IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v116y2018ipap215-223.html
   My bibliography  Save this article

Experimental and theoretical investigation of micro wind turbine for low wind speed regions

Author

Listed:
  • Akour, Salih N.
  • Al-Heymari, Mohammed
  • Ahmed, Talha
  • Khalil, Kamel Ali

Abstract

Micro wind turbine blades for low average wind speed regions like the Arabian Peninsula, Jordan Desert and United Arab Emirates are designed and implemented. Wind profiles for two locations in UAE are investigated and utilized in the design and the economic analysis. Airfoils BW3, A18 and SG6043 are selected and utilized as candidates for designing micro turbine blades. Blade element momentum theory is used to design the blade 3D geometry. A methodology to optimize the blade geometry for average wind speed 5 m/s based on operational Reynolds number is developed and utilized. To account for the aerodynamic behavior over the 3D blade geometry, the power coefficient for the blades of each airfoil is obtained using the simulation software QBlade. Blades developed using airfoil BW3 showed the highest performance. A prototype is built using 3D printer and tested in open air environment (natural environment) to validate the simulation results. Comparison with existing commercial wind turbines according to cost and output power is carried out based on the concept of replacing wind turbines swept area with the equivalent array of micro wind turbines. The results show that the new design is more cost-effective and more wind energy is harnessed using equivalent swept area.

Suggested Citation

  • Akour, Salih N. & Al-Heymari, Mohammed & Ahmed, Talha & Khalil, Kamel Ali, 2018. "Experimental and theoretical investigation of micro wind turbine for low wind speed regions," Renewable Energy, Elsevier, vol. 116(PA), pages 215-223.
  • Handle: RePEc:eee:renene:v:116:y:2018:i:pa:p:215-223
    DOI: 10.1016/j.renene.2017.09.076
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148117309461
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2017.09.076?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hae Gwang Jeong & Ro Hak Seung & Kyo Beum Lee, 2012. "An Improved Maximum Power Point Tracking Method for Wind Power Systems," Energies, MDPI, vol. 5(5), pages 1-16, May.
    2. Gutierrez, José E. & Zamora, Blas & García, Julio & Peyrau, María R., 2013. "Tool development based on FAST for performing design optimization of offshore wind turbines: FASTLognoter," Renewable Energy, Elsevier, vol. 55(C), pages 69-78.
    3. Ying Zhu & Ming Cheng & Wei Hua & Wei Wang, 2012. "A Novel Maximum Power Point Tracking Control for Permanent Magnet Direct Drive Wind Energy Conversion Systems," Energies, MDPI, vol. 5(5), pages 1-15, May.
    4. Islam, M.R. & Saidur, R. & Rahim, N.A., 2011. "Assessment of wind energy potentiality at Kudat and Labuan, Malaysia using Weibull distribution function," Energy, Elsevier, vol. 36(2), pages 985-992.
    5. ., 2016. "Horizontal M&As," Chapters, in: Merger and Acquisition Strategies, chapter 5, pages 70-90, Edward Elgar Publishing.
    6. Hans T. W. Frankort & John Hagedoorn & Wilko Letterie, 2016. "Learning horizon and optimal alliance formation," Computational and Mathematical Organization Theory, Springer, vol. 22(2), pages 212-236, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yilmaz, Oktay, 2023. "Low-speed, low induction multi-blade rotor for energy efficient small wind turbines," Energy, Elsevier, vol. 282(C).
    2. Karabacak, Murat, 2019. "A new perturb and observe based higher order sliding mode MPPT control of wind turbines eliminating the rotor inertial effect," Renewable Energy, Elsevier, vol. 133(C), pages 807-827.
    3. Meng, Jiayao & Dai, Kaoshan & Zhao, Zhi & Mao, Zhenxi & Camara, Alfredo & Zhang, Songhan & Mei, Zhu, 2020. "Study on the aerodynamic damping for the seismic analysis of wind turbines in operation," Renewable Energy, Elsevier, vol. 159(C), pages 1224-1242.
    4. Chu, Yung-Jeh & Lam, Heung-Fai, 2020. "Comparative study of the performances of a bio-inspired flexible-bladed wind turbine and a rigid-bladed wind turbine in centimeter-scale," Energy, Elsevier, vol. 213(C).
    5. Diego Francisco Larios & Enrique Personal & Antonio Parejo & Sebastián García & Antonio García & Carlos Leon, 2020. "Operational Simulation Environment for SCADA Integration of Renewable Resources," Energies, MDPI, vol. 13(6), pages 1-37, March.
    6. Sikandar Khan, 2023. "A Modeling Study Focused on Improving the Aerodynamic Performance of a Small Horizontal Axis Wind Turbine," Sustainability, MDPI, vol. 15(6), pages 1-15, March.
    7. Dallatu Abbas Umar & Chong Tak Yaw & Siaw Paw Koh & Sieh Kiong Tiong & Ammar Ahmed Alkahtani & Talal Yusaf, 2022. "Design and Optimization of a Small-Scale Horizontal Axis Wind Turbine Blade for Energy Harvesting at Low Wind Profile Areas," Energies, MDPI, vol. 15(9), pages 1-22, April.
    8. Corneliu Marinescu, 2022. "Progress in the Development and Implementation of Residential EV Charging Stations Based on Renewable Energy Sources," Energies, MDPI, vol. 16(1), pages 1-31, December.
    9. Yossri, W. & Ben Ayed, S. & Abdelkefi, A., 2023. "Evaluation of the efficiency of bioinspired blade designs for low-speed small-scale wind turbines with the presence of inflow turbulence effects," Energy, Elsevier, vol. 273(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Emejeamara, F.C. & Tomlin, A.S. & Millward-Hopkins, J.T., 2015. "Urban wind: Characterisation of useful gust and energy capture," Renewable Energy, Elsevier, vol. 81(C), pages 162-172.
    2. Tania García-Sánchez & Arbinda Kumar Mishra & Elías Hurtado-Pérez & Rubén Puché-Panadero & Ana Fernández-Guillamón, 2020. "A Controller for Optimum Electrical Power Extraction from a Small Grid-Interconnected Wind Turbine," Energies, MDPI, vol. 13(21), pages 1-16, November.
    3. Héctor Zazo & Esteban Del Castillo & Jean François Reynaud & Ramon Leyva, 2012. "MPPT for Photovoltaic Modules via Newton-Like Extremum Seeking Control," Energies, MDPI, vol. 5(8), pages 1-15, July.
    4. Bo Li & Wenhu Tang & Kaishun Xiahou & Qinghua Wu, 2017. "Development of Novel Robust Regulator for Maximum Wind Energy Extraction Based upon Perturbation and Observation," Energies, MDPI, vol. 10(4), pages 1-21, April.
    5. Tripathi, S.M. & Tiwari, A.N. & Singh, Deependra, 2015. "Grid-integrated permanent magnet synchronous generator based wind energy conversion systems: A technology review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1288-1305.
    6. Fazelpour, Farivar & Markarian, Elin & Soltani, Nima, 2017. "Wind energy potential and economic assessment of four locations in Sistan and Balouchestan province in Iran," Renewable Energy, Elsevier, vol. 109(C), pages 646-667.
    7. Phan, Dinh-Chung & Yamamoto, Shigeru, 2016. "Rotor speed control of doubly fed induction generator wind turbines using adaptive maximum power point tracking," Energy, Elsevier, vol. 111(C), pages 377-388.
    8. Nor, Khalid Mohamed & Shaaban, Mohamed & Abdul Rahman, Hasimah, 2014. "Feasibility assessment of wind energy resources in Malaysia based on NWP models," Renewable Energy, Elsevier, vol. 62(C), pages 147-154.
    9. Amr Khaled Khamees & Almoataz Y. Abdelaziz & Makram R. Eskaros & Mahmoud A. Attia & Mariam A. Sameh, 2022. "Optimal Power Flow with Stochastic Renewable Energy Using Three Mixture Component Distribution Functions," Sustainability, MDPI, vol. 15(1), pages 1-21, December.
    10. J. Wang, 2016. "Reviews of seismicity around Taiwan: Weibull distribution," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 80(3), pages 1651-1668, February.
    11. Yi Zhang & Hexu Sun & Yingjun Guo, 2020. "Integration Design and Operation Strategy of Multi-Energy Hybrid System Including Renewable Energies, Batteries and Hydrogen," Energies, MDPI, vol. 13(20), pages 1-25, October.
    12. Lopez-Pavon, Carlos & Souto-Iglesias, Antonio, 2015. "Hydrodynamic coefficients and pressure loads on heave plates for semi-submersible floating offshore wind turbines: A comparative analysis using large scale models," Renewable Energy, Elsevier, vol. 81(C), pages 864-881.
    13. Lidong Zhang & Qikai Li & Yuanjun Guo & Zhile Yang & Lei Zhang, 2018. "An Investigation of Wind Direction and Speed in a Featured Wind Farm Using Joint Probability Distribution Methods," Sustainability, MDPI, vol. 10(12), pages 1-15, November.
    14. Das, Himadry Shekhar & Tan, Chee Wei & Yatim, A.H.M. & Lau, Kwan Yiew, 2017. "Feasibility analysis of hybrid photovoltaic/battery/fuel cell energy system for an indigenous residence in East Malaysia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 1332-1347.
    15. Ho, Lip-Wah, 2016. "Wind energy in Malaysia: Past, present and future," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 279-295.
    16. Zhao, Xuejing & Wang, Chen & Su, Jinxia & Wang, Jianzhou, 2019. "Research and application based on the swarm intelligence algorithm and artificial intelligence for wind farm decision system," Renewable Energy, Elsevier, vol. 134(C), pages 681-697.
    17. Varadharajan Sankaralingam Sriraja Balaguru & Nesamony Jothi Swaroopan & Kannadasan Raju & Mohammed H. Alsharif & Mun-Kyeom Kim, 2021. "Techno-Economic Investigation of Wind Energy Potential in Selected Sites with Uncertainty Factors," Sustainability, MDPI, vol. 13(4), pages 1-31, February.
    18. Chang, Tian-Pau & Liu, Feng-Jiao & Ko, Hong-Hsi & Cheng, Shih-Ping & Sun, Li-Chung & Kuo, Shye-Chorng, 2014. "Comparative analysis on power curve models of wind turbine generator in estimating capacity factor," Energy, Elsevier, vol. 73(C), pages 88-95.
    19. Bagci, Kubra & Arslan, Talha & Celik, H. Eray, 2021. "Inverted Kumarswamy distribution for modeling the wind speed data: Lake Van, Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    20. Kang, Dongbum & Ko, Kyungnam & Huh, Jongchul, 2015. "Determination of extreme wind values using the Gumbel distribution," Energy, Elsevier, vol. 86(C), pages 51-58.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:116:y:2018:i:pa:p:215-223. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.