IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v33y2008i12p1794-1800.html
   My bibliography  Save this article

Key parameters of active layers affecting proton exchange membrane (PEM) fuel cell performance

Author

Listed:
  • Thepkaew, Jarupuk
  • Therdthianwong, Apichai
  • Therdthianwong, Supaporn

Abstract

The 2n full factorial design was applied to identify the key parameters of the active layer affecting the performance of a proton exchange membrane (PEM) fuel cell. Three main selected parameters were considered: carbon-type (Vulcan XC 72R and Black Pearls 2000 conducting furnace blacks, Cabot Corporation Boston, MA), Pt loading (0.1 and 0.5mg/cm2), and Nafion™ sulfonic acid fluoropolymer (Du Pont de Nemours, Wilmington, DE) ionomer content (10% and 60%) for variables A, B, and C, respectively. The results from full factorial analysis indicated that the key factors affecting the exchange current density or activation loss were Pt loading whereas the key factors controlling the resistance due to ohmic loss were Nafion content and carbon type. In addition, there are the interactions between these parameters controlling the thin-film active layer performance, especially the interaction of carbon type and Nafion content. From cyclic voltammograms and cell performance testing, a Nafion content of 30% in a catalyst layer consisting of 0.5mg/cm2 Pt on Vulcan XC 72R is optimal.

Suggested Citation

  • Thepkaew, Jarupuk & Therdthianwong, Apichai & Therdthianwong, Supaporn, 2008. "Key parameters of active layers affecting proton exchange membrane (PEM) fuel cell performance," Energy, Elsevier, vol. 33(12), pages 1794-1800.
    • Handle: RePEc:eee:energy:v:33:y:2008:i:12:p:1794-1800
    DOI: 10.1016/j.energy.2008.08.008
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544208001953
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2008.08.008?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Therdthianwong, Apichai & Manomayidthikarn, Phochan & Therdthianwong, Supaporn, 2007. "Investigation of membrane electrode assembly (MEA) hot-pressing parameters for proton exchange membrane fuel cell," Energy, Elsevier, vol. 32(12), pages 2401-2411.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Afra, Mehran & Nazari, Mohsen & Kayhani, Mohammad Hasan & Sharifpur, M. & Meyer, J.P., 2019. "3D experimental visualization of water flooding in proton exchange membrane fuel cells," Energy, Elsevier, vol. 175(C), pages 967-977.
    2. Rahnavard, Aylin & Rowshanzamir, Soosan & Parnian, Mohammad Javad & Amirkhanlou, Gholam Reza, 2015. "The effect of sulfonated poly (ether ether ketone) as the electrode ionomer for self-humidifying nanocomposite proton exchange membrane fuel cells," Energy, Elsevier, vol. 82(C), pages 746-757.
    3. Mirzaei, Farokh & Parnian, Mohammad Javad & Rowshanzamir, Soosan, 2017. "Durability investigation and performance study of hydrothermal synthesized platinum-multi walled carbon nanotube nanocomposite catalyst for proton exchange membrane fuel cell," Energy, Elsevier, vol. 138(C), pages 696-705.
    4. Boyaci San, Fatma Gül & Isik-Gulsac, Isil & Okur, Osman, 2013. "Analysis of the polymer composite bipolar plate properties on the performance of PEMFC (polymer electrolyte membrane fuel cells) by RSM (response surface methodology)," Energy, Elsevier, vol. 55(C), pages 1067-1075.
    5. Huang, Yu-Xian & Cheng, Chin-Hsiang & Wang, Xiao-Dong & Jang, Jiin-Yuh, 2010. "Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells," Energy, Elsevier, vol. 35(12), pages 4786-4794.
    6. Huang, Zhen-Ming & Su, Ay & Liu, Ying-Chieh, 2013. "Hydrogen generator system using Ru catalyst for PEMFC (proton exchange membrane fuel cell) applications," Energy, Elsevier, vol. 51(C), pages 230-236.
    7. Parnian, Mohammad Javad & Rowshanzamir, Soosan & Gashoul, Fatemeh, 2017. "Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel ," Energy, Elsevier, vol. 125(C), pages 614-628.
    8. Laoun, Brahim & Kasat, Harshal A. & Ahmad, Riaz & Kannan, Arunachala M., 2018. "Gas diffusion layer development using design of experiments for the optimization of a proton exchange membrane fuel cell performance," Energy, Elsevier, vol. 151(C), pages 689-695.
    9. Xing, Lei & Mamlouk, Mohamed & Scott, Keith, 2013. "A two dimensional agglomerate model for a proton exchange membrane fuel cell," Energy, Elsevier, vol. 61(C), pages 196-210.
    10. San Martin, J.I. & Zamora, I. & San Martin, J.J. & Aperribay, V. & Torres, E. & Eguia, P., 2010. "Influence of the rated power in the performance of different proton exchange membrane (PEM) fuel cells," Energy, Elsevier, vol. 35(5), pages 1898-1907.
    11. Boyacı San, Fatma Gül & Okur, Osman & İyigün Karadağ, Çiğdem & Isik-Gulsac, Isil & Okumuş, Emin, 2014. "Evaluation of operating conditions on DBFC (direct borohydride fuel cell) performance with PtRu anode catalyst by response surface method," Energy, Elsevier, vol. 71(C), pages 160-169.
    12. Gao, Y. & Sun, G.Q. & Wang, S.L. & Zhu, S., 2010. "Carbon nanotubes based gas diffusion layers in direct methanol fuel cells," Energy, Elsevier, vol. 35(3), pages 1455-1459.
    13. Sayadi, Parvin & Rowshanzamir, Soosan & Parnian, Mohammad Javad, 2016. "Study of hydrogen crossover and proton conductivity of self-humidifying nanocomposite proton exchange membrane based on sulfonated poly (ether ether ketone)," Energy, Elsevier, vol. 94(C), pages 292-303.
    14. Ren, Zhijun & Zhang, Dongming & Wang, Zaiyi, 2012. "Stacks with TiN/titanium as the bipolar plate for PEMFCs," Energy, Elsevier, vol. 48(1), pages 577-581.
    15. Gong, Wenyin & Cai, Zhihua, 2013. "Accelerating parameter identification of proton exchange membrane fuel cell model with ranking-based differential evolution," Energy, Elsevier, vol. 59(C), pages 356-364.
    16. Lin, Rui & Wang, Hong & Zhu, Yu, 2021. "Optimizing the structural design of cathode catalyst layer for PEM fuel cells for improving mass-specific power density," Energy, Elsevier, vol. 221(C).
    17. Fofana, Daouda & Natarajan, Sadesh Kumar & Hamelin, Jean & Benard, Pierre, 2014. "Low platinum, high limiting current density of the PEMFC (proton exchange membrane fuel cell) based on multilayer cathode catalyst approach," Energy, Elsevier, vol. 64(C), pages 398-403.
    18. Zhiani, Mohammad & Majidi, Somayeh & Silva, Valter Bruno & Gharibi, Hussein, 2016. "Comparison of the performance and EIS (electrochemical impedance spectroscopy) response of an activated PEMFC (proton exchange membrane fuel cell) under low and high thermal and pressure stresses," Energy, Elsevier, vol. 97(C), pages 560-567.
    19. Alipour Moghaddam, Jafar & Parnian, Mohammad Javad & Rowshanzamir, Soosan, 2018. "Preparation, characterization, and electrochemical properties investigation of recycled proton exchange membrane for fuel cell applications," Energy, Elsevier, vol. 161(C), pages 699-709.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huang, Yu-Xian & Cheng, Chin-Hsiang & Wang, Xiao-Dong & Jang, Jiin-Yuh, 2010. "Effects of porosity gradient in gas diffusion layers on performance of proton exchange membrane fuel cells," Energy, Elsevier, vol. 35(12), pages 4786-4794.
    2. Parnian, Mohammad Javad & Rowshanzamir, Soosan & Gashoul, Fatemeh, 2017. "Comprehensive investigation of physicochemical and electrochemical properties of sulfonated poly (ether ether ketone) membranes with different degrees of sulfonation for proton exchange membrane fuel ," Energy, Elsevier, vol. 125(C), pages 614-628.
    3. Okur, Osman & İyigün Karadağ, Çiğdem & Boyacı San, Fatma Gül & Okumuş, Emin & Behmenyar, Gamze, 2013. "Optimization of parameters for hot-pressing manufacture of membrane electrode assembly for PEM (polymer electrolyte membrane fuel cells) fuel cell," Energy, Elsevier, vol. 57(C), pages 574-580.
    4. Rahnavard, Aylin & Rowshanzamir, Soosan & Parnian, Mohammad Javad & Amirkhanlou, Gholam Reza, 2015. "The effect of sulfonated poly (ether ether ketone) as the electrode ionomer for self-humidifying nanocomposite proton exchange membrane fuel cells," Energy, Elsevier, vol. 82(C), pages 746-757.
    5. Roudbari, Mohsen Najafi & Ojani, Reza & Raoof, Jahan Bakhsh, 2019. "Performance improvement of polymer fuel cell by simultaneously inspection of catalyst loading, catalyst content and ionomer using home-made cathodic half-cell and response surface method," Energy, Elsevier, vol. 173(C), pages 151-161.
    6. Mirzaei, Farokh & Parnian, Mohammad Javad & Rowshanzamir, Soosan, 2017. "Durability investigation and performance study of hydrothermal synthesized platinum-multi walled carbon nanotube nanocomposite catalyst for proton exchange membrane fuel cell," Energy, Elsevier, vol. 138(C), pages 696-705.
    7. Xing, Lei & Shi, Weidong & Su, Huaneng & Xu, Qian & Das, Prodip K. & Mao, Baodong & Scott, Keith, 2019. "Membrane electrode assemblies for PEM fuel cells: A review of functional graded design and optimization," Energy, Elsevier, vol. 177(C), pages 445-464.
    8. Najafi Roudbari, Mohsen & Ojani, Reza & Raoof, Jahan Bakhsh, 2017. "Investigation of hot pressing parameters for manufacture of catalyst-coated membrane electrode (CCME) for polymer electrolyte membrane fuel cells by response surface method," Energy, Elsevier, vol. 140(P1), pages 794-803.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:33:y:2008:i:12:p:1794-1800. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.