IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i1p320-327.html
   My bibliography  Save this article

Exergy analysis of an experimental heat transformer for water purification

Author

Listed:
  • Rivera, W.
  • Huicochea, A.
  • Martínez, H.
  • Siqueiros, J.
  • Juárez, D.
  • Cadenas, E.

Abstract

First and second law of thermodynamics have been used to analyze the performance of an experimental heat transformer used for water purification. The pure water is produced in the auxiliary condenser delivering an amount of heat, which is recycled into the heat transformer increasing the heat source temperatures and also the internal, external and exergy coefficients of performance. The theoretical and experimental study was divided into two parts. In the first part, a second law analysis was carried out to the experimental system showing that the absorber and the condenser are the components with the highest irreversibilities. In the second part, with the results obtained from the second law analysis, new test runs were carried out at similar conditions than the former but varying only one selected temperature at the time. Comparing the COP (coefficient of performance) between the old and new test runs, it was shown that higher internal, external and exergy coefficients of performance were obtained in all the new test runs. Also it was shown that the ECOP (exergy coefficient of performance) increases with an increment of the amount of the purified water produced and with the decrease of the flow ratio.

Suggested Citation

  • Rivera, W. & Huicochea, A. & Martínez, H. & Siqueiros, J. & Juárez, D. & Cadenas, E., 2011. "Exergy analysis of an experimental heat transformer for water purification," Energy, Elsevier, vol. 36(1), pages 320-327.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:1:p:320-327
    DOI: 10.1016/j.energy.2010.10.036
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544210005992
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2010.10.036?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sözen, Adnan, 2004. "Effect of irreversibilities on performance of an absorption heat transformer used to increase solar pond’s temperature," Renewable Energy, Elsevier, vol. 29(4), pages 501-515.
    2. Cortés, E. & Rivera, W., 2010. "Exergetic and exergoeconomic optimization of a cogeneration pulp and paper mill plant including the use of a heat transformer," Energy, Elsevier, vol. 35(3), pages 1289-1299.
    3. Vidal, A. & Best, R. & Rivero, R. & Cervantes, J., 2006. "Analysis of a combined power and refrigeration cycle by the exergy method," Energy, Elsevier, vol. 31(15), pages 3401-3414.
    4. Costa, Andrea & Bakhtiari, Bahador & Schuster, Sebastian & Paris, Jean, 2009. "Integration of absorption heat pumps in a Kraft pulp process for enhanced energy efficiency," Energy, Elsevier, vol. 34(3), pages 254-260.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gao, J.T. & Xu, Z.Y. & Wang, R.Z., 2021. "An air-source hybrid absorption-compression heat pump with large temperature lift," Applied Energy, Elsevier, vol. 291(C).
    2. Wang, Shikuan & Liu, Yilun & Chen, Yao & Wang, Qin & Xu, Xiangguo & Chen, Guangming & Deng, Shiming, 2019. "Experimental investigations on the temperature lift performance of a novel diffusion absorption heat transformer," Energy, Elsevier, vol. 170(C), pages 906-914.
    3. Salata, F. & Coppi, M., 2014. "A first approach study on the desalination of sea water using heat transformers powered by solar ponds," Applied Energy, Elsevier, vol. 136(C), pages 611-618.
    4. Parham, Kiyan & Khamooshi, Mehrdad & Tematio, Daniel Boris Kenfack & Yari, Mortaza & Atikol, Uğur, 2014. "Absorption heat transformers – A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 34(C), pages 430-452.
    5. Oluleye, Gbemi & Jiang, Ning & Smith, Robin & Jobson, Megan, 2017. "A novel screening framework for waste heat utilization technologies," Energy, Elsevier, vol. 125(C), pages 367-381.
    6. Wang, Sheng & Xie, Xiaoyun & Jiang, Yi, 2014. "Optimization design of the large temperature lift/drop multi-stage vertical absorption temperature transformer based on entransy dissipation method," Energy, Elsevier, vol. 68(C), pages 712-721.
    7. Sharqawy, Mostafa H. & Zubair, Syed M. & Lienhard, John H., 2011. "Second law analysis of reverse osmosis desalination plants: An alternative design using pressure retarded osmosis," Energy, Elsevier, vol. 36(11), pages 6617-6626.
    8. Wakim, Michel & Rivera-Tinoco, Rodrigo, 2019. "Absorption heat transformers: Sensitivity study to answer existing discrepancies," Renewable Energy, Elsevier, vol. 130(C), pages 881-890.
    9. Donnellan, Philip & Byrne, Edmond & Oliveira, Jorge & Cronin, Kevin, 2014. "First and second law multidimensional analysis of a triple absorption heat transformer (TAHT)," Applied Energy, Elsevier, vol. 113(C), pages 141-151.
    10. Kim, Yoon Jo & Kim, Sarah & Joshi, Yogendra K. & Fedorov, Andrei G. & Kohl, Paul A., 2012. "Thermodynamic analysis of an absorption refrigeration system with ionic-liquid/refrigerant mixture as a working fluid," Energy, Elsevier, vol. 44(1), pages 1005-1016.
    11. Abed, Azher M. & Alghoul, M.A. & Sopian, K. & Majdi, Hasan Sh. & Al-Shamani, Ali Najah & Muftah, A.F., 2017. "Enhancement aspects of single stage absorption cooling cycle: A detailed review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 1010-1045.
    12. Wu, Wei & Wang, Baolong & Shi, Wenxing & Li, Xianting, 2014. "Absorption heating technologies: A review and perspective," Applied Energy, Elsevier, vol. 130(C), pages 51-71.
    13. Donnellan, Philip & Cronin, Kevin & Byrne, Edmond, 2015. "Recycling waste heat energy using vapour absorption heat transformers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 1290-1304.
    14. Lazcano-Véliz, Y. & Hernández, J.A. & Juárez-Romero, D. & Bourouis, Mahmoud & Coronas, Alberto & Siqueiros, J., 2017. "Energy efficiency assessment in the generator of an absorption heat transformer from measurement falling film thickness on helical coils," Applied Energy, Elsevier, vol. 208(C), pages 1274-1284.
    15. Mehri Akbari & Seyed M. S. Mahmoudi & Mortaza Yari & Marc A. Rosen, 2014. "Energy and Exergy Analyses of a New Combined Cycle for Producing Electricity and Desalinated Water Using Geothermal Energy," Sustainability, MDPI, vol. 6(4), pages 1-25, April.
    16. S. Mohammad S. Mahmoudi & Sina Salehi & Mortaza Yari & Marc A. Rosen, 2017. "Exergoeconomic Performance Comparison and Optimization of Single-Stage Absorption Heat Transformers," Energies, MDPI, vol. 10(4), pages 1-28, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wu, Wei & Wang, Baolong & Shi, Wenxing & Li, Xianting, 2014. "Absorption heating technologies: A review and perspective," Applied Energy, Elsevier, vol. 130(C), pages 51-71.
    2. Donnellan, Philip & Cronin, Kevin & Byrne, Edmond, 2015. "Recycling waste heat energy using vapour absorption heat transformers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 1290-1304.
    3. Donnellan, Philip & Cronin, Kevin & Acevedo, Yaset & Byrne, Edmond, 2014. "Economic evaluation of an industrial high temperature lift heat transformer," Energy, Elsevier, vol. 73(C), pages 581-591.
    4. Hernández-Magallanes, J.A. & Heard, C.L. & Best, R. & Rivera, W., 2018. "Modeling of a new absorption heat pump-transformer used to produce heat and power simultaneously," Energy, Elsevier, vol. 165(PA), pages 112-133.
    5. Donnellan, Philip & Byrne, Edmond & Oliveira, Jorge & Cronin, Kevin, 2014. "First and second law multidimensional analysis of a triple absorption heat transformer (TAHT)," Applied Energy, Elsevier, vol. 113(C), pages 141-151.
    6. Mehri Akbari & Seyed M. S. Mahmoudi & Mortaza Yari & Marc A. Rosen, 2014. "Energy and Exergy Analyses of a New Combined Cycle for Producing Electricity and Desalinated Water Using Geothermal Energy," Sustainability, MDPI, vol. 6(4), pages 1-25, April.
    7. Colorado, D. & Hernández, J.A. & Rivera, W. & Martínez, H. & Juárez, D., 2011. "Optimal operation conditions for a single-stage heat transformer by means of an artificial neural network inverse," Applied Energy, Elsevier, vol. 88(4), pages 1281-1290, April.
    8. Bakhtiari, Bahador & Fradette, Louis & Legros, Robert & Paris, Jean, 2010. "Opportunities for the integration of absorption heat pumps in the pulp and paper process," Energy, Elsevier, vol. 35(12), pages 4600-4606.
    9. Privat, Romain & Qian, Jun-Wei & Alonso, Dominique & Jaubert, Jean-Noël, 2013. "Quest for an efficient binary working mixture for an absorption-demixing heat transformer," Energy, Elsevier, vol. 55(C), pages 594-609.
    10. Manassaldi, Juan I. & Mussati, Sergio F. & Scenna, Nicolás J., 2011. "Optimal synthesis and design of Heat Recovery Steam Generation (HRSG) via mathematical programming," Energy, Elsevier, vol. 36(1), pages 475-485.
    11. Oluleye, Gbemi & Smith, Robin & Jobson, Megan, 2016. "Modelling and screening heat pump options for the exploitation of low grade waste heat in process sites," Applied Energy, Elsevier, vol. 169(C), pages 267-286.
    12. Utlu, Zafer & Kincay, Olcay, 2013. "An assessment of a pulp and paper mill through energy and exergy analyses," Energy, Elsevier, vol. 57(C), pages 565-573.
    13. Bao, Huashan & Wang, Yaodong & Charalambous, Constantinos & Lu, Zisheng & Wang, Liwei & Wang, Ruzhu & Roskilly, Anthony Paul, 2014. "Chemisorption cooling and electric power cogeneration system driven by low grade heat," Energy, Elsevier, vol. 72(C), pages 590-598.
    14. Jahromi, Farid Sadeghian & Beheshti, Masoud & Rajabi, Razieh Fereydon, 2018. "Comparison between differential evolution algorithms and response surface methodology in ethylene plant optimization based on an extended combined energy - exergy analysis," Energy, Elsevier, vol. 164(C), pages 1114-1134.
    15. Ali, Ramadan Hefny & Abdel Samee, Ahmed A. & Maghrabie, Hussein M., 2023. "Thermodynamic analysis of a cogeneration system in pulp and paper industry under singular and hybrid operating modes," Energy, Elsevier, vol. 263(PE).
    16. Wang, Jiangfeng & Dai, Yiping & Zhang, Taiyong & Ma, Shaolin, 2009. "Parametric analysis for a new combined power and ejector–absorption refrigeration cycle," Energy, Elsevier, vol. 34(10), pages 1587-1593.
    17. Larry Orobome Agberegha & Peter Alenoghena Aigba & Solomon Chuka Nwigbo & Francis Onoroh & Olusegun David Samuel & Tanko Bako & Oguzhan Der & Ali Ercetin & Ramazan Sener, 2024. "Investigation of a Hybridized Cascade Trigeneration Cycle Combined with a District Heating and Air Conditioning System Using Vapour Absorption Refrigeration Cooling: Energy and Exergy Assessments," Energies, MDPI, vol. 17(6), pages 1-34, March.
    18. van de Bor, D.M. & Infante Ferreira, C.A., 2013. "Quick selection of industrial heat pump types including the impact of thermodynamic losses," Energy, Elsevier, vol. 53(C), pages 312-322.
    19. Cao, Haibo & Li, Zhexu & Peng, Wanli & Yang, Hanxin & Guo, Juncheng, 2023. "Optimal analyses and performance bounds of the low-dissipation three-terminal heat transformer: The roles of the parameter constraints and optimization criteria," Energy, Elsevier, vol. 277(C).
    20. Wang, Jiangfeng & Dai, Yiping & Gao, Lin, 2008. "Parametric analysis and optimization for a combined power and refrigeration cycle," Applied Energy, Elsevier, vol. 85(11), pages 1071-1085, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:1:p:320-327. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.