IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v294y2024ics036054422400656x.html
   My bibliography  Save this article

Interfacial heat transfer and melt-front evolution at a Fractal Cantor structured interface under various PCM melting conditions

Author

Listed:
  • He, Junjie
  • Chu, Wenxiao
  • Wang, Qiuwang

Abstract

With the aim to investigate heat transfer characteristics of PCM on micro-textured hot surface, this study numerically investigates the heat transfer process of PCM at fractal Cantor structured surfaces using the total enthalpy-based lattice Boltzmann method, which is partly validated by experimental testing. The thermal slip length and liquid velocity distribution are assessed as evaluation criteria. Results show that Fractal Cantor structure can significantly stimulate localized thermal convection, thereby reducing the average thermal slip length from 0.3 mm to approximately 0.14 mm. When the Fourier number exceeds 0.1, both thermal conduction and convection should be considered within the melted layer. With the fractal level increasing, a more uniform melt-front evolution can be observed, consequently, minimizing the total melting time by 500 s with the fractal level of 3. Elevating Ste and gravity can significantly increase the flow rate of liquid PCM by augmenting superheat degree and buoyancy effect, thereby enhancing convective heat transfer strength and reducing thermal slip length. According to the orthogonal design, though the fractal level demonstrates minimal range values for both maximum velocity and Rayleigh number, it elevates the sensitivity to the variation of boundary conditions. Ste yields the most significant enhancement in heat transfer performance.

Suggested Citation

  • He, Junjie & Chu, Wenxiao & Wang, Qiuwang, 2024. "Interfacial heat transfer and melt-front evolution at a Fractal Cantor structured interface under various PCM melting conditions," Energy, Elsevier, vol. 294(C).
    • Handle: RePEc:eee:energy:v:294:y:2024:i:c:s036054422400656x
    DOI: 10.1016/j.energy.2024.130884
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422400656X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.130884?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Chenyu & Wang, Ning & Xu, Hongtao & Fang, Yuan & Yang, Qiguo & Talkhoncheh, Fariborz Karimi, 2023. "Thermal management optimization of the photovoltaic cell by the phase change material combined with metal fins," Energy, Elsevier, vol. 263(PA).
    2. Li, Xinyi & Duan, Jitong & Simon, Terrence & Ma, Ting & Cui, Tianhong & Wang, Qiuwang, 2021. "Nonuniform metal foam design and pore-scale analysis of a tilted composite phase change material system for photovoltaics thermal management," Applied Energy, Elsevier, vol. 298(C).
    3. Ma, Ying & Yang, Heng & Zuo, Hongyan & Zuo, Qingsong & He, Xiaoxiang & Chen, Wei & Wei, Rongrong, 2023. "EG@Bi-MOF derived porous carbon/lauric acid composite phase change materials for thermal management of batteries," Energy, Elsevier, vol. 272(C).
    4. Tao, Y.B. & He, Ya-Ling, 2018. "A review of phase change material and performance enhancement method for latent heat storage system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 93(C), pages 245-259.
    5. Zhongyong Wang & Zhen Tong & Qinxian Ye & Hang Hu & Xiao Nie & Chen Yan & Wen Shang & Chengyi Song & Jianbo Wu & Jun Wang & Hua Bao & Peng Tao & Tao Deng, 2017. "Dynamic tuning of optical absorbers for accelerated solar-thermal energy storage," Nature Communications, Nature, vol. 8(1), pages 1-9, December.
    6. Xi, Huan & Zhang, Honghu & He, Ya-Ling & Huang, Zuohua, 2019. "Sensitivity analysis of operation parameters on the system performance of organic rankine cycle system using orthogonal experiment," Energy, Elsevier, vol. 172(C), pages 435-442.
    7. Shamberger, Patrick J. & Bruno, Nickolaus M., 2020. "Review of metallic phase change materials for high heat flux transient thermal management applications," Applied Energy, Elsevier, vol. 258(C).
    8. Zhang, Jiangyun & Shao, Dan & Jiang, Liqin & Zhang, Guoqing & Wu, Hongwei & Day, Rodney & Jiang, Wenzhao, 2022. "Advanced thermal management system driven by phase change materials for power lithium-ion batteries: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    9. Samimi, Fereshteh & Babapoor, Aziz & Azizi, Mohammadmehdi & Karimi, Gholamreza, 2016. "Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers," Energy, Elsevier, vol. 96(C), pages 355-371.
    10. Chen, Jingtan & Ahmad, Shakeel & Cai, Junjie & Liu, Huaqiang & Lau, Kwun Ting & Zhao, Jiyun, 2021. "Latest progress on nanotechnology aided boiling heat transfer enhancement: A review," Energy, Elsevier, vol. 215(PA).
    11. Wuchen Fu & Xiao Yan & Yashraj Gurumukhi & Vivek S. Garimella & William P. King & Nenad Miljkovic, 2022. "High power and energy density dynamic phase change materials using pressure-enhanced close contact melting," Nature Energy, Nature, vol. 7(3), pages 270-280, March.
    12. Li, Xinyi & Cui, Wei & Simon, Terrence & Ma, Ting & Cui, Tianhong & Wang, Qiuwang, 2021. "Pore-scale analysis on selection of composite phase change materials for photovoltaic thermal management," Applied Energy, Elsevier, vol. 302(C).
    13. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ma, Binjian, 2023. "A compact and lightweight hybrid liquid cooling system coupling with Z-type cold plates and PCM composite for battery thermal management," Energy, Elsevier, vol. 263(PE).
    14. Shi, Lei & Hu, Yanwei & Bai, Yijie & He, Yurong, 2020. "Dynamic tuning of magnetic phase change composites for solar-thermal conversion and energy storage," Applied Energy, Elsevier, vol. 263(C).
    15. Tian, Yang & Liu, Xianglei & Zheng, Hangbin & Xu, Qiao & Zhu, Zhonghui & Luo, Qinyang & Song, Chao & Gao, Ke & Yao, Haichen & Dang, Chunzhuo & Xuan, Yimin, 2022. "Artificial mitochondrion for fast latent heat storage: Experimental study and lattice Boltzmann simulation," Energy, Elsevier, vol. 245(C).
    16. Jason Woods & Allison Mahvi & Anurag Goyal & Eric Kozubal & Adewale Odukomaiya & Roderick Jackson, 2021. "Rate capability and Ragone plots for phase change thermal energy storage," Nature Energy, Nature, vol. 6(3), pages 295-302, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yao, Haichen & Liu, Xianglei & Luo, Qingyang & Xu, Qiao & Tian, Yang & Ren, Tianze & Zheng, Hangbin & Gao, Ke & Dang, Chunzhuo & Xuan, Yimin & Liu, Zhan & Yang, Xiaohu & Ding, Yulong, 2022. "Experimental and numerical investigations of solar charging performances of 3D porous skeleton based latent heat storage devices," Applied Energy, Elsevier, vol. 320(C).
    2. Xinchen Zhou & Xiang Xu & Jiping Huang, 2023. "Adaptive multi-temperature control for transport and storage containers enabled by phase-change materials," Nature Communications, Nature, vol. 14(1), pages 1-14, December.
    3. Tang, Yong & Wang, Zhichao & Zhou, Jinzhi & Zeng, Chao & Lyu, Weihua & Lu, Lin & Yuan, Yanping, 2024. "Experimental study on the performance of packed-bed latent thermal energy storage system employing spherical capsules with hollow channels," Energy, Elsevier, vol. 293(C).
    4. Li, Xinyi & Cui, Wei & Simon, Terrence & Ma, Ting & Cui, Tianhong & Wang, Qiuwang, 2021. "Pore-scale analysis on selection of composite phase change materials for photovoltaic thermal management," Applied Energy, Elsevier, vol. 302(C).
    5. Liu, Huan & Tian, Xinxin & Ouyang, Mize & Wang, Xiang & Wu, Dezhen & Wang, Xiaodong, 2021. "Microencapsulating n-docosane phase change material into CaCO3/Fe3O4 composites for high-efficient utilization of solar photothermal energy," Renewable Energy, Elsevier, vol. 179(C), pages 47-64.
    6. Yafang Zhang & Jiebin Tang & Jialin Chen & Yuhai Zhang & Xiangxiang Chen & Meng Ding & Weijia Zhou & Xijin Xu & Hong Liu & Guobin Xue, 2023. "Accelerating the solar-thermal energy storage via inner-light supplying with optical waveguide," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    7. Lu, Shilei & Lin, Quanyi & Xu, Bowen & Yue, Lu & Feng, Wei, 2023. "Thermodynamic performance of cascaded latent heat storage systems for building heating," Energy, Elsevier, vol. 282(C).
    8. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    9. Zhou, Yuekuan & Zheng, Siqian, 2024. "A co-simulated material-component-system-district framework for climate-adaption and sustainability transition," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    10. Xue, X.J. & Wang, H.N. & Wang, J.H. & Yang, B. & Yan, J. & Zhao, C.Y., 2024. "Experimental and numerical investigation on latent heat/cold stores for advanced pumped-thermal energy storage," Energy, Elsevier, vol. 300(C).
    11. Shanks, Michael & Shoalmire, Charles M. & Deckard, Michael & Gohil, Karan N. & Lewis, Henry & Lin, Darin & Shamberger, Patrick J. & Jain, Neera, 2022. "Design of spatial variability in thermal energy storage modules for enhanced power density," Applied Energy, Elsevier, vol. 314(C).
    12. Luo, Ding & Wu, Zihao & Jiang, Li & Yan, Yuying & Chen, Wei-Hsin & Cao, Jin & Cao, Bingyang, 2024. "Realizing rapid cooling and latent heat recovery in the thermoelectric-based battery thermal management system at high temperatures," Applied Energy, Elsevier, vol. 370(C).
    13. Gu, Heng & Chang, Yunwei & Chen, Yuanyuan & Guo, Jiang rong & Zou, Deqiu, 2024. "Experimental research on pipeless power battery cooling system using shape-stabilized phase change materials (SSPCM) coupled with seawater," Energy, Elsevier, vol. 286(C).
    14. Yongyu Lu & Dehai Yu & Haoxuan Dong & Jinran Lv & Lichen Wang & He Zhou & Zhen Li & Jing Liu & Zhizhu He, 2022. "Magnetically tightened form-stable phase change materials with modular assembly and geometric conformality features," Nature Communications, Nature, vol. 13(1), pages 1-12, December.
    15. Mohammed, Abubakar Gambo & Elfeky, Karem Elsayed & Wang, Qiuwang, 2022. "Recent advancement and enhanced battery performance using phase change materials based hybrid battery thermal management for electric vehicles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    16. Jiang, Z.Y. & Qu, Z.G., 2019. "Lithium–ion battery thermal management using heat pipe and phase change material during discharge–charge cycle: A comprehensive numerical study," Applied Energy, Elsevier, vol. 242(C), pages 378-392.
    17. Luo, Rongrong & Wang, Liuwei & Yu, Wei & Shao, Feilong & Shen, Haikuo & Xie, Huaqing, 2023. "High energy storage density titanium nitride-pentaerythritol solid–solid composite phase change materials for light-thermal-electric conversion," Applied Energy, Elsevier, vol. 331(C).
    18. Huang, Ransisi & Mahvi, Allison & James, Nelson & Kozubal, Eric & Woods, Jason, 2024. "Evaluation of phase change thermal storage in a cascade heat pump," Applied Energy, Elsevier, vol. 359(C).
    19. E, Jiaqiang & Xiao, Hanxu & Tian, Sicheng & Huang, Yuxin, 2024. "A comprehensive review on thermal runaway model of a lithium-ion battery: Mechanism, thermal, mechanical, propagation, gas venting and combustion," Renewable Energy, Elsevier, vol. 229(C).
    20. Kawaguchi, Takahiro & Sakai, Hiroki & Sheng, Nan & Kurniawan, Ade & Nomura, Takahiro, 2020. "Microencapsulation of Zn-Al alloy as a new phase change material for middle-high-temperature thermal energy storage applications," Applied Energy, Elsevier, vol. 276(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:294:y:2024:i:c:s036054422400656x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.