IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v147y2014ipap46-52.html
   My bibliography  Save this article

Impact of unit load size on in-plant materials supply efficiency

Author

Listed:
  • Hanson, Robin
  • Finnsgård, Christian

Abstract

The unit loads, e.g., plastic containers or EUR-pallets, used in an assembly plant can have a significant impact on time efficiency, and hence cost, of both the materials supply and the receiving assembly stations. Smaller unit loads can reduce the time the assemblers spend fetching parts. However, larger unit loads result in fewer moves for a given volume of materials, which implies efficient in-plant materials supply. The current paper explores how the time efficiency of in-plant materials supply is affected by the size of unit loads. Based on the case study, it is clear that the efficiency of the in-plant materials supply is not proportional to the size of the unit loads. There are fundamental differences between how large pallets, compared to smaller unit loads, are delivered, meaning that the increased delivery frequency required for smaller unit loads does not necessarily result in an increased man-hour consumption.

Suggested Citation

  • Hanson, Robin & Finnsgård, Christian, 2014. "Impact of unit load size on in-plant materials supply efficiency," International Journal of Production Economics, Elsevier, vol. 147(PA), pages 46-52.
    • Handle: RePEc:eee:proeco:v:147:y:2014:i:pa:p:46-52
    DOI: 10.1016/j.ijpe.2012.08.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527312003416
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2012.08.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Battini, Daria & Faccio, Maurizio & Persona, Alessandro & Sgarbossa, Fabio, 2009. "Design of the optimal feeding policy in an assembly system," International Journal of Production Economics, Elsevier, vol. 121(1), pages 233-254, September.
    2. Bozer, Yavuz A. & McGinnis, Leon F., 1992. "Kitting versus line stocking: A conceptual framework and a descriptive model," International Journal of Production Economics, Elsevier, vol. 28(1), pages 1-19, November.
    3. Boysen, Nils & Fliedner, Malte & Scholl, Armin, 2009. "Sequencing mixed-model assembly lines: Survey, classification and model critique," European Journal of Operational Research, Elsevier, vol. 192(2), pages 349-373, January.
    4. Emde, Simon & Boysen, Nils, 2012. "Optimally locating in-house logistics areas to facilitate JIT-supply of mixed-model assembly lines," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 79445, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    5. Emde, Simon & Boysen, Nils, 2012. "Optimally routing and scheduling tow trains for JIT-supply of mixed-model assembly lines," European Journal of Operational Research, Elsevier, vol. 217(2), pages 287-299.
    6. Egbelu, Pius J., 1993. "Concurrent specification of unit load sizes and automated guided vehicle fleet size in manufacturing system," International Journal of Production Economics, Elsevier, vol. 29(1), pages 49-64, February.
    7. Bonney, M. C. & Zhang, Zongmao & Head, M. A. & Tien, C. C. & Barson, R. J., 1999. "Are push and pull systems really so different?," International Journal of Production Economics, Elsevier, vol. 59(1-3), pages 53-64, March.
    8. Lage Junior, Muris & Godinho Filho, Moacir, 2010. "Variations of the kanban system: Literature review and classification," International Journal of Production Economics, Elsevier, vol. 125(1), pages 13-21, May.
    9. Emde, Simon & Boysen, Nils, 2012. "Optimally locating in-house logistics areas to facilitate JIT-supply of mixed-model assembly lines," International Journal of Production Economics, Elsevier, vol. 135(1), pages 393-402.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alcaraz, Juan J. & Caballero-Arnaldos, Luis & Vales-Alonso, Javier, 2019. "Rich vehicle routing problem with last-mile outsourcing decisions," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 129(C), pages 263-286.
    2. Pawel Zajac & Egidijus Dragasius & Tetiana Roik, 2021. "Energy Consumption When Transporting Pallet Loads Using a Forklift with an Anti Slip Pad Preventing Damage," Energies, MDPI, vol. 14(24), pages 1-20, December.
    3. Schmid, Nico André & Limère, Veronique & Raa, Birger, 2021. "Mixed model assembly line feeding with discrete location assignments and variable station space," Omega, Elsevier, vol. 102(C).
    4. McDonald, Conor M., 2016. "Integrating packaging and supply chain decisions: Selection of economic handling unit quantities," International Journal of Production Economics, Elsevier, vol. 180(C), pages 208-221.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Boysen, Nils & Emde, Simon & Hoeck, Michael & Kauderer, Markus, 2015. "Part logistics in the automotive industry: Decision problems, literature review and research agenda," European Journal of Operational Research, Elsevier, vol. 242(1), pages 107-120.
    2. Sternatz, Johannes, 2015. "The joint line balancing and material supply problem," International Journal of Production Economics, Elsevier, vol. 159(C), pages 304-318.
    3. Daria Battini & Nils Boysen & Simon Emde, 2013. "Just-in-Time supermarkets for part supply in the automobile industry," Metrika: International Journal for Theoretical and Applied Statistics, Springer, vol. 24(2), pages 209-217, July.
    4. Emde, Simon & Gendreau, Michel, 2017. "Scheduling in-house transport vehicles to feed parts to automotive assembly lines," European Journal of Operational Research, Elsevier, vol. 260(1), pages 255-267.
    5. Masood Fathi & Morteza Ghobakhloo, 2020. "Enabling Mass Customization and Manufacturing Sustainability in Industry 4.0 Context: A Novel Heuristic Algorithm for in-Plant Material Supply Optimization," Sustainability, MDPI, vol. 12(16), pages 1-15, August.
    6. Simon Emde & Lukas Polten, 2019. "Sequencing assembly lines to facilitate synchronized just-in-time part supply," Journal of Scheduling, Springer, vol. 22(6), pages 607-621, December.
    7. Diefenbach, Heiko & Emde, Simon & Glock, Christoph H., 2020. "Loading tow trains ergonomically for just-in-time part supply," European Journal of Operational Research, Elsevier, vol. 284(1), pages 325-344.
    8. C. Briand & Y. He & S. U. Ngueveu, 2018. "Energy-efficient planning for supplying assembly lines with vehicles," EURO Journal on Transportation and Logistics, Springer;EURO - The Association of European Operational Research Societies, vol. 7(4), pages 387-414, December.
    9. Boysen, Nils & Emde, Simon, 2014. "Scheduling the part supply of mixed-model assembly lines in line-integrated supermarkets," European Journal of Operational Research, Elsevier, vol. 239(3), pages 820-829.
    10. Maurizio Faccio & Mauro Gamberi & Alessandro Persona & Alberto Regattieri & Fabio Sgarbossa, 2013. "Design and simulation of assembly line feeding systems in the automotive sector using supermarket, kanbans and tow trains: a general framework," Metrika: International Journal for Theoretical and Applied Statistics, Springer, vol. 24(2), pages 187-208, July.
    11. Adenipekun, Ebenezer Olatunde & Limère, Veronique & Schmid, Nico André, 2022. "The impact of transportation optimisation on assembly line feeding," Omega, Elsevier, vol. 107(C).
    12. Schmid, Nico André & Limère, Veronique & Raa, Birger, 2021. "Mixed model assembly line feeding with discrete location assignments and variable station space," Omega, Elsevier, vol. 102(C).
    13. Mustapha Sali & Evren Sahin, 2016. "Line feeding optimization for Just in Time assembly lines: an application to the automotive industry," Post-Print hal-01265041, HAL.
    14. Boysen, Nils & Bock, Stefan, 2011. "Scheduling just-in-time part supply for mixed-model assembly lines," European Journal of Operational Research, Elsevier, vol. 211(1), pages 15-25, May.
    15. Masood Fathi & Amir Nourmohammadi & Morteza Ghobakhloo & Milad Yousefi, 2020. "Production Sustainability via Supermarket Location Optimization in Assembly Lines," Sustainability, MDPI, vol. 12(11), pages 1-15, June.
    16. Emilio Moretti & Elena Tappia & Veronique Limère & Marco Melacini, 2021. "Exploring the application of machine learning to the assembly line feeding problem," Operations Management Research, Springer, vol. 14(3), pages 403-419, December.
    17. Sali, Mustapha & Sahin, Evren, 2016. "Line feeding optimization for Just in Time assembly lines: An application to the automotive industry," International Journal of Production Economics, Elsevier, vol. 174(C), pages 54-67.
    18. Mohamed Amjath & Laoucine Kerbache & James MacGregor Smith, 2024. "A Closed Queueing Networks Approach for an Optimal Heterogeneous Fleet Size of an Inter-Facility Bulk Material Transfer System," Logistics, MDPI, vol. 8(1), pages 1-38, March.
    19. Stefan Fedtke & Nils Boysen & Patrick Schumacher, 2023. "In-line kitting for part feeding of assembly lines: workload balancing and storage assignment to reduce the workers’ walking effort," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 45(3), pages 717-758, September.
    20. Francesco Lolli & Rita Gamberini & Claudio Giberti & Bianca Rimini & Federica Bondi, 2016. "A simulative approach for evaluating alternative feeding scenarios in a kanban system," International Journal of Production Research, Taylor & Francis Journals, vol. 54(14), pages 4228-4239, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:147:y:2014:i:pa:p:46-52. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.