IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v290y2024ics0360544223033753.html
   My bibliography  Save this article

Combination optimization, importance order of parameters and aging consequence prediction for thermal insulation coating with radiation characteristics

Author

Listed:
  • Chen, Xing-ni
  • Xu, Bin
  • Fei, Yue
  • Pei, Gang

Abstract

Thermal insulation coating (TIC) is beneficial for reducing building energy consumption. In this work, a joint optimization and analysis approach for multi-parameters of TIC was proposed to determine its optimization trend, importance order of parameter and available parameter combinations. Its radiation characteristics and thermal resistance were comprehensively considered. Based on the approach, TIC was evaluated from energy saving rate of cooling (ESRcool), heating (ESRheat), and total energy consumption (ESRtotal) in two climates: hot summer cold winter (Shanghai), and hot summer warm winter (Guangzhou). Results indicated that constantly positive ESRcool was only achieved by optimizing solar absorptivity, while constantly positive ESRheat can be obtained by optimizing different parameters. To guarantee positive ESRtotal, thermal resistance should exceed 0.11 m2·K·W−1 or solar absorptivity should be between 0.2 and 0.6 in Shanghai, while solar absorptivity should be between 0.1 and 0.3 in Guangzhou. For these two cities, the most important parameter was thermal resistance or solar absorptivity. The optimal TIC for Shanghai was “high thermal resistance + low solar absorptivity + low emissivity”, while high emissivity was suitable for Guangzhou. By utilizing the approach and results, energy-saving effect of TIC can be optimized during material design, and influence of material aging can be predicted.

Suggested Citation

  • Chen, Xing-ni & Xu, Bin & Fei, Yue & Pei, Gang, 2024. "Combination optimization, importance order of parameters and aging consequence prediction for thermal insulation coating with radiation characteristics," Energy, Elsevier, vol. 290(C).
    • Handle: RePEc:eee:energy:v:290:y:2024:i:c:s0360544223033753
    DOI: 10.1016/j.energy.2023.129981
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223033753
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129981?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xie, Xing & Chen, Xing-ni & Xu, Bin & Pei, Gang, 2022. "Investigation of occupied/unoccupied period on thermal comfort in Guangzhou: Challenges and opportunities of public buildings with high window-wall ratio," Energy, Elsevier, vol. 244(PB).
    2. Chen, Xing-ni & Xu, Bin & Fei, Yue & Gan, Wen-tao & Pei, Gang, 2023. "Parameter optimization of phase change material and the combination of phase change material and cool paint according to corresponding energy consumption characteristics under various climates," Energy, Elsevier, vol. 277(C).
    3. Adilkhanova, Indira & Memon, Shazim Ali & Kim, Jong & Sheriyev, Almas, 2021. "A novel approach to investigate the thermal comfort of the lightweight relocatable building integrated with PCM in different climates of Kazakhstan during summertime," Energy, Elsevier, vol. 217(C).
    4. Xu, Bin & Chen, Xing-ni & Fei, Yue & Gan, Wen-tao & Pei, Gang, 2023. "Optimizing the applicability of cool paint through phase change material according to the energy consumption characteristics in different regions," Renewable Energy, Elsevier, vol. 212(C), pages 953-971.
    5. Saafi, Khawla & Daouas, Naouel, 2019. "Energy and cost efficiency of phase change materials integrated in building envelopes under Tunisia Mediterranean climate," Energy, Elsevier, vol. 187(C).
    6. Kontoleon, Karolos J. & Saboor, Shaik & Mazzeo, Domenico & Ahmad, Jawad & Cuce, Erdem, 2023. "Thermal sensitivity and potential cooling-related energy saving of masonry walls through the lens of solar heat-rejecting paints at varying orientations," Applied Energy, Elsevier, vol. 329(C).
    7. Jianing Song & Wenluan Zhang & Zhengnan Sun & Mengyao Pan & Feng Tian & Xiuhong Li & Ming Ye & Xu Deng, 2022. "Durable radiative cooling against environmental aging," Nature Communications, Nature, vol. 13(1), pages 1-12, December.
    8. Yue, Xuejie & Wu, Hai & Zhang, Tao & Yang, Dongya & Qiu, Fengxian, 2022. "Superhydrophobic waste paper-based aerogel as a thermal insulating cooler for building," Energy, Elsevier, vol. 245(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fei, Yue & Xu, Bin & Chen, Xing-ni & Pei, Gang, 2024. "The role of emissivity of the window surface inside and outside the atmospheric window in the radiative cooling effect," Renewable Energy, Elsevier, vol. 226(C).
    2. Chen, Xing-ni & Xu, Bin & Fei, Yue & Gan, Wen-tao & Pei, Gang, 2023. "Parameter optimization of phase change material and the combination of phase change material and cool paint according to corresponding energy consumption characteristics under various climates," Energy, Elsevier, vol. 277(C).
    3. Liang, Yuntao & Wang, Ting & He, Zhenglong & Sun, Yong & Song, Shuanglin & Cui, Xinfeng & Cao, Yingjiazi, 2023. "High thermal storage capacity phase change microcapsules for heat transfer enhancement through hydroxylated-silanized nano-silicon carbide," Energy, Elsevier, vol. 285(C).
    4. Sun, Hongchang & Niu, Yanlei & Li, Chengdong & Zhou, Changgeng & Zhai, Wenwen & Chen, Zhe & Wu, Hao & Niu, Lanqiang, 2022. "Energy consumption optimization of building air conditioning system via combining the parallel temporal convolutional neural network and adaptive opposition-learning chimp algorithm," Energy, Elsevier, vol. 259(C).
    5. Xie, Xing & Xu, Bin & Cheng, Yuan-xia & Pei, Gang, 2023. "New method of integrating experiment for maintaining low indoor temperature into numerical modelling: A feasibility demonstration in reduced-scale building model," Energy, Elsevier, vol. 284(C).
    6. Wang, Pengcheng & Liu, Zhongbing & Zhang, Ling & Wang, Zhe & Fan, Jianhua, 2023. "Inversion of extinction coefficient and refractive index of variable transparency solid–solid phase change material based on a hybrid model under real climatic conditions," Applied Energy, Elsevier, vol. 341(C).
    7. Xu, Nuo & Wang, Jiacheng & Cui, Yubo & Ren, Shenghao & Deng, Jiangbin & Gou, Qianzhi & Chen, Zhaoyu & Wang, Kaixin & Geng, Yang & Cui, Jiaxi & Li, Meng, 2024. "Butterfly wing-inspired microstructured film with high reflectivity for efficient passive radiative cooling," Renewable Energy, Elsevier, vol. 229(C).
    8. Xueke Wu & Jinlei Li & Fei Xie & Xun-En Wu & Siming Zhao & Qinyuan Jiang & Shiliang Zhang & Baoshun Wang & Yunrui Li & Di Gao & Run Li & Fei Wang & Ya Huang & Yanlong Zhao & Yingying Zhang & Wei Li & , 2024. "A dual-selective thermal emitter with enhanced subambient radiative cooling performance," Nature Communications, Nature, vol. 15(1), pages 1-11, December.
    9. Lianhu Xiong & Yun Wei & Chuanliang Chen & Xin Chen & Qiang Fu & Hua Deng, 2023. "Thin lamellar films with enhanced mechanical properties for durable radiative cooling," Nature Communications, Nature, vol. 14(1), pages 1-9, December.
    10. Lee, Minjung & Ham, Jeonggyun & Lee, Jeong-Won & Cho, Honghyun, 2023. "Analysis of thermal comfort, energy consumption, and CO2 reduction of indoor space according to the type of local heating under winter rest conditions," Energy, Elsevier, vol. 268(C).
    11. Xu, Bin & Chen, Xing-ni & Fei, Yue & Gan, Wen-tao & Pei, Gang, 2023. "Optimizing the applicability of cool paint through phase change material according to the energy consumption characteristics in different regions," Renewable Energy, Elsevier, vol. 212(C), pages 953-971.
    12. Wang, Chongwei & Cheng, Chuanxiao & Jin, Tingxiang & Dong, Hongsheng, 2022. "Water evaporation inspired biomass-based PCM from daisy stem and paraffin for building temperature regulation," Renewable Energy, Elsevier, vol. 194(C), pages 211-219.
    13. Sarrafha, Hamid & Kasaeian, Alibakhsh & Jahangir, Mohammad Hossein & Taylor, Robert A., 2021. "Transient thermal response of multi-walled carbon nanotube phase change materials in building walls," Energy, Elsevier, vol. 224(C).
    14. El-Raheim, D. Abd & Mohamed, A. & Abou-Ziyan, H. & Fatouh, M., 2023. "The essential properties governing the appropriate selection of phase change materials integrated into heavy structure buildings," Energy, Elsevier, vol. 266(C).
    15. Ahmad, Abrar & Memon, Shazim Ali, 2024. "A novel method to evaluate phase change materials' impact on buildings' energy, economic, and environmental performance via controlled natural ventilation," Applied Energy, Elsevier, vol. 353(PB).
    16. Jiang, Kaiyu & Zhang, Kai & Shi, Zijie & Li, Haoran & Wu, Bingyang & Mahian, Omid & Zhu, Yutong, 2023. "Experimental and numerical study on the potential of a new radiative cooling paint boosted by SiO2 microparticles for energy saving," Energy, Elsevier, vol. 283(C).
    17. Arıcı, Müslüm & Bilgin, Feyza & Krajčík, Michal & Nižetić, Sandro & Karabay, Hasan, 2022. "Energy saving and CO2 reduction potential of external building walls containing two layers of phase change material," Energy, Elsevier, vol. 252(C).
    18. Rongda Ye & Xiaoming Fang & Zhengguo Zhang, 2021. "Numerical Study on Energy-Saving Performance of a New Type of Phase Change Material Room," Energies, MDPI, vol. 14(13), pages 1-18, June.
    19. Atthakorn Thongtha & Somchai Maneewan & Ahmad Fazlizan, 2023. "Enhancing Thermal Performance of Autoclaved Aerated Concrete (AAC) Incorporating Sugar Sediment Waste and Recycled AAC with Phase Change Material-Coated Applications for Sustainable Energy Conservatio," Sustainability, MDPI, vol. 15(19), pages 1-16, September.
    20. Gencel, Osman & Subasi, Serkan & Ustaoglu, Abid & Sarı, Ahmet & Marasli, Muhammed & Hekimoğlu, Gökhan & Kam, Erol, 2022. "Development, characterization and thermo-regulative performance of microencapsulated phase change material included-glass fiber reinforced foam concrete as novel thermal energy effective-building mate," Energy, Elsevier, vol. 257(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:290:y:2024:i:c:s0360544223033753. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.