IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v147y2020ip1p155-163.html
   My bibliography  Save this article

An experimental design of the solid oxide fuel cell performance by using partially oxidation reforming of natural gas

Author

Listed:
  • Farnak, M.
  • Esfahani, J.A.
  • Bozorgmehri, S.

Abstract

The suitable ratio of methane to oxygen is a critical selection to optimize the solid oxide fuel cells performance under internal catalytic partial oxidation reforming. In the current study, a design of experiment (DOE) with the full factorial analysis was employed to determine the optimum peak power density (PPD) as the objective function based on the flow rates as the decision variables. The response surfaces of PPD and its contour were presented in terms of the levels of the methane and oxygen flow rates. However, the low flow rate ratio of O2 to CH4 maximizes the PPD, the high risk of carbon deposition is occurred. The optimum PPD value was determined through the superposition of contour plots for regions with Reynolds (Re) number of fluid flow around 10 and O2/CH4 ratios among 0.2–0.4. The electrochemical experiment testing illustrated a stable performance of the SOFC in the optimum condition of the fuel flow rate after 120 h testing time. Furthermore, the scanning electron microscopy revealed no visible trace of carbon and crack on the anodic surface of the cell.

Suggested Citation

  • Farnak, M. & Esfahani, J.A. & Bozorgmehri, S., 2020. "An experimental design of the solid oxide fuel cell performance by using partially oxidation reforming of natural gas," Renewable Energy, Elsevier, vol. 147(P1), pages 155-163.
    • Handle: RePEc:eee:renene:v:147:y:2020:i:p1:p:155-163
    DOI: 10.1016/j.renene.2019.08.116
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119313035
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2019.08.116?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nassef, Ahmed M. & Fathy, Ahmed & Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Rezk, Hegazy & Tanveer, Waqas Hassan & Olabi, A.G., 2019. "Maximizing SOFC performance through optimal parameters identification by modern optimization algorithms," Renewable Energy, Elsevier, vol. 138(C), pages 458-464.
    2. Ramadhani, F. & Hussain, M.A. & Mokhlis, H. & Hajimolana, S., 2017. "Optimization strategies for Solid Oxide Fuel Cell (SOFC) application: A literature survey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 460-484.
    3. Akkaya, Ali Volkan & Sahin, Bahri & Erdem, Hasan Huseyin, 2009. "Thermodynamic model for exergetic performance of a tubular SOFC module," Renewable Energy, Elsevier, vol. 34(7), pages 1863-1870.
    4. Cascos, V. & Fernández-Díaz, M.T. & Alonso, J.A., 2019. "Structural and electrical characterization of the novel SrCo1-xTixO3–δ (x = 0.05, 0.1 and 0.15) perovskites: Evaluation as cathode materials in solid oxide fuel cells," Renewable Energy, Elsevier, vol. 133(C), pages 205-215.
    5. Aslannejad, H. & Barelli, L. & Babaie, A. & Bozorgmehri, S., 2016. "Effect of air addition to methane on performance stability and coking over NiO–YSZ anodes of SOFC," Applied Energy, Elsevier, vol. 177(C), pages 179-186.
    6. Prodromidis, George N. & Coutelieris, Frank A., 2017. "Thermodynamic analysis of biogas fed solid oxide fuel cell power plants," Renewable Energy, Elsevier, vol. 108(C), pages 1-10.
    7. Ma, Yuyao & Ma, Yuxia & Zhao, Zhibo & Hu, Xun & Ye, Zhengmao & Yao, Jianfeng & Buckley, C.E. & Dong, Dehua, 2019. "Comparison of fibrous catalysts and monolithic catalysts for catalytic methane partial oxidation," Renewable Energy, Elsevier, vol. 138(C), pages 1010-1017.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kannan, Vishvak & Xue, Hansong & Raman, K. Ashoke & Chen, Jiasheng & Fisher, Adrian & Birgersson, Erik, 2020. "Quantifying operating uncertainties of a PEMFC – Monte Carlo-machine learning based approach," Renewable Energy, Elsevier, vol. 158(C), pages 343-359.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zapata-Ramírez, Víctor & Rosendo-Santos, Paula & Amador, Ulises & Ritter, Clemens & Mather, Glenn C. & Pérez-Coll, Domingo, 2022. "Optimisation of high-performance, cobalt-free SrFe1-xMoxO3-δ cathodes for solid oxide fuel cells prepared by spray pyrolysis," Renewable Energy, Elsevier, vol. 185(C), pages 1167-1176.
    2. Nassef, Ahmed M. & Fathy, Ahmed & Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Rezk, Hegazy & Tanveer, Waqas Hassan & Olabi, A.G., 2019. "Maximizing SOFC performance through optimal parameters identification by modern optimization algorithms," Renewable Energy, Elsevier, vol. 138(C), pages 458-464.
    3. Abdelkareem, Mohammad Ali & Tanveer, Waqas Hassan & Sayed, Enas Taha & Assad, M. El Haj & Allagui, Anis & Cha, S.W., 2019. "On the technical challenges affecting the performance of direct internal reforming biogas solid oxide fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 101(C), pages 361-375.
    4. Hesham Alhumade & Ahmed Fathy & Abdulrahim Al-Zahrani & Muhyaddin Jamal Rawa & Hegazy Rezk, 2021. "Optimal Parameter Estimation Methodology of Solid Oxide Fuel Cell Using Modern Optimization," Mathematics, MDPI, vol. 9(9), pages 1-19, May.
    5. Barelli, L. & Ottaviano, A., 2014. "Solid oxide fuel cell technology coupled with methane dry reforming: A viable option for high efficiency plant with reduced CO2 emissions," Energy, Elsevier, vol. 71(C), pages 118-129.
    6. Lv, Xiuqing & Chen, Huili & Zhou, Wei & Li, Si-Dian & Cheng, Fangqin & Shao, Zongping, 2022. "SrCo0.4Fe0.4Zr0.1Y0.1O3-δ, A new CO2 tolerant cathode for proton-conducting solid oxide fuel cells," Renewable Energy, Elsevier, vol. 185(C), pages 8-16.
    7. Kęstutis Venslauskas & Kęstutis Navickas & Marja Nappa & Petteri Kangas & Revilija Mozūraitytė & Rasa Šližytė & Vidmantas Župerka, 2021. "Energetic and Economic Evaluation of Zero-Waste Fish Co-Stream Processing," IJERPH, MDPI, vol. 18(5), pages 1-16, February.
    8. Olabi, A.G. & Wilberforce, Tabbi & Abdelkareem, Mohammad Ali, 2021. "Fuel cell application in the automotive industry and future perspective," Energy, Elsevier, vol. 214(C).
    9. Liu, Lijun & Qian, Jin & Hua, Li & Zhang, Bin, 2022. "System estimation of the SOFCs using fractional-order social network search algorithm," Energy, Elsevier, vol. 255(C).
    10. Lubov S. Skutina & Aleksey A. Vylkov & Dmitry K. Kuznetsov & Dmitry A. Medvedev & Vladimir Ya. Shur, 2019. "Tailoring Ni and Sr 2 Mg 0.25 Ni 0.75 MoO 6−δ Cermet Compositions for Designing the Fuel Electrodes of Solid Oxide Electrochemical Cells," Energies, MDPI, vol. 12(12), pages 1-11, June.
    11. Abdul Ghani Olabi & Nabila Shehata & Hussein M. Maghrabie & Lobna A. Heikal & Mohammad Ali Abdelkareem & Shek Mohammod Atiqure Rahman & Sheikh Khaleduzzaman Shah & Enas Taha Sayed, 2022. "Progress in Solar Thermal Systems and Their Role in Achieving the Sustainable Development Goals," Energies, MDPI, vol. 15(24), pages 1-31, December.
    12. Mattia Boscherini & Alba Storione & Matteo Minelli & Francesco Miccio & Ferruccio Doghieri, 2023. "New Perspectives on Catalytic Hydrogen Production by the Reforming, Partial Oxidation and Decomposition of Methane and Biogas," Energies, MDPI, vol. 16(17), pages 1-33, September.
    13. Mohamad Fairus Rabuni & Tao Li & Mohd Hafiz Dzarfan Othman & Faidzul Hakim Adnan & Kang Li, 2023. "Progress in Solid Oxide Fuel Cells with Hydrocarbon Fuels," Energies, MDPI, vol. 16(17), pages 1-36, September.
    14. Park, Joonguen & Kang, Juhyun & Bae, Joongmyeon, 2013. "Computational analysis of operating temperature, hydrogen flow rate and anode thickness in anode-supported flat-tube solid oxide fuel cells," Renewable Energy, Elsevier, vol. 54(C), pages 63-69.
    15. Enas Taha Sayed & Hegazy Rezk & Abdul Ghani Olabi & Mohamed R. Gomaa & Yahia B. Hassan & Shek Mohammad Atiqure Rahman & Sheikh Khaleduzzaman Shah & Mohammad Ali Abdelkareem, 2022. "Application of Artificial Intelligence to Improve the Thermal Energy and Exergy of Nanofluid-Based PV Thermal/Nano-Enhanced Phase Change Material," Energies, MDPI, vol. 15(22), pages 1-13, November.
    16. Denver F. Cheddie, 2010. "Integration of A Solid Oxide Fuel Cell into A 10 MW Gas Turbine Power Plant," Energies, MDPI, vol. 3(4), pages 1-16, April.
    17. Cheng, Tianliang & Jiang, Jianhua & Wu, Xiaodong & Li, Xi & Xu, Mengxue & Deng, Zhonghua & Li, Jian, 2019. "Application oriented multiple-objective optimization, analysis and comparison of solid oxide fuel cell systems with different configurations," Applied Energy, Elsevier, vol. 235(C), pages 914-929.
    18. Fathy, Ahmed & Rezk, Hegazy, 2022. "Political optimizer based approach for estimating SOFC optimal parameters for static and dynamic models," Energy, Elsevier, vol. 238(PC).
    19. Barelli, L. & Bidini, G. & Cinti, G. & Gallorini, F. & Pöniz, M., 2017. "SOFC stack coupled with dry reforming," Applied Energy, Elsevier, vol. 192(C), pages 498-507.
    20. El-Hay, E.A. & El-Hameed, M.A. & El-Fergany, A.A., 2019. "Optimized Parameters of SOFC for steady state and transient simulations using interior search algorithm," Energy, Elsevier, vol. 166(C), pages 451-461.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:147:y:2020:i:p1:p:155-163. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.