IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v307y2024ics0360544224025428.html
   My bibliography  Save this article

Performance investigation and optimization of an L-type thermoelectric generator

Author

Listed:
  • Luo, Ding
  • Liu, Zerui
  • Cao, Jin
  • Yan, Yuying
  • Cao, Bingyang

Abstract

Structural optimization is one of the effective means to improve thermoelectric generator (TEG) performance. Considering the inconsistent material parameters between P-type and N-type thermoelectrics, this paper proposes an L-type TEG configuration, where P-type and N-type semiconductors are designed with different heights and connected by L-shaped conductive strips. In addition, a thermal-electric-mechanical numerical model is established to evaluate and optimize the thermoelectric and mechanical performance of the L-type TEG. Results show that when the temperature difference is 400 K and the height ratio of the P-type to N-type semiconductor is 0.385, the L-type TEG achieves a maximum output power of 1.96 W and a maximum efficiency of 7.8 %. This is 2.39 % and 1.44 % higher, respectively, than the traditional π-type TEG. Although the temperature difference is not related to the optimal configuration of the L-type TEG, it will affect the extent of performance improvement, and the smaller the temperature difference, the greater the percentage gains of the L-type TEG compared to traditional design. In addition, the greater the difference in parameters (including Seebeck coefficient, thermal and electrical conductivity) between P-type and N-type is, the more significant the improvement of the L-type design will be. Specifically, the difference in electrical conductivity contributes to the increase of the output power, while the increase in the efficiency is affected by both the electrical conductivity and the thermal conductivity. This study provides a new perspective on the structural optimization of TEGs.

Suggested Citation

  • Luo, Ding & Liu, Zerui & Cao, Jin & Yan, Yuying & Cao, Bingyang, 2024. "Performance investigation and optimization of an L-type thermoelectric generator," Energy, Elsevier, vol. 307(C).
    • Handle: RePEc:eee:energy:v:307:y:2024:i:c:s0360544224025428
    DOI: 10.1016/j.energy.2024.132768
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224025428
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.132768?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Maduabuchi, Chika & Eneh, Chibuoke & Alrobaian, Abdulrahman Abdullah & Alkhedher, Mohammad, 2023. "Deep neural networks for quick and precise geometry optimization of segmented thermoelectric generators," Energy, Elsevier, vol. 263(PC).
    2. Hasan, Mohammed Nazibul & Nayan, Nafarizal & Nafea, Marwan & Muthalif, Asan G.A. & Mohamed Ali, Mohamed Sultan, 2022. "Novel structural design of wearable thermoelectric generator with vertically oriented thermoelements," Energy, Elsevier, vol. 259(C).
    3. Shittu, Samson & Li, Guiqiang & Zhao, Xudong & Ma, Xiaoli, 2020. "Review of thermoelectric geometry and structure optimization for performance enhancement," Applied Energy, Elsevier, vol. 268(C).
    4. Luo, Ding & Wu, Zihao & Jiang, Li & Yan, Yuying & Chen, Wei-Hsin & Cao, Jin & Cao, Bingyang, 2024. "Realizing rapid cooling and latent heat recovery in the thermoelectric-based battery thermal management system at high temperatures," Applied Energy, Elsevier, vol. 370(C).
    5. Tailin, Li & Youhong, Liu & Yingzeng, Zhang & Haodong, Chen & Qingpei, Xiang & Jun, Zeng & Rende, Ze & Yi, Liu & Yongchun, Xiang, 2023. "Comprehensive modeling and characterization of Chang'E-4 radioisotope thermoelectric generator for lunar mission," Applied Energy, Elsevier, vol. 336(C).
    6. Lin, Qiliang & Chen, Yi-Chung & Chen, Fangliang & DeGanyar, Tejav & Yin, Huiming, 2022. "Design and experiments of a thermoelectric-powered wireless sensor network platform for smart building envelope," Applied Energy, Elsevier, vol. 305(C).
    7. Luo, Ding & Zhao, Ye & Cao, Jin & Chen, Wei-Hsin & Zhao, Yulong & Cao, Bingyang, 2024. "Performance analysis of a novel thermoelectric-based battery thermal management system," Renewable Energy, Elsevier, vol. 224(C).
    8. Karana, Dhruv Raj & Sahoo, Rashmi Rekha, 2019. "Influence of geometric parameter on the performance of a new asymmetrical and segmented thermoelectric generator," Energy, Elsevier, vol. 179(C), pages 90-99.
    9. Nguyen Huu, Trung & Nguyen Van, Toan & Takahito, Ono, 2018. "Flexible thermoelectric power generator with Y-type structure using electrochemical deposition process," Applied Energy, Elsevier, vol. 210(C), pages 467-476.
    10. Yang, Wenlong & Jin, Chenchen & Zhu, Wenchao & Li, Yang & Zhang, Rui & Huang, Liang & Xie, Changjun & Shi, Ying, 2024. "Taguchi optimization and thermoelectrical analysis of a pin fin annular thermoelectric generator for automotive waste heat recovery," Renewable Energy, Elsevier, vol. 220(C).
    11. Zhao, Yulong & Zhang, Guoyin & Wen, Lei & Wang, Shixue & Wang, Yulin & Li, Yanzhe & Ge, Minghui, 2024. "Experimental study on thermoelectric characteristics of intermediate fluid thermoelectric generator," Applied Energy, Elsevier, vol. 365(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Luo, Ding & Zhang, Haokang & Cao, Jin & Yan, Yuyin & Cao, Bingyang, 2024. "Numerical investigation and optimization of a hexagonal thermoelectric generator with diverging fins for exhaust waste heat recovery," Energy, Elsevier, vol. 301(C).
    2. Luo, Ding & Li, Zheng & Yan, Yuying & Cao, Jin & Zhang, Haokang & Cao, Bingyang, 2024. "Performance analysis and optimization of an annular thermoelectric generator integrated with vapor chambers," Energy, Elsevier, vol. 307(C).
    3. Yang, Wenlong & Xie, Changjun & Jin, Chenchen & Zhu, Wenchao & Li, Yang & Tang, Xinfeng, 2024. "Simulation and experimental study of thermoelectric generators with an axial gradient metal foam heat exchanger," Renewable Energy, Elsevier, vol. 232(C).
    4. Chen, Jie & Wang, Ruochen & Ding, Renkai & Luo, Ding, 2024. "Comprehensive comparison and applicable range of separating and coupling numerical models of thermoelectric generation device for waste heat recovery," Energy, Elsevier, vol. 304(C).
    5. Xuan, Zhiwei & Ge, Minghui & Zhao, Chenyang & Li, Yanzhe & Wang, Shixue & Zhao, Yulong, 2024. "Effect of nonuniform solar radiation on the performance of solar thermoelectric generators," Energy, Elsevier, vol. 290(C).
    6. Ye-Qi Zhang & Jiao Sun & Guang-Xu Wang & Tian-Hu Wang, 2022. "Advantage of a Thermoelectric Generator with Hybridization of Segmented Materials and Irregularly Variable Cross-Section Design," Energies, MDPI, vol. 15(8), pages 1-18, April.
    7. Yuan, Jinfeng & Zhu, Rong, 2020. "A fully self-powered wearable monitoring system with systematically optimized flexible thermoelectric generator," Applied Energy, Elsevier, vol. 271(C).
    8. Luo, Ding & Yang, Shuo & Yan, Yuying & Cao, Jin & Yang, Xuelin & Cao, Bingyang, 2024. "Performance improvement of the automotive thermoelectric generator system with a novel heat pipe configuration," Energy, Elsevier, vol. 306(C).
    9. Ge, Ya & He, Kui & Xiao, Liehui & Yuan, Wuzhi & Huang, Si-Min, 2022. "Geometric optimization for the thermoelectric generator with variable cross-section legs by coupling finite element method and optimization algorithm," Renewable Energy, Elsevier, vol. 183(C), pages 294-303.
    10. Nan, Bohang & Guo, Tao & Deng, Hao & Zhang, Guangbing & Shi, Ran & Xin, Jiakai & Tang, Chen & Xu, Guiying, 2024. "Output performance improvement for thermoelectric transistor with the consideration of the Thomson effect and geometry optimization," Applied Energy, Elsevier, vol. 357(C).
    11. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ren, Fengsheng & Yang, Yue & Ma, Bijian & Zhu, Yonggang, 2023. "Performance optimization for a novel two-stage thermoelectric generator with different PCMs embedding modes," Energy, Elsevier, vol. 281(C).
    12. Yusuf, Aminu & Garcia, Davide Astiaso, 2023. "Energy, exergy, economic, and environmental (4E) analyses of bifacial concentrated thermoelectric-photovoltaic systems," Energy, Elsevier, vol. 282(C).
    13. Song Lv & Zuoqin Qian & Dengyun Hu & Xiaoyuan Li & Wei He, 2020. "A Comprehensive Review of Strategies and Approaches for Enhancing the Performance of Thermoelectric Module," Energies, MDPI, vol. 13(12), pages 1-24, June.
    14. He, Hongxi & Xie, Yongchuan & Zuo, Qingsong & Chen, Wei & Shen, Zhuang & Ma, Ying & Zhang, Hehui & Zhu, Guohui & Ouyang, Yixuan, 2024. "Optimization analysis for thermoelectric performance improvement of biconical segmented annular thermoelectric generator," Energy, Elsevier, vol. 306(C).
    15. Zhao, Yulong & Zhang, Guoyin & Wen, Lei & Wang, Shixue & Wang, Yulin & Li, Yanzhe & Ge, Minghui, 2024. "Experimental study on thermoelectric characteristics of intermediate fluid thermoelectric generator," Applied Energy, Elsevier, vol. 365(C).
    16. Fan, Shifa & Gao, Yuanwen & Rezania, Alireza, 2021. "Thermoelectric performance and stress analysis on wearable thermoelectric generator under bending load," Renewable Energy, Elsevier, vol. 173(C), pages 581-595.
    17. Chen, Jie & Wang, Ruochen & Ding, Renkai & Luo, Ding, 2024. "Matching design and numerical optimization of automotive thermoelectric generator system applied to range-extended electric vehicle," Applied Energy, Elsevier, vol. 370(C).
    18. Ko, Jinyoung & Cheon, Seong-Yong & Kang, Yong-Kwon & Jeong, Jae-Weon, 2022. "Design of a thermoelectric generator-assisted energy harvesting block considering melting temperature of phase change materials," Renewable Energy, Elsevier, vol. 193(C), pages 89-112.
    19. Wang, Xue & Zong, Yujie & Su, Wenbin & Wang, Chunlei & Wang, Hongchao, 2024. "Output and mechanical performance of thermoelectric generator under transient heat loads," Renewable Energy, Elsevier, vol. 222(C).
    20. Duan, Mengfan & Sun, Hongli & Lin, Borong & Wu, Yifan, 2021. "Evaluation on the applicability of thermoelectric air cooling systems for buildings with thermoelectric material optimization," Energy, Elsevier, vol. 221(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:307:y:2024:i:c:s0360544224025428. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.