsevier, vol. 220(C).
    3. Sreeraj, R. & Aadhithiyan, A.K. & Anbarasu, S., 2022. "Comparison, advancement, and performance evaluation of heat exchanger assembly in solid-state hydrogen storage device," Renewable Energy, Elsevier, vol. 198(C), pages 667-678.
    4. Liyew, Kassa W. & Habtu, Nigus G. & Louvet, Yoann & Guta, Dawit D. & Jordan, Ulrike, 2021. "Technical design, costs, and greenhouse gas emissions of solar Injera baking stoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    5. Liu, Yang & Wang, Hongxia & Ayub, Iqra & Yang, Fusheng & Wu, Zhen & Zhang, Zaoxiao, 2021. "A variable cross-section annular fins type metal hydride reactor for improving the phenomenon of inhomogeneous reaction in the thermal energy storage processes," Applied Energy, Elsevier, vol. 295(C).
    6. Ruan, Zhaohui & Sun, Weiwei & Yuan, Yuan & Tan, Heping, 2023. "Accurately forecasting solar radiation distribution at both spatial and temporal dimensions simultaneously with fully-convolutional deep neural network model," Renewable and Sustainable Energy Reviews, Elsevier, vol. 184(C).
    7. Marco Briceño-León & Dennys Pazmiño-Quishpe & Jean-Michel Clairand & Guillermo Escrivá-Escrivá, 2021. "Energy Efficiency Measures in Bakeries toward Competitiveness and Sustainability—Case Studies in Quito, Ecuador," Sustainability, MDPI, vol. 13(9), pages 1-20, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Malleswararao, K. & Aswin, N. & Srinivasa Murthy, S. & Dutta, Pradip, 2022. "Studies on long-term and buffer modes of operations of a thermal energy storage system using coupled metal hydrides," Energy, Elsevier, vol. 258(C).
    2. Feng, Penghui & Liu, Yang & Ayub, Iqra & Wu, Zhen & Yang, Fusheng & Zhang, Zaoxiao, 2019. "Techno-economic analysis of screening metal hydride pairs for a 910 MWhth thermal energy storage system," Applied Energy, Elsevier, vol. 242(C), pages 148-156.
    3. Islam, Md Tasbirul & Huda, Nazmul & Abdullah, A.B. & Saidur, R., 2018. "A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: Current status and research trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 987-1018.
    4. Muñoz, J. & Martínez-Val, J.M. & Abbas, R. & Abánades, A., 2012. "Dry cooling with night cool storage to enhance solar power plants performance in extreme conditions areas," Applied Energy, Elsevier, vol. 92(C), pages 429-436.
    5. Mao, Qianjun, 2016. "Recent developments in geometrical configurations of thermal energy storage for concentrating solar power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 320-327.
    6. Bruch, A. & Molina, S. & Esence, T. & Fourmigué, J.F. & Couturier, R., 2017. "Experimental investigation of cycling behaviour of pilot-scale thermal oil packed-bed thermal storage system," Renewable Energy, Elsevier, vol. 103(C), pages 277-285.
    7. Usaola, Julio, 2012. "Participation of CSP plants in the reserve markets: A new challenge for regulators," Energy Policy, Elsevier, vol. 49(C), pages 562-571.
    8. Rao, A. Gangoli & van den Oudenalder, F.S.C. & Klein, S.A., 2019. "Natural gas displacement by wind curtailment utilization in combined-cycle power plants," Energy, Elsevier, vol. 168(C), pages 477-491.
    9. Alva, Guruprasad & Lin, Yaxue & Fang, Guiyin, 2018. "An overview of thermal energy storage systems," Energy, Elsevier, vol. 144(C), pages 341-378.
    10. Zhao, Yongliang & Song, Jian & Liu, Ming & Zhao, Yao & Olympios, Andreas V. & Sapin, Paul & Yan, Junjie & Markides, Christos N., 2022. "Thermo-economic assessments of pumped-thermal electricity storage systems employing sensible heat storage materials," Renewable Energy, Elsevier, vol. 186(C), pages 431-456.
    11. Miró, Laia & Oró, Eduard & Boer, Dieter & Cabeza, Luisa F., 2015. "Embodied energy in thermal energy storage (TES) systems for high temperature applications," Applied Energy, Elsevier, vol. 137(C), pages 793-799.
    12. Fernández, Angel G. & Gomez-Vidal, Judith & Oró, Eduard & Kruizenga, Alan & Solé, Aran & Cabeza, Luisa F., 2019. "Mainstreaming commercial CSP systems: A technology review," Renewable Energy, Elsevier, vol. 140(C), pages 152-176.
    13. Li, Han & Li, Jinchao & Kong, Xiangfei & Long, Hao & Yang, Hua & Yao, Chengqiang, 2020. "A novel solar thermal system combining with active phase-change material heat storage wall (STS-APHSW): Dynamic model, validation and thermal performance," Energy, Elsevier, vol. 201(C).
    14. Fazlollahi, Samira & Schüler, Nils & Maréchal, François, 2015. "A solid thermal storage model for the optimization of buildings operation strategy," Energy, Elsevier, vol. 88(C), pages 209-222.
    15. Arteconi, A. & Hewitt, N.J. & Polonara, F., 2012. "State of the art of thermal storage for demand-side management," Applied Energy, Elsevier, vol. 93(C), pages 371-389.
    16. Fernández, Ángel G. & Gomez-Vidal, Judith C., 2017. "Thermophysical properties of low cost lithium nitrate salts produced in northern Chile for thermal energy storage," Renewable Energy, Elsevier, vol. 101(C), pages 120-125.
    17. Huang, Shucheng & Khajepour, Amir, 2022. "A new adiabatic compressed air energy storage system based on a novel compression strategy," Energy, Elsevier, vol. 242(C).
    18. Navarro, Lidia & de Gracia, Alvaro & Colclough, Shane & Browne, Maria & McCormack, Sarah J. & Griffiths, Philip & Cabeza, Luisa F., 2016. "Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systems," Renewable Energy, Elsevier, vol. 88(C), pages 526-547.
    19. Khatri, Rahul & Goyal, Rahul & Sharma, Ravi Kumar, 2021. "Advances in the developments of solar cooker for sustainable development: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    20. Nomura, Takahiro & Zhu, Chunyu & Nan, Sheng & Tabuchi, Kazuki & Wang, Shuangfeng & Akiyama, Tomohiro, 2016. "High thermal conductivity phase change composite with a metal-stabilized carbon-fiber network," Applied Energy, Elsevier, vol. 179(C), pages 1-6.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:161:y:2020:i:c:p:1011-1024. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.