IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v295y2021ics0306261921005262.html
   My bibliography  Save this article

A variable cross-section annular fins type metal hydride reactor for improving the phenomenon of inhomogeneous reaction in the thermal energy storage processes

Author

Listed:
  • Liu, Yang
  • Wang, Hongxia
  • Ayub, Iqra
  • Yang, Fusheng
  • Wu, Zhen
  • Zhang, Zaoxiao

Abstract

Metal hydride (MH) has been of great interest as one of the potential thermochemical heat storage materials. Previous studies have revealed that with the progress of the reaction, the inhomogeneous reaction will gradually appear in the metal hydride heat storage reactor (MHHSR), which will lead to the decrease of the heat output capacity of the reactor. In this study, an innovative MHHSR with a variable cross-section annular fin (VCSAF) structure is proposed. The thermal coupling model between the powder bed and VCSAF is established. It is found that the VCSAF can effectively resolve the inhomogeneous reaction phenomenon in the reaction process by adjusting the inclination angle between outer profile of VCSAF and outer edge of bed (θfin). At the same time, the influence of different fin structures parameters is analyzed on the uniformity of the reactor based on sensitivity analysis. The width of the largest fin (Lfin,max) is the main factor affecting the uniformity in comparison with fin thickness (hfin), fin spacing (Δh). With the increase of Lfin,max, Δh and hfin, exergy output (Ex,out) changes from 266.12 kJ to 249.65 kJ, 222.64 kJ to 282.99 kJ, and 264.01 kJ to 255.82 kJ, respectively, gravimetric exergy-output power of reactor (GEOPR) changes from 41.96 W kg−1 to 48.22 W kg−1, 49.88 W kg−1 to 42.41 W kg−1, and 43.11 W kg−1 to 47.40 W kg−1, respectively, and gravimetric efficient exergy-output (GEEO) remains unchanged. Besides, the simulation results of four different designs: no fin (NF), same cross-section fin (SCSF), longitudinal fin (LF) and VCSAF are compared to assess their performance. Compared to NF, SCSF and LF, VCSAF has a more uniform heat transfer effect and better performance. Finally, the performance improvement of the enlarged VCSAF reactor is analyzed. With the increase of length (L), the platform end time difference between the SCSF and VCSAF and between LF and VCSAF (Δt1 and Δt2) increases from 800 s to 2800 s and 2250 s to 4800 s, respectively. Compared with NF, the growth rates of Ex,out, exergy efficiency (ηEx), GEEO and GEOPR for VCSAF change from 4.04% to 16.07%, 6.79% to 14.42%, 10.60% to 22.22%, and 31.74% to 6.81%, respectively. Compared with SCSF, the growth rates of Ex,out, ηEx, GEEO and GEOPR change from 12.41% to 26.23%, 9.74% to 17.97%, 12.54% to 26.01%, and 5.00% to 2.18%, respectively. Compared with LF, the growth rates of Ex,out, ηEx, GEEO and GEOPR change from 14.52% to 34.02%, 10.12% to 20.18%, 13.53% to 27.99%, and 7.70% to 5.56%, respectively. The VCSAF structure has an excellent performance in eliminating inhomogeneous reaction. With the enlargement of the reactor, the heat output capacity has been improved obviously, which has an important guiding significance for the engineering application of the MH high-temperature heat storage technology.

Suggested Citation

  • Liu, Yang & Wang, Hongxia & Ayub, Iqra & Yang, Fusheng & Wu, Zhen & Zhang, Zaoxiao, 2021. "A variable cross-section annular fins type metal hydride reactor for improving the phenomenon of inhomogeneous reaction in the thermal energy storage processes," Applied Energy, Elsevier, vol. 295(C).
    • Handle: RePEc:eee:appene:v:295:y:2021:i:c:s0306261921005262
    DOI: 10.1016/j.apenergy.2021.117073
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261921005262
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2021.117073?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Vamsi Krishna Kukkapalli & Sunwoo Kim, 2016. "Optimization of Internal Cooling Fins for Metal Hydride Reactors," Energies, MDPI, vol. 9(6), pages 1-12, June.
    2. Sun, Hao & Li, Yingjie & Yan, Xianyao & Zhao, Jianli & Wang, Zeyan, 2020. "Thermochemical energy storage performance of Al2O3/CeO2 co-doped CaO-based material under high carbonation pressure," Applied Energy, Elsevier, vol. 263(C).
    3. Feng, Penghui & Wu, Zhen & Zhang, Yang & Yang, Fusheng & Wang, Yuqi & Zhang, Zaoxiao, 2018. "Multi-level configuration and optimization of a thermal energy storage system using a metal hydride pair," Applied Energy, Elsevier, vol. 217(C), pages 25-36.
    4. Lin, Yaxue & Alva, Guruprasad & Fang, Guiyin, 2018. "Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials," Energy, Elsevier, vol. 165(PA), pages 685-708.
    5. Wang, Di & Wang, Yuqi & Huang, Zhuonan & Yang, Fusheng & Wu, Zhen & Zheng, Lan & Wu, Le & Zhang, Zaoxiao, 2019. "Design optimization and sensitivity analysis of the radiation mini-channel metal hydride reactor," Energy, Elsevier, vol. 173(C), pages 443-456.
    6. Kenisarin, Murat M., 2010. "High-temperature phase change materials for thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 955-970, April.
    7. Prieto, Cristina & Cabeza, Luisa F., 2019. "Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP). Concept and plant performance," Applied Energy, Elsevier, vol. 254(C).
    8. Bao, Zewei & Yang, Fusheng & Wu, Zhen & Cao, Xinxin & Zhang, Zaoxiao, 2013. "Simulation studies on heat and mass transfer in high-temperature magnesium hydride reactors," Applied Energy, Elsevier, vol. 112(C), pages 1181-1189.
    9. Yu, Qiang & Li, Xiaolei & Wang, Zhifeng & Zhang, Qiangqiang, 2020. "Modeling and dynamic simulation of thermal energy storage system for concentrating solar power plant," Energy, Elsevier, vol. 198(C).
    10. Ayub, Iqra & Nasir, Muhammad Salman & Liu, Yang & Munir, Anjum & Yang, Fusheng & Zhang, Zaoxiao, 2020. "Performance improvement of solar bakery unit by integrating with metal hydride based solar thermal energy storage reactor," Renewable Energy, Elsevier, vol. 161(C), pages 1011-1024.
    11. Lizana, Jesús & Chacartegui, Ricardo & Barrios-Padura, Angela & Valverde, José Manuel, 2017. "Advances in thermal energy storage materials and their applications towards zero energy buildings: A critical review," Applied Energy, Elsevier, vol. 203(C), pages 219-239.
    12. Zaversky, Fritz & Pérez de Zabalza Asiain, Javier & Sánchez, Marcelino, 2017. "Transient response simulation of a passive sensible heat storage system and the comparison to a conventional active indirect two-tank unit," Energy, Elsevier, vol. 139(C), pages 782-797.
    13. Vigneshwaran, K. & Sodhi, Gurpreet Singh & Muthukumar, P. & Guha, Anurag & Senthilmurugan, S., 2019. "Experimental and numerical investigations on high temperature cast steel based sensible heat storage system," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    14. He, Ya-Ling & Qiu, Yu & Wang, Kun & Yuan, Fan & Wang, Wen-Qi & Li, Ming-Jia & Guo, Jia-Qi, 2020. "Perspective of concentrating solar power," Energy, Elsevier, vol. 198(C).
    15. Corgnale, Claudio & Hardy, Bruce & Motyka, Theodore & Zidan, Ragaiy & Teprovich, Joseph & Peters, Brent, 2014. "Screening analysis of metal hydride based thermal energy storage systems for concentrating solar power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 821-833.
    16. Lin, Yaxue & Jia, Yuting & Alva, Guruprasad & Fang, Guiyin, 2018. "Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2730-2742.
    17. Chung, C.A. & Yang, Su-Wen & Yang, Chien-Yuh & Hsu, Che-Weu & Chiu, Pai-Yuh, 2013. "Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer," Applied Energy, Elsevier, vol. 103(C), pages 581-587.
    18. Tian, Y. & Zhao, C.Y., 2013. "A review of solar collectors and thermal energy storage in solar thermal applications," Applied Energy, Elsevier, vol. 104(C), pages 538-553.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pujari, Ankush Shankar & Majumdar, Rudrodip & Saha, Sandip K. & Subramaniam, Chandramouli, 2023. "Annular vertical cylindrical thermochemical storage system with innovative flow arrangements for improved heat dispatch towards space heating requirements," Renewable Energy, Elsevier, vol. 217(C).
    2. Krane, Patrick & Nash, Austin L. & Ziviani, Davide & Braun, James E. & Marconnet, Amy M. & Jain, Neera, 2022. "Dynamic modeling and control of a two-reactor metal hydride energy storage system," Applied Energy, Elsevier, vol. 325(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lin, Xi & Zhu, Qi & Leng, Haiyan & Yang, Hongguang & Lyu, Tao & Li, Qian, 2019. "Numerical analysis of the effects of particle radius and porosity on hydrogen absorption performances in metal hydride tank," Applied Energy, Elsevier, vol. 250(C), pages 1065-1072.
    2. Ye, Yang & Lu, Jianfeng & Ding, Jing & Wang, Weilong & Yan, Jinyue, 2020. "Numerical simulation on the storage performance of a phase change materials based metal hydride hydrogen storage tank," Applied Energy, Elsevier, vol. 278(C).
    3. Rostami, Sara & Afrand, Masoud & Shahsavar, Amin & Sheikholeslami, M. & Kalbasi, Rasool & Aghakhani, Saeed & Shadloo, Mostafa Safdari & Oztop, Hakan F., 2020. "A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage," Energy, Elsevier, vol. 211(C).
    4. Wang, Di & Wang, Yuqi & Wang, Feng & Zheng, Shuaishuai & Guan, Sinan & Zheng, Lan & Wu, Le & Yang, Xin & Lv, Ming & Zhang, Zaoxiao, 2022. "Optimal design of disc mini-channel metal hydride reactor with high hydrogen storage efficiency," Applied Energy, Elsevier, vol. 308(C).
    5. Liu, Yang & Ayub, Iqra & Khan, Muhammad Raheel & Yang, Fusheng & Wu, Zhen & Zhang, Zaoxiao, 2022. "Numerical investigation of metal hydride heat storage reactor with two types multiple heat transfer tubes structures," Energy, Elsevier, vol. 253(C).
    6. Tombrink, Jonas & Bauer, Dan, 2022. "Demand-based process steam from renewable energy: Implementation and sizing of a latent heat thermal energy storage system based on the Rotating Drum Heat Exchanger," Applied Energy, Elsevier, vol. 321(C).
    7. Yu, Kunyang & Liu, Yushi & Yang, Yingzi, 2021. "Review on form-stable inorganic hydrated salt phase change materials: Preparation, characterization and effect on the thermophysical properties," Applied Energy, Elsevier, vol. 292(C).
    8. Klimeš, Lubomír & Charvát, Pavel & Mastani Joybari, Mahmood & Zálešák, Martin & Haghighat, Fariborz & Panchabikesan, Karthik & El Mankibi, Mohamed & Yuan, Yanping, 2020. "Computer modelling and experimental investigation of phase change hysteresis of PCMs: The state-of-the-art review," Applied Energy, Elsevier, vol. 263(C).
    9. Jiang, Feng & Ge, Zhiwei & Ling, Xiang & Cang, Daqiang & Zhang, Lingling & Ding, Yulong, 2021. "Improved thermophysical properties of shape-stabilized NaNO3 using a modified diatomite-based porous ceramic for solar thermal energy storage," Renewable Energy, Elsevier, vol. 179(C), pages 327-338.
    10. Wu, Chunlei & Wang, Qing & Wang, Xinmin & Sun, Shipeng & Wang, Yuqi & Wu, Shuang & Bai, Jingru & Sheng, Hongyu & Zhang, Jinghui, 2024. "Al2O3 nanoparticles integration for comprehensive enhancement of eutectic salt thermal performance: Experimental design, molecular dynamics calculations, and system simulation studies," Energy, Elsevier, vol. 292(C).
    11. Beyne, W. & T'Jollyn, I. & Lecompte, S. & Cabeza, L.F. & De Paepe, M., 2023. "Standardised methods for the determination of key performance indicators for thermal energy storage heat exchangers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 176(C).
    12. Islam, Md Tasbirul & Huda, Nazmul & Abdullah, A.B. & Saidur, R., 2018. "A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: Current status and research trends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 987-1018.
    13. Mao, Qianjun, 2016. "Recent developments in geometrical configurations of thermal energy storage for concentrating solar power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 320-327.
    14. Dubey, Abhayjeet kumar & Sun, Jingyi & Choudhary, Tushar & Dash, Madhusmita & Rakshit, Dibakar & Ansari, M Zahid & Ramakrishna, Seeram & Liu, Yong & Nanda, Himansu Sekhar, 2023. "Emerging phase change materials with improved thermal efficiency for a clean and sustainable environment: An approach towards net zero," Renewable and Sustainable Energy Reviews, Elsevier, vol. 182(C).
    15. Wang, Hanxi & Xu, Jianling & Sheng, Lianxi, 2019. "Study on the comprehensive utilization of city kitchen waste as a resource in China," Energy, Elsevier, vol. 173(C), pages 263-277.
    16. Giovanni Salvatore Sau & Valerio Tripi & Anna Chiara Tizzoni & Raffaele Liberatore & Emiliana Mansi & Annarita Spadoni & Natale Corsaro & Mauro Capocelli & Tiziano Delise & Anna Della Libera, 2021. "High-Temperature Chloride-Carbonate Phase Change Material: Thermal Performances and Modelling of a Packed Bed Storage System for Concentrating Solar Power Plants," Energies, MDPI, vol. 14(17), pages 1-17, August.
    17. Michał Jurczyk & Tomasz Spietz & Agata Czardybon & Szymon Dobras & Karina Ignasiak & Łukasz Bartela & Wojciech Uchman & Jakub Ochmann, 2024. "Review of Thermal Energy Storage Materials for Application in Large-Scale Integrated Energy Systems—Methodology for Matching Heat Storage Solutions for Given Applications," Energies, MDPI, vol. 17(14), pages 1-28, July.
    18. Li, Han & Li, Jinchao & Kong, Xiangfei & Long, Hao & Yang, Hua & Yao, Chengqiang, 2020. "A novel solar thermal system combining with active phase-change material heat storage wall (STS-APHSW): Dynamic model, validation and thermal performance," Energy, Elsevier, vol. 201(C).
    19. Khor, J.O. & Sze, J.Y. & Li, Y. & Romagnoli, A., 2020. "Overcharging of a cascaded packed bed thermal energy storage: Effects and solutions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 117(C).
    20. Costa, Sol Carolina & Kenisarin, Murat, 2022. "A review of metallic materials for latent heat thermal energy storage: Thermophysical properties, applications, and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:295:y:2021:i:c:s0306261921005262. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.