IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v127y2017icp246-255.html
   My bibliography  Save this article

Environmental impact assessment of six starch plastics focusing on wastewater-derived starch and additives

Author

Listed:
  • Broeren, Martijn L.M.
  • Kuling, Lody
  • Worrell, Ernst
  • Shen, Li

Abstract

Starch plastics are developed for their biobased origin and potential biodegradability. To assist the development of sustainable starch plastics, this paper quantifies the environmental impacts of starch plastics produced from either virgin starch or starch reclaimed from wastewater. A cradle-to-factory gate life cycle assessment is conducted for six different starch plastic compositions, which include representative amounts of additives such as compatibilisers. Starch plastics are shown to enable reductions in greenhouse gas (GHG) emissions and non-renewable energy use (NREU), but have higher eutrophication potential and require more agricultural land use compared to common petrochemical plastics. The GHG emissions savings are strongly influenced by the plastic’s composition, with some grades offering an 85% reduction and others an 80% increase compared to the petrochemical counterpart (on a same weight-basis). Additives can account for up to 40% of the GHG emissions of starch plastics. The highest GHG savings are obtained when components such as PBAT and PBS are minimised, while starch, natural fibres and mineral fillers are maximised. Using reclaimed starch instead of virgin starch leads to modest decreases in NREU and GHG emissions (<10% in most cases), but up to 60% reductions in eutrophication and agricultural land use.

Suggested Citation

  • Broeren, Martijn L.M. & Kuling, Lody & Worrell, Ernst & Shen, Li, 2017. "Environmental impact assessment of six starch plastics focusing on wastewater-derived starch and additives," Resources, Conservation & Recycling, Elsevier, vol. 127(C), pages 246-255.
    • Handle: RePEc:eee:recore:v:127:y:2017:i:c:p:246-255
    DOI: 10.1016/j.resconrec.2017.09.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344917302793
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2017.09.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Martin Weiss & Juliane Haufe & Michael Carus & Miguel Brandão & Stefan Bringezu & Barbara Hermann & Martin K. Patel, 2012. "A Review of the Environmental Impacts of Biobased Materials," Journal of Industrial Ecology, Yale University, vol. 16(s1), pages 169-181, April.
    2. Veronika Dornburg & Iris Lewandowski & Martin Patel, 2003. "Comparing the Land Requirements, Energy Savings, and Greenhouse Gas Emissions Reduction of Biobased Polymers and Bioenergy," Journal of Industrial Ecology, Yale University, vol. 7(3‐4), pages 93-116, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Beata Michaliszyn-Gabryś & Janusz Krupanek & Mariusz Kalisz & Jonathan Smith, 2022. "Challenges for Sustainability in Packaging of Fresh Vegetables in Organic Farming," Sustainability, MDPI, vol. 14(9), pages 1-29, April.
    2. Aarsha Surendren & Yusra Hasan & Amar K. Mohanty & Bassim Abbassi & Manjusri Misra, 2024. "Comparative Environmental Life Cycle Assessment on Corn Starch Plasticization and Co-Plasticization Processes," Sustainability, MDPI, vol. 16(17), pages 1-13, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Anja Hansen & Jörn Budde & Annette Prochnow, 2016. "Resource Usage Strategies and Trade-Offs between Cropland Demand, Fossil Fuel Consumption, and Greenhouse Gas Emissions—Building Insulation as an Example," Sustainability, MDPI, vol. 8(7), pages 1-24, June.
    2. Amy Fitzgerald & Will Proud & Ali Kandemir & Richard J. Murphy & David A. Jesson & Richard S. Trask & Ian Hamerton & Marco L. Longana, 2021. "A Life Cycle Engineering Perspective on Biocomposites as a Solution for a Sustainable Recovery," Sustainability, MDPI, vol. 13(3), pages 1-25, January.
    3. Sarah Schmidt & David Laner, 2023. "The environmental performance of plastic packaging waste management in Germany: Current and future key factors," Journal of Industrial Ecology, Yale University, vol. 27(6), pages 1447-1460, December.
    4. Korhonen, Jouni & Honkasalo, Antero & Seppälä, Jyri, 2018. "Circular Economy: The Concept and its Limitations," Ecological Economics, Elsevier, vol. 143(C), pages 37-46.
    5. Emilia Jankowska & Miranda R. Gorman & Chad J. Frischmann, 2022. "Transforming the Plastic Production System Presents Opportunities to Tackle the Climate Crisis," Sustainability, MDPI, vol. 14(11), pages 1-18, May.
    6. Sebastian Lubjuhn & Sandra Venghaus, 2024. "Unlocking the potential of the bioeconomy for climate change reduction: The optimal use of lignocellulosic biomass in Germany," Journal of Industrial Ecology, Yale University, vol. 28(1), pages 144-159, February.
    7. Gerssen-Gondelach, S.J. & Saygin, D. & Wicke, B. & Patel, M.K. & Faaij, A.P.C., 2014. "Competing uses of biomass: Assessment and comparison of the performance of bio-based heat, power, fuels and materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 964-998.
    8. Meeks, Diana & Hottle, Troy & Bilec, M.M. & Landis, A.E., 2015. "Compostable biopolymer use in the real world: Stakeholder interviews to better understand the motivations and realities of use and disposal in the US," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 134-142.
    9. Kevin Joseph Dillman & Áróra Árnadóttir & Jukka Heinonen & Michał Czepkiewicz & Brynhildur Davíðsdóttir, 2020. "Review and Meta-Analysis of EVs: Embodied Emissions and Environmental Breakeven," Sustainability, MDPI, vol. 12(22), pages 1-28, November.
    10. Saygin, D. & Gielen, D.J. & Draeck, M. & Worrell, E. & Patel, M.K., 2014. "Assessment of the technical and economic potentials of biomass use for the production of steam, chemicals and polymers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 1153-1167.
    11. Hottle, Troy A. & Bilec, Melissa M. & Landis, Amy E., 2017. "Biopolymer production and end of life comparisons using life cycle assessment," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 295-306.
    12. Pawelzik, P. & Carus, M. & Hotchkiss, J. & Narayan, R. & Selke, S. & Wellisch, M. & Weiss, M. & Wicke, B. & Patel, M.K., 2013. "Critical aspects in the life cycle assessment (LCA) of bio-based materials – Reviewing methodologies and deriving recommendations," Resources, Conservation & Recycling, Elsevier, vol. 73(C), pages 211-228.
    13. Albers, Ariane & Collet, Pierre & Lorne, Daphné & Benoist, Anthony & Hélias, Arnaud, 2019. "Coupling partial-equilibrium and dynamic biogenic carbon models to assess future transport scenarios in France," Applied Energy, Elsevier, vol. 239(C), pages 316-330.
    14. Dornburg, V. & Faaij, A. & Patel, M. & Turkenburg, W.C., 2006. "Economics and GHG emission reduction of a PLA bio-refinery system—Combining bottom-up analysis with price elasticity effects," Resources, Conservation & Recycling, Elsevier, vol. 46(4), pages 377-409.
    15. Naiara Cañado & Erlantz Lizundia & Ortzi Akizu‐Gardoki & Rikardo Minguez & Blanca Lekube & Alex Arrillaga & Maider Iturrondobeitia, 2022. "3D printing to enable the reuse of marine plastic waste with reduced environmental impacts," Journal of Industrial Ecology, Yale University, vol. 26(6), pages 2092-2107, December.
    16. Beike Sumfleth & Stefan Majer & Daniela Thrän, 2020. "Recent Developments in Low iLUC Policies and Certification in the EU Biobased Economy," Sustainability, MDPI, vol. 12(19), pages 1-34, October.
    17. Raphael Asada & Tamás Krisztin & Fulvio di Fulvio & Florian Kraxner & Tobias Stern, 2020. "Bioeconomic transition?: Projecting consumption‐based biomass and fossil material flows to 2050," Journal of Industrial Ecology, Yale University, vol. 24(5), pages 1059-1073, October.
    18. Johann Wackerbauer & Tilmann Rave & Lara Dammer & Stephan Piotrowski & Wiebke Jander & Philipp Grundmann & Sven Wydra & Ulrich Schmoch, 2019. "Determination of Economic Indicators and Indicators for Monitoring the Progress of the Bio-Economy," ifo Forschungsberichte, ifo Institute - Leibniz Institute for Economic Research at the University of Munich, number 104, November.
    19. Pannicke, Nadine & Gawe, Erik & Hagemann, Nina & Purkus, Alexandra & Strunz, Sebastian, 2015. "The Political Economy of Fostering a Wood-based Bioeconomy in Germany," German Journal of Agricultural Economics, Humboldt-Universitaet zu Berlin, Department for Agricultural Economics, vol. 64(04), December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:127:y:2017:i:c:p:246-255. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.