IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v90y2015ip1p122-127.html
   My bibliography  Save this article

Process intensification for dimethyl ether production by self-heat recuperation

Author

Listed:
  • Kansha, Yasuki
  • Ishizuka, Masanori
  • Song, Chunfeng
  • Tsutsumi, Atsushi

Abstract

DME (dimethyl ether) is categorized as a green energy source and the demand for DME continues to increase. DME is commonly produced by two methods: indirect and direct DME synthesis. In the indirect method, methanol is produced and then converted to DME. In the direct method, DME is directly synthesized from syngas without methanol production. In this research, we investigated the feasibility of self-heat recuperation technology to the DME production process using the indirect method and developed an innovative process for DME production from an energy saving point of view, thereby considerably reducing the energy consumption of the thermal and separation processes.

Suggested Citation

  • Kansha, Yasuki & Ishizuka, Masanori & Song, Chunfeng & Tsutsumi, Atsushi, 2015. "Process intensification for dimethyl ether production by self-heat recuperation," Energy, Elsevier, vol. 90(P1), pages 122-127.
    • Handle: RePEc:eee:energy:v:90:y:2015:i:p1:p:122-127
    DOI: 10.1016/j.energy.2015.05.037
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215006180
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.05.037?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhao, Yuwei & Wang, Ying & Li, Dongchang & Lei, Xiong & Liu, Shenghua, 2014. "Combustion and emission characteristics of a DME (dimethyl ether)-diesel dual fuel premixed charge compression ignition engine with EGR (exhaust gas recirculation)," Energy, Elsevier, vol. 72(C), pages 608-617.
    2. Fornell, Rickard & Berntsson, Thore & Åsblad, Anders, 2013. "Techno-economic analysis of a kraft pulp-mill-based biorefinery producing both ethanol and dimethyl ether," Energy, Elsevier, vol. 50(C), pages 83-92.
    3. Clausen, Lasse R. & Elmegaard, Brian & Ahrenfeldt, Jesper & Henriksen, Ulrik, 2011. "Thermodynamic analysis of small-scale dimethyl ether (DME) and methanol plants based on the efficient two-stage gasifier," Energy, Elsevier, vol. 36(10), pages 5805-5814.
    4. Kotani, Yui & Kansha, Yasuki & Tsutsumi, Atsushi, 2013. "Conceptual design of an active magnetic regenerative heat circulator based on self-heat recuperation technology," Energy, Elsevier, vol. 55(C), pages 127-133.
    5. Park, Su Han & Yoon, Seung Hyun & Cha, Junepyo & Lee, Chang Sik, 2014. "Mixing effects of biogas and dimethyl ether (DME) on combustion and emission characteristics of DME fueled high-speed diesel engine," Energy, Elsevier, vol. 66(C), pages 413-422.
    6. Matsuda, Kazuo & Kawazuishi, Kenichi & Kansha, Yasuki & Fushimi, Chihiro & Nagao, Masaki & Kunikiyo, Hiroshi & Masuda, Fusao & Tsutsumi, Atsushi, 2011. "Advanced energy saving in distillation process with self-heat recuperation technology," Energy, Elsevier, vol. 36(8), pages 4640-4645.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xia, Hui & Ye, Qing & Feng, Shenyao & Li, Rui & Suo, Xiaomeng, 2017. "A novel energy-saving pressure swing distillation process based on self-heat recuperation technology," Energy, Elsevier, vol. 141(C), pages 770-781.
    2. Fu, Chao & Gundersen, Truls, 2016. "Correct integration of compressors and expanders in above ambient heat exchanger networks," Energy, Elsevier, vol. 116(P2), pages 1282-1293.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mevawala, Chirag & Jiang, Yuan & Bhattacharyya, Debangsu, 2019. "Techno-economic optimization of shale gas to dimethyl ether production processes via direct and indirect synthesis routes," Applied Energy, Elsevier, vol. 238(C), pages 119-134.
    2. Loganathan, S. & Leenus Jesu Martin, M. & Nagalingam, B. & Prabhu, L., 2018. "Heat release rate and performance simulation of DME fuelled diesel engine using oxygenate correction factor and load correction factor in double Wiebe function," Energy, Elsevier, vol. 150(C), pages 77-91.
    3. Ji, Changwei & Shi, Lei & Wang, Shuofeng & Cong, Xiaoyu & Su, Teng & Yu, Menghui, 2017. "Investigation on performance of a spark-ignition engine fueled with dimethyl ether and gasoline mixtures under idle and stoichiometric conditions," Energy, Elsevier, vol. 126(C), pages 335-342.
    4. Kang, Yinhu & Wei, Shuang & Zhang, Pengyuan & Lu, Xiaofeng & Wang, Quanhai & Gou, Xiaolong & Huang, Xiaomei & Peng, Shini & Yang, Dong & Ji, Xuanyu, 2017. "Detailed multi-dimensional study on NOx formation and destruction mechanisms in dimethyl ether/air diffusion flame under the moderate or intense low-oxygen dilution (MILD) condition," Energy, Elsevier, vol. 119(C), pages 1195-1211.
    5. Chintala, V. & Subramanian, K.A., 2015. "Experimental investigations on effect of different compression ratios on enhancement of maximum hydrogen energy share in a compression ignition engine under dual-fuel mode," Energy, Elsevier, vol. 87(C), pages 448-462.
    6. Jain, Ayush & Singh, Akhilendra Pratap & Agarwal, Avinash Kumar, 2017. "Effect of split fuel injection and EGR on NOx and PM emission reduction in a low temperature combustion (LTC) mode diesel engine," Energy, Elsevier, vol. 122(C), pages 249-264.
    7. Liu, Junheng & Sun, Ping & Huang, He & Meng, Jian & Yao, Xiaohua, 2017. "Experimental investigation on performance, combustion and emission characteristics of a common-rail diesel engine fueled with polyoxymethylene dimethyl ethers-diesel blends," Applied Energy, Elsevier, vol. 202(C), pages 527-536.
    8. Kiss, Anton A. & Flores Landaeta, Servando J. & Infante Ferreira, Carlos A., 2012. "Towards energy efficient distillation technologies – Making the right choice," Energy, Elsevier, vol. 47(1), pages 531-542.
    9. Kozarac, Darko & Taritas, Ivan & Vuilleumier, David & Saxena, Samveg & Dibble, Robert W., 2016. "Experimental and numerical analysis of the performance and exhaust gas emissions of a biogas/n-heptane fueled HCCI engine," Energy, Elsevier, vol. 115(P1), pages 180-193.
    10. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    11. Kazemi, Abolghasem & Mehrabani-Zeinabad, Arjomand & Beheshti, Masoud, 2018. "Recently developed heat pump assisted distillation configurations: A comparative study," Applied Energy, Elsevier, vol. 211(C), pages 1261-1281.
    12. Clausen, Lasse R., 2017. "Energy efficient thermochemical conversion of very wet biomass to biofuels by integration of steam drying, steam electrolysis and gasification," Energy, Elsevier, vol. 125(C), pages 327-336.
    13. Fornell, Rickard & Berntsson, Thore & Åsblad, Anders, 2013. "Techno-economic analysis of a kraft pulp-mill-based biorefinery producing both ethanol and dimethyl ether," Energy, Elsevier, vol. 50(C), pages 83-92.
    14. Kayadelen, Hasan Kayhan, 2018. "A multi-featured model for estimation of thermodynamic properties, adiabatic flame temperature and equilibrium combustion products of fuels, fuel blends, surrogates and fuel additives," Energy, Elsevier, vol. 143(C), pages 241-256.
    15. Wu, Handong & Gao, Lin & Jin, Hongguang & Li, Sheng, 2017. "Low-energy-penalty principles of CO2 capture in polygeneration systems," Applied Energy, Elsevier, vol. 203(C), pages 571-581.
    16. Bidhan Bhuson Roy & Qingshi Tu, 2022. "A review of system dynamics modeling for the sustainability assessment of biorefineries," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1450-1459, August.
    17. Runge, Philipp & Sölch, Christian & Albert, Jakob & Wasserscheid, Peter & Zöttl, Gregor & Grimm, Veronika, 2019. "Economic comparison of different electric fuels for energy scenarios in 2035," Applied Energy, Elsevier, vol. 233, pages 1078-1093.
    18. Cui, Chengtian & Qi, Meng & Zhang, Xiaodong & Sun, Jinsheng & Li, Qing & Kiss, Anton A. & Wong, David Shan-Hill & Masuku, Cornelius M. & Lee, Moonyong, 2024. "Electrification of distillation for decarbonization: An overview and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    19. Nguyen Xuan Khoa & Ocktaeck Lim, 2022. "A Review of the External and Internal Residual Exhaust Gas in the Internal Combustion Engine," Energies, MDPI, vol. 15(3), pages 1-21, February.
    20. Chaudhary Awais Salman & Ch Bilal Omer, 2020. "Process Modelling and Simulation of Waste Gasification-Based Flexible Polygeneration Facilities for Power, Heat and Biofuels Production," Energies, MDPI, vol. 13(16), pages 1-22, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:90:y:2015:i:p1:p:122-127. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.