IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v159y2020icp336-345.html
   My bibliography  Save this article

Sulfonated polyethersulfone/polyetheretherketone blend as high performing and cost-effective electrolyte membrane for direct methanol fuel cells

Author

Listed:
  • Simari, C.
  • Lo Vecchio, C.
  • Baglio, V.
  • Nicotera, I.

Abstract

Blended electrolyte membranes based on sulfonated Polyethersulfone (sPES) and sulfonated Poly(ether ether ketone) (sPEEK) were prepared in two different ratios (i.e. 50/50 and 25/75) via a simple, scalable and inexpensive solution casting process to investigate their suitability for direct methanol fuel cell (DMFC) applications. Thermo-mechanical analysis revealed higher flexibility and thermal resistance with the blending of these two macromolecules, without any evidence of phase-segregation, and with good chemical stability. Furthermore, the proton transport was facilitated while the methanol permeability was dramatically reduced. The DMFC tests confirmed outstanding performance by using the membrane with the blend ratio 25/75, reaching a power density of about 130 mW cm−2 at 80 °C in 4 M methanol solution. These features and the cost-effectiveness of sPES-SPEEK membranes make them interesting candidates for use in next-generation DMFCs.

Suggested Citation

  • Simari, C. & Lo Vecchio, C. & Baglio, V. & Nicotera, I., 2020. "Sulfonated polyethersulfone/polyetheretherketone blend as high performing and cost-effective electrolyte membrane for direct methanol fuel cells," Renewable Energy, Elsevier, vol. 159(C), pages 336-345.
  • Handle: RePEc:eee:renene:v:159:y:2020:i:c:p:336-345
    DOI: 10.1016/j.renene.2020.06.053
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120309599
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2020.06.053?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Muthumeenal, A. & Neelakandan, S. & Kanagaraj, P. & Nagendran, A., 2016. "Synthesis and properties of novel proton exchange membranes based on sulfonated polyethersulfone and N-phthaloyl chitosan blends for DMFC applications," Renewable Energy, Elsevier, vol. 86(C), pages 922-929.
    2. Chuesutham, Thirayu & Sirivat, Anuvat & Paradee, Nophawan & Changkhamchom, Sairung & Wattanakul, Karnthidaporn & Anumart, Songsak & Krathumkhet, Nattinee & Khampim, Jarumat, 2019. "Improvement of sulfonated poly(ether ether ketone)/Y zeolite -SO3H via organo-functionalization method for direct methanol fuel cell," Renewable Energy, Elsevier, vol. 138(C), pages 243-249.
    3. Uma Devi, A. & Muthumeenal, A. & Sabarathinam, R.M. & Nagendran, A., 2017. "Fabrication and electrochemical properties of SPVdF-co-HFP/SPES blend proton exchange membranes for direct methanol fuel cells," Renewable Energy, Elsevier, vol. 102(PA), pages 258-265.
    4. Nagar, Harsha & Sahu, Nivedita & Basava Rao, V.V. & Sridhar, S., 2020. "Surface modification of sulfonated polyethersulfone membrane with polyaniline nanoparticles for application in direct methanol fuel cell," Renewable Energy, Elsevier, vol. 146(C), pages 1262-1277.
    5. Sopian, Kamaruzzaman & Wan Daud, Wan Ramli, 2006. "Challenges and future developments in proton exchange membrane fuel cells," Renewable Energy, Elsevier, vol. 31(5), pages 719-727.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kusworo, Tutuk Djoko & Widayat, Widayat & Utomo, Dani Puji & Pratama, Yulius Harmawan Setya & Arianti, Riska Anindisa Vira, 2020. "Performance evaluation of modified nanohybrid membrane polyethersulfone-nano ZnO (PES-nano ZnO) using three combination effect of PVP, irradiation of ultraviolet and thermal for biodiesel purification," Renewable Energy, Elsevier, vol. 148(C), pages 935-945.
    2. Nagar, Harsha & Aniya, Vineet & Mondal, Prasenjit, 2020. "High proton conductivity dual modified ionic crosslink membrane for fuel cell application at low humidity condition with molecular dynamics simulations," Renewable Energy, Elsevier, vol. 160(C), pages 1036-1047.
    3. Abdelkareem, Mohammad Ali & Allagui, Anis & Sayed, Enas Taha & El Haj Assad, M. & Said, Zafar & Elsaid, Khaled, 2019. "Comparative analysis of liquid versus vapor-feed passive direct methanol fuel cells," Renewable Energy, Elsevier, vol. 131(C), pages 563-584.
    4. Hasani-Sadrabadi, Mohammad Mahdi & Dashtimoghadam, Erfan & Ghaffarian, Seyed Reza & Hasani Sadrabadi, Mohammad Hossein & Heidari, Mahdi & Moaddel, Homayoun, 2010. "Novel high-performance nanocomposite proton exchange membranes based on poly (ether sulfone)," Renewable Energy, Elsevier, vol. 35(1), pages 226-231.
    5. Cheng, Shan-Jen & Miao, Jr-Ming & Wu, Sheng-Ju, 2012. "Investigating the effects of operational factors on PEMFC performance based on CFD simulations using a three-level full-factorial design," Renewable Energy, Elsevier, vol. 39(1), pages 250-260.
    6. Wu, Sheng-Ju & Shiah, Sheau-Wen & Yu, Wei-Lung, 2009. "Parametric analysis of proton exchange membrane fuel cell performance by using the Taguchi method and a neural network," Renewable Energy, Elsevier, vol. 34(1), pages 135-144.
    7. Muhammad Asyraf Azni & Rasyikah Md Khalid, 2021. "Hydrogen Fuel Cell Legal Framework in the United States, Germany, and South Korea—A Model for a Regulation in Malaysia," Sustainability, MDPI, vol. 13(4), pages 1-14, February.
    8. Kim, Sung Han & Miesse, Craig M. & Lee, Hee Bum & Chang, Ik Whang & Hwang, Yong Sheen & Jang, Jae Hyuk & Cha, Suk Won, 2014. "Ultra compact direct hydrogen fuel cell prototype using a metal hydride hydrogen storage tank for a mobile phone," Applied Energy, Elsevier, vol. 134(C), pages 382-391.
    9. Sagar Roy & Smruti Ragunath, 2018. "Emerging Membrane Technologies for Water and Energy Sustainability: Future Prospects, Constraints and Challenges," Energies, MDPI, vol. 11(11), pages 1-32, November.
    10. Ismail, M.S. & Ingham, D.B. & Ma, L. & Pourkashanian, M., 2013. "The contact resistance between gas diffusion layers and bipolar plates as they are assembled in proton exchange membrane fuel cells," Renewable Energy, Elsevier, vol. 52(C), pages 40-45.
    11. Pourzare, K. & Mansourpanah, Y. & Farhadi, S. & Sadrabadi, M.M. Hasani & Ulbricht, M., 2022. "Improvement of proton conductivity of magnetically aligned phosphotungstic acid-decorated cobalt oxide embedded Nafion membrane," Energy, Elsevier, vol. 239(PA).
    12. Muhammad Asyraf Azni & Rasyikah Md Khalid & Umi Azmah Hasran & Siti Kartom Kamarudin, 2023. "Review of the Effects of Fossil Fuels and the Need for a Hydrogen Fuel Cell Policy in Malaysia," Sustainability, MDPI, vol. 15(5), pages 1-16, February.
    13. Díaz, Manuel Antonio & Iranzo, Alfredo & Rosa, Felipe & Isorna, Fernando & López, Eduardo & Bolivar, Juan Pedro, 2015. "Effect of carbon dioxide on the contamination of low temperature and high temperature PEM (polymer electrolyte membrane) fuel cells. Influence of temperature, relative humidity and analysis of regener," Energy, Elsevier, vol. 90(P1), pages 299-309.
    14. Chiharu Misaki & Daisuke Hara & Noboru Katayama & Kiyoshi Dowaki, 2020. "Improvement of Power Capacity of Electric-Assisted Bicycles Using Fuel Cells with Metal Hydride," Energies, MDPI, vol. 13(23), pages 1-17, November.
    15. Ingabire, Providence Buregeya & Pan, Xueting & Haragirimana, Alphonse & Li, Na & Hu, Zhaoxia & Chen, Shouwen, 2020. "Improved hydroxide conductivity and performance of nanocomposite membrane derived on quaternized polymers incorporated by titanium dioxide modified graphitic carbon nitride for fuel cells," Renewable Energy, Elsevier, vol. 152(C), pages 590-600.
    16. Rao, Zhonghao & Wang, Shuangfeng, 2011. "A review of power battery thermal energy management," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(9), pages 4554-4571.
    17. Eman A. El Desouky & Emad A. Soliman & Hessa H. Al-Rasheed & Ayman El-Faham & M. A. Abu-Saied, 2023. "Novel Proton Exchange Membranes Based on Sulfonated Poly(acrylonitrile- co -glycidyl methacrylate)/Poly(vinyl chloride) Composite," Sustainability, MDPI, vol. 15(14), pages 1-24, July.
    18. Mohideen, Mohamedazeem M. & Liu, Yong & Ramakrishna, Seeram, 2020. "Recent progress of carbon dots and carbon nanotubes applied in oxygen reduction reaction of fuel cell for transportation," Applied Energy, Elsevier, vol. 257(C).
    19. Zhou, Jing & Cao, Jiamu & Zhang, Yufeng & Liu, Junfeng & Chen, Junyu & Li, Mingxue & Wang, Weiqi & Liu, Xiaowei, 2021. "Overcoming undesired fuel crossover: Goals of methanol-resistant modification of polymer electrolyte membranes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    20. Teng, Fei & Sun, Yuling & Chen, Fang & Qin, Aning & Zhang, Qi, 2021. "Technology opportunity discovery of proton exchange membrane fuel cells based on generative topographic mapping," Technological Forecasting and Social Change, Elsevier, vol. 169(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:159:y:2020:i:c:p:336-345. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.