IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v43y2012i1p146-160.html
   My bibliography  Save this article

A comprehensive study of methyl decanoate pyrolysis

Author

Listed:
  • Pyl, Steven P.
  • Van Geem, Kevin M.
  • Puimège, Philip
  • Sabbe, Maarten K.
  • Reyniers, Marie-Françoise
  • Marin, Guy B.

Abstract

The thermal decomposition of methyl decanoate (MD) was studied in a bench-scale pyrolysis set-up equipped with a dedicated on-line analysis section including a GC×GC-FID/(TOF-MS). This analysis section enables quantitative and qualitative on-line analyses of the entire reactor effluent with high level of detail including measurement of formaldehyde and water. The reactor temperature was varied from 873K to 1123K at a fixed pressure of 1.7bar and a fixed residence time of 0.5s, for both high (10molN2/molMD) and low (0.6molN2/molMD) nitrogen dilution. Thus covering a wide conversion range in both dilution regimes. In these experiments, significant amounts of large linear olefins and unsaturated esters were observed at lower temperatures, the amounts of which decreased at higher temperatures in favor of permanent gasses (CO, CO2, CH4) and light olefins. At the highest temperatures more than 5wt% of mono-aromatic and poly-aromatic components were observed. The acquired dataset was used to validate 3 recently published microkinetic models which were developed to model oxidation and/or pyrolysis of methyl decanoate. The results showed that these models accurately predict the product distribution, although important discrepancies were observed for some major products such as certain unsaturated esters, CO2 and H2O. Reaction path analyses and CBS-QB3 quantum-chemical calculations are presented and discussed in order to explain the observed differences.

Suggested Citation

  • Pyl, Steven P. & Van Geem, Kevin M. & Puimège, Philip & Sabbe, Maarten K. & Reyniers, Marie-Françoise & Marin, Guy B., 2012. "A comprehensive study of methyl decanoate pyrolysis," Energy, Elsevier, vol. 43(1), pages 146-160.
    • Handle: RePEc:eee:energy:v:43:y:2012:i:1:p:146-160
    DOI: 10.1016/j.energy.2011.11.032
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211007638
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.11.032?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wander, P.R. & Altafini, C.R. & Colombo, A.L. & Perera, S.C., 2011. "Durability studies of mono-cylinder compression ignition engines operating with diesel, soy and castor oil methyl esters," Energy, Elsevier, vol. 36(6), pages 3917-3923.
    2. Haik, Yousef & Selim, Mohamed Y.E. & Abdulrehman, Tahir, 2011. "Combustion of algae oil methyl ester in an indirect injection diesel engine," Energy, Elsevier, vol. 36(3), pages 1827-1835.
    3. Muralidharan, K. & Vasudevan, D., 2011. "Performance, emission and combustion characteristics of a variable compression ratio engine using methyl esters of waste cooking oil and diesel blends," Applied Energy, Elsevier, vol. 88(11), pages 3959-3968.
    4. Satyanarayana, M. & Muraleedharan, C., 2011. "A comparative study of vegetable oil methyl esters (biodiesels)," Energy, Elsevier, vol. 36(4), pages 2129-2137.
    5. Unknown, 2005. "Forward," 2005 Conference: Slovenia in the EU - Challenges for Agriculture, Food Science and Rural Affairs, November 10-11, 2005, Moravske Toplice, Slovenia 183804, Slovenian Association of Agricultural Economists (DAES).
    6. Muralidharan, K. & Vasudevan, D. & Sheeba, K.N., 2011. "Performance, emission and combustion characteristics of biodiesel fuelled variable compression ratio engine," Energy, Elsevier, vol. 36(8), pages 5385-5393.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Chong & Zhang, Zhenpeng & He, Li & Ye, Mingzhi & Ning, Hongbo & Shang, Yanlei & Shi, Jinchun & Luo, Sheng-Nian, 2022. "Experimental and kinetic modeling study on the ignition characteristics of methyl acrylate and vinyl acetate: Effect of CC double bond," Energy, Elsevier, vol. 245(C).
    2. Chrysoula M. Michailof & Konstantinos G. Kalogiannis & Themistoklis Sfetsas & Despoina T. Patiaka & Angelos A. Lappas, 2016. "Advanced analytical techniques for bio-oil characterization," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 5(6), pages 614-639, November.
    3. Li, Chong & Ye, Mingzhi & Liu, Bo & Shang, Yanlei & Ning, Hongbo & Shi, Jinchun & Luo, Sheng-Nian, 2023. "Shock tube experiments and kinetic modeling of ignition of unsaturated C5 methyl esters," Energy, Elsevier, vol. 284(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Grana, Roberto & Frassoldati, Alessio & Cuoci, Alberto & Faravelli, Tiziano & Ranzi, Eliseo, 2012. "A wide range kinetic modeling study of pyrolysis and oxidation of methyl butanoate and methyl decanoate. Note I: Lumped kinetic model of methyl butanoate and small methyl esters," Energy, Elsevier, vol. 43(1), pages 124-139.
    2. Mahmudul, H.M. & Hagos, F.Y. & Mamat, R. & Adam, A. Abdul & Ishak, W.F.W. & Alenezi, R., 2017. "Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 497-509.
    3. Dong Lin Loo & Yew Heng Teoh & Heoy Geok How & Jun Sheng Teh & Liviu Catalin Andrei & Slađana Starčević & Farooq Sher, 2021. "Applications Characteristics of Different Biodiesel Blends in Modern Vehicles Engines: A Review," Sustainability, MDPI, vol. 13(17), pages 1-31, August.
    4. Jaichandar, S. & Thamaraikannan, M. & Yogaraj, D. & Samuelraj, D., 2019. "A comprehensive study on the effects of internal air jet piston on the performance of a JOME fueled DI diesel engine," Energy, Elsevier, vol. 185(C), pages 1174-1182.
    5. Arumugam, S. & Sriram, G. & Ellappan, R., 2014. "Bio-lubricant-biodiesel combination of rapeseed oil: An experimental investigation on engine oil tribology, performance, and emissions of variable compression engine," Energy, Elsevier, vol. 72(C), pages 618-627.
    6. Othman, Mohd Fahmi & Adam, Abdullah & Najafi, G. & Mamat, Rizalman, 2017. "Green fuel as alternative fuel for diesel engine: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 694-709.
    7. Jaichandar, S. & Senthil Kumar, P. & Annamalai, K., 2012. "Combined effect of injection timing and combustion chamber geometry on the performance of a biodiesel fueled diesel engine," Energy, Elsevier, vol. 47(1), pages 388-394.
    8. Tesfa, B. & Mishra, R. & Zhang, C. & Gu, F. & Ball, A.D., 2013. "Combustion and performance characteristics of CI (compression ignition) engine running with biodiesel," Energy, Elsevier, vol. 51(C), pages 101-115.
    9. Mofijur, M. & Masjuki, H.H. & Kalam, M.A. & Atabani, A.E. & Shahabuddin, M. & Palash, S.M. & Hazrat, M.A., 2013. "Effect of biodiesel from various feedstocks on combustion characteristics, engine durability and materials compatibility: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 441-455.
    10. Zheng, Zunqing & Wang, XiaoFeng & Zhong, Xiaofan & Hu, Bin & Liu, Haifeng & Yao, Mingfa, 2016. "Experimental study on the combustion and emissions fueling biodiesel/n-butanol, biodiesel/ethanol and biodiesel/2,5-dimethylfuran on a diesel engine," Energy, Elsevier, vol. 115(P1), pages 539-549.
    11. Gonca, Guven & Dobrucali, Erinc, 2016. "Theoretical and experimental study on the performance of a diesel engine fueled with diesel–biodiesel blends," Renewable Energy, Elsevier, vol. 93(C), pages 658-666.
    12. Teoh, Y.H. & How, H.G. & Masjuki, H.H. & Nguyen, H.-T. & Kalam, M.A. & Alabdulkarem, A., 2019. "Investigation on particulate emissions and combustion characteristics of a common-rail diesel engine fueled with Moringa oleifera biodiesel-diesel blends," Renewable Energy, Elsevier, vol. 136(C), pages 521-534.
    13. E, Jiaqiang & Pham, MinhHieu & Deng, Yuanwang & Nguyen, Tuannghia & Duy, VinhNguyen & Le, DucHieu & Zuo, Wei & Peng, Qingguo & Zhang, Zhiqing, 2018. "Effects of injection timing and injection pressure on performance and exhaust emissions of a common rail diesel engine fueled by various concentrations of fish-oil biodiesel blends," Energy, Elsevier, vol. 149(C), pages 979-989.
    14. Hoseini, S.S. & Najafi, G. & Ghobadian, B. & Mamat, Rizalman & Sidik, Nor Azwadi Che & Azmi, W.H., 2017. "The effect of combustion management on diesel engine emissions fueled with biodiesel-diesel blends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 307-331.
    15. Kurji, H. & Valera-Medina, A. & Runyon, J. & Giles, A. & Pugh, D. & Marsh, R. & Cerone, N. & Zimbardi, F. & Valerio, V., 2016. "Combustion characteristics of biodiesel saturated with pyrolysis oil for power generation in gas turbines," Renewable Energy, Elsevier, vol. 99(C), pages 443-451.
    16. Barik, Debabrata & Murugan, S., 2014. "Investigation on combustion performance and emission characteristics of a DI (direct injection) diesel engine fueled with biogas–diesel in dual fuel mode," Energy, Elsevier, vol. 72(C), pages 760-771.
    17. Chattopadhyay, Soham & Sen, Ramkrishna, 2013. "Fuel properties, engine performance and environmental benefits of biodiesel produced by a green process," Applied Energy, Elsevier, vol. 105(C), pages 319-326.
    18. Chen, Guisheng & Shen, Yinggang & Zhang, Quanchang & Yao, Mingfa & Zheng, Zunqing & Liu, Haifeng, 2013. "Experimental study on combustion and emission characteristics of a diesel engine fueled with 2,5-dimethylfuran–diesel, n-butanol–diesel and gasoline–diesel blends," Energy, Elsevier, vol. 54(C), pages 333-342.
    19. Wei, L. & Cheung, C.S. & Ning, Z., 2017. "Influence of waste cooking oil biodiesel on combustion, unregulated gaseous emissions and particulate emissions of a direct-injection diesel engine," Energy, Elsevier, vol. 127(C), pages 175-185.
    20. Abedin, M.J. & Kalam, M.A. & Masjuki, H.H. & Sabri, M.F.M. & Rahman, S.M. Ashrafur & Sanjid, A. & Fattah, I.M. Rizwanul, 2016. "Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5," Renewable Energy, Elsevier, vol. 88(C), pages 20-29.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:43:y:2012:i:1:p:146-160. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.