IDEAS home Printed from https://ideas.repec.org/a/taf/tprsxx/v55y2017i23p7000-7021.html
   My bibliography  Save this article

Multi-objective design optimisation of repairable -out-of- subsystems in series with redundant dependency

Author

Listed:
  • Milia Habib
  • Farouk Yalaoui
  • Hicham Chehade
  • Iman Jarkass
  • Nazir Chebbo

Abstract

Several researches have been investigated on Multi-Objective Redundancy Allocation Problems (MORAPs), but none of them have considered the redundant dependency at the design stage. This latter which is a special kind of failure dependency can affect significantly the system performance. Due to this fact, this paper deals with the multi-objective system design optimisation with dependent components by focusing on two objectives: maximisation of system availability and minimisation of system cost with components choice and weight constraints. A system consisting of many k-out-of-n repairable subsystems connected in series is considered. The components of a subsystem are supposed to be identical and may be dependent. They are selected from a set of available component types. In addition to the redundancy level and the number of repair teams allocated to each subsystem, the choice of components type and the dependency level are also considered as decision variables. Since the described problem is NP hard, we propose three multi-objective meta-heuristic algorithms based on Non-dominated Sorting Genetic Algorithm (NSGA II) and Strength Pareto Evolutionary Algorithm (SPEA II) with different constraints handling. An exact method is also applied. To analyse their performances, numerical applications are provided and comparisons based on different well-known metrics are presented.

Suggested Citation

  • Milia Habib & Farouk Yalaoui & Hicham Chehade & Iman Jarkass & Nazir Chebbo, 2017. "Multi-objective design optimisation of repairable -out-of- subsystems in series with redundant dependency," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 7000-7021, December.
    • Handle: RePEc:taf:tprsxx:v:55:y:2017:i:23:p:7000-7021
    DOI: 10.1080/00207543.2017.1346319
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1080/00207543.2017.1346319
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1080/00207543.2017.1346319?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zied Hajej & Nidhal Rezg & Ali Gharbi, 2017. "Improved preventive maintenance in the framework of forecasting problem under subcontractor constraint," International Journal of Production Research, Taylor & Francis Journals, vol. 55(16), pages 4557-4600, August.
    2. He Huang & Ting Xie, 2015. "Reliability improvement and production decision under Cournot competition," International Journal of Production Research, Taylor & Francis Journals, vol. 53(15), pages 4754-4768, August.
    3. Safari, Jalal, 2012. "Multi-objective reliability optimization of series-parallel systems with a choice of redundancy strategies," Reliability Engineering and System Safety, Elsevier, vol. 108(C), pages 10-20.
    4. Yu, Haiyang & Chu, Chengbin & Châtelet, Ėric & Yalaoui, Farouk, 2007. "Reliability optimization of a redundant system with failure dependencies," Reliability Engineering and System Safety, Elsevier, vol. 92(12), pages 1627-1634.
    5. Mohamed Noomane Darghouth & Anis Chelbi & Daoud Ait-kadi, 2017. "Investigating reliability improvement of second-hand production equipment considering warranty and preventive maintenance strategies," International Journal of Production Research, Taylor & Francis Journals, vol. 55(16), pages 4643-4661, August.
    6. Alikar, Najmeh & Mousavi, Seyed Mohsen & Raja Ghazilla, Raja Ariffin & Tavana, Madjid & Olugu, Ezutah Udoncy, 2017. "Application of the NSGA-II algorithm to a multi-period inventory-redundancy allocation problem in a series-parallel system," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 1-10.
    7. Attar, Ahmad & Raissi, Sadigh & Khalili-Damghani, Kaveh, 2017. "A simulation-based optimization approach for free distributed repairable multi-state availability-redundancy allocation problems," Reliability Engineering and System Safety, Elsevier, vol. 157(C), pages 177-191.
    8. Zhang, Enze & Chen, Qingwei, 2016. "Multi-objective reliability redundancy allocation in an interval environment using particle swarm optimization," Reliability Engineering and System Safety, Elsevier, vol. 145(C), pages 83-92.
    9. Dongjin Lee & Rong Pan, 2017. "Predictive maintenance of complex system with multi-level reliability structure," International Journal of Production Research, Taylor & Francis Journals, vol. 55(16), pages 4785-4801, August.
    10. Nourelfath, Mustapha & Ait-Kadi, Daoud, 2007. "Optimization of series–parallel multi-state systems under maintenance policies," Reliability Engineering and System Safety, Elsevier, vol. 92(12), pages 1620-1626.
    11. Lai, Chyh-Ming & Yeh, Wei-Chang, 2016. "Two-stage simplified swarm optimization for the redundancy allocation problem in a multi-state bridge system," Reliability Engineering and System Safety, Elsevier, vol. 156(C), pages 148-158.
    12. Kumar, Ranjan & Izui, Kazuhiro & Yoshimura, Masataka & Nishiwaki, Shinji, 2009. "Multi-objective hierarchical genetic algorithms for multilevel redundancy allocation optimization," Reliability Engineering and System Safety, Elsevier, vol. 94(4), pages 891-904.
    13. Paul H. Kvam & Edsel A. Pena, 2005. "Estimating Load-Sharing Properties in a Dynamic Reliability System," Journal of the American Statistical Association, American Statistical Association, vol. 100, pages 262-272, March.
    14. Kayedpour, Farjam & Amiri, Maghsoud & Rafizadeh, Mahmoud & Shahryari Nia, Arash, 2017. "Multi-objective redundancy allocation problem for a system with repairable components considering instantaneous availability and strategy selection," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 11-20.
    15. Bin Liu & Min Xie & Way Kuo, 2016. "Reliability modeling and preventive maintenance of load-sharing systemswith degrading components," IISE Transactions, Taylor & Francis Journals, vol. 48(8), pages 699-709, August.
    16. J.N. Roul & K. Maity & S. Kar & M. Maiti, 2015. "Multi-item reliability dependent imperfect production inventory optimal control models with dynamic demand under uncertain resource constraint," International Journal of Production Research, Taylor & Francis Journals, vol. 53(16), pages 4993-5016, August.
    17. Yihai He & Linbo Wang & Zhenzhen He & Xun Xiao, 2016. "Modelling infant failure rate of electromechanical products with multilayered quality variations from manufacturing process," International Journal of Production Research, Taylor & Francis Journals, vol. 54(21), pages 6594-6612, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chunhui Guo & Chuan Lyu & Jiayu Chen & Dong Zhou, 2018. "A multi-event combination maintenance model based on event correlation," PLOS ONE, Public Library of Science, vol. 13(11), pages 1-24, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Du, Mengyu & Li, Yan-Fu, 2020. "An investigation of new local search strategies in memetic algorithm for redundancy allocation in multi-state series-parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    2. Abouei Ardakan, Mostafa & Rezvan, Mohammad Taghi, 2018. "Multi-objective optimization of reliability–redundancy allocation problem with cold-standby strategy using NSGA-II," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 225-238.
    3. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    4. de Paula, Cassio Pereira & Visnadi, Lais Bittencourt & de Castro, Helio Fiori, 2019. "Multi-objective optimization in redundant system considering load sharing," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 17-27.
    5. Jiangbin Zhao & Shubin Si & Zhiqiang Cai & Ming Su & Wei Wang, 2019. "Multiobjective optimization of reliability–redundancy allocation problems for serial parallel-series systems based on importance measure," Journal of Risk and Reliability, , vol. 233(5), pages 881-897, October.
    6. Andrés Cacereño & David Greiner & Blas J. Galván, 2021. "Multi-Objective Optimum Design and Maintenance of Safety Systems: An In-Depth Comparison Study Including Encoding and Scheduling Aspects with NSGA-II," Mathematics, MDPI, vol. 9(15), pages 1-39, July.
    7. Gholinezhad, Hadi & Zeinal Hamadani, Ali, 2017. "A new model for the redundancy allocation problem with component mixing and mixed redundancy strategy," Reliability Engineering and System Safety, Elsevier, vol. 164(C), pages 66-73.
    8. Nath, Rahul & Muhuri, Pranab K., 2022. "Evolutionary Optimization based Solution approaches for Many Objective Reliability-Redundancy Allocation Problem," Reliability Engineering and System Safety, Elsevier, vol. 220(C).
    9. Sharifi, Mani & Taghipour, Sharareh, 2024. "Redundancy allocation problem with a mix of components for a multi-state system and continuous performance level components," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    10. Brown, Bodunrin & Liu, Bin & McIntyre, Stuart & Revie, Matthew, 2022. "Reliability analysis of load-sharing systems with spatial dependence and proximity effects," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    11. Guilani, Pedram Pourkarim & Azimi, Parham & Niaki, S.T.A. & Niaki, Seyed Armin Akhavan, 2016. "Redundancy allocation problem of a system with increasing failure rates of components based on Weibull distribution: A simulation-based optimization approach," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 187-196.
    12. Zhang, Nan & Fouladirad, Mitra & Barros, Anne, 2017. "Maintenance analysis of a two-component load-sharing system," Reliability Engineering and System Safety, Elsevier, vol. 167(C), pages 67-74.
    13. Behzad Karimi & Seyed Taghi Akhavan Niaki & Seyyed Masih Miriha & Mahsa Ghare Hasanluo & Shima Javanmard, 2019. "A weighted K-means clustering approach to solve the redundancy allocation problem of systems having components with different failures," Journal of Risk and Reliability, , vol. 233(6), pages 925-942, December.
    14. Pradip Kundu, 2021. "A multi-objective reliability-redundancy allocation problem with active redundancy and interval type-2 fuzzy parameters," Operational Research, Springer, vol. 21(4), pages 2433-2458, December.
    15. Cao, Ran & Coit, David W. & Hou, Wei & Yang, Yushu, 2020. "Game theory based solution selection for multi-objective redundancy allocation in interval-valued problem parameters," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    16. Feizabadi, Mohammad & Jahromi, Abdolhamid Eshraghniaye, 2017. "A new model for reliability optimization of series-parallel systems with non-homogeneous components," Reliability Engineering and System Safety, Elsevier, vol. 157(C), pages 101-112.
    17. Gholinezhad, Hadi, 2024. "A new model for reliability redundancy allocation problem with component mixing," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    18. Zhao, Xian & Li, Ziyue & Wang, Xiaoyue & Guo, Bin, 2023. "Reliability of performance-based system containing multiple load-sharing subsystems with protective devices considering protection randomness," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    19. Zhang, Jianchun & Zhao, Yu & Ma, Xiaobing, 2019. "A new reliability analysis method for load-sharing k-out-of-n: F system based on load-strength model," Reliability Engineering and System Safety, Elsevier, vol. 182(C), pages 152-165.
    20. Muhuri, Pranab K. & Nath, Rahul, 2019. "A novel evolutionary algorithmic solution approach for bilevel reliability-redundancy allocation problem," Reliability Engineering and System Safety, Elsevier, vol. 191(C).

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:taf:tprsxx:v:55:y:2017:i:23:p:7000-7021. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Longhurst (email available below). General contact details of provider: http://www.tandfonline.com/TPRS20 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.