IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v283y2023ics0360544223024799.html
   My bibliography  Save this article

Multi-objective optimization of multi-channel cold plate under intermittent pulsating flow by RSM and NSGA-Ⅱ for thermal management of electric vehicle lithium-ion battery pack

Author

Listed:
  • Zuo, Wei
  • Li, Dexin
  • Li, Qingqing
  • Cheng, Qianju
  • Zhou, Kun
  • E, Jiaqiang

Abstract

The heat transfer and energy consumption characteristics are the most important performance parameters of cold plate for thermal management of electric vehicle lithium-ion battery pack. In this work, in order to address the issue about multi-objective optimization of multi-channel cold plate under intermittent pulsating flow, RSM (Response Surface Methodology) and Non-dominated Sorting Genetic Algorithm II (NSGA-II) is combined to make a trade-off between the average heat transfer coefficient and energy consumption of multi-channel cold plate under intermittent pulsating flow. Box-Behnken design is used to arrange a series of numerical investigations using the steady flow velocity vin, pulsation amplitude A, and pulsation frequency e as design variables and the average heat transfer coefficient have and energy consumption W as objective functions. Regression models are created in the form of quadratic polynomials, and the significance of each term in the model is determined by analysis of variance (ANOVA). Results show that the linear term of vin has the greatest effect on have and W. According to the Pareto optimal solution obtained from NSGA-II, the optimal objective functions are have = 394.7012 W m−2 °C−1, W = 0.1086 J, and the corresponding design variables are vin = 0.02392 m/s, A = 0.1778 and e = 3.1846 Hz.

Suggested Citation

  • Zuo, Wei & Li, Dexin & Li, Qingqing & Cheng, Qianju & Zhou, Kun & E, Jiaqiang, 2023. "Multi-objective optimization of multi-channel cold plate under intermittent pulsating flow by RSM and NSGA-Ⅱ for thermal management of electric vehicle lithium-ion battery pack," Energy, Elsevier, vol. 283(C).
    • Handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223024799
    DOI: 10.1016/j.energy.2023.129085
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223024799
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129085?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Huan-ling & Shi, Hang-bo & Shen, Han & Xie, Gongnan, 2019. "The performance management of a Li-ion battery by using tree-like mini-channel heat sinks: Experimental and numerical optimization," Energy, Elsevier, vol. 189(C).
    2. Zuo, Wei & Zhang, Yuntian & E, Jiaqiang & Li, Jing & Li, Qingqing & Zhang, Guangde, 2022. "Performance comparison between single S-channel and double S-channel cold plate for thermal management of a prismatic LiFePO4 battery," Renewable Energy, Elsevier, vol. 192(C), pages 46-57.
    3. Zhang, Yuntian & Zuo, Wei & E, Jiaqiang & Li, Jing & Li, Qingqing & Sun, Ke & Zhou, Kun & Zhang, Guangde, 2022. "Performance comparison between straight channel cold plate and inclined channel cold plate for thermal management of a prismatic LiFePO4 battery," Energy, Elsevier, vol. 248(C).
    4. Lari, Muhammad O. & Sahin, Ahmet Z., 2018. "Effect of retrofitting a silver/water nanofluid-based photovoltaic/thermal (PV/T) system with a PCM-thermal battery for residential applications," Renewable Energy, Elsevier, vol. 122(C), pages 98-107.
    5. Li, Jing & Zuo, Wei & E, Jiaqiang & Zhang, Yuntian & Li, Qingqing & Sun, Ke & Zhou, Kun & Zhang, Guangde, 2022. "Multi-objective optimization of mini U-channel cold plate with SiO2 nanofluid by RSM and NSGA-II," Energy, Elsevier, vol. 242(C).
    6. Zuo, Wei & Zhang, Yuntian & E, Jiaqiang & Huang, Yuhan & Li, Qingqing & Zhou, Kun & Zhang, Guangde, 2022. "Effects of multi-factors on performance of an improved multi-channel cold plate for thermal management of a prismatic LiFePO4 battery," Energy, Elsevier, vol. 261(PB).
    7. Li, Dexin & Zuo, Wei & Li, Qingqing & Zhang, Guangde & Zhou, Kun & E, Jiaqiang, 2023. "Effects of pulsating flow on the performance of multi-channel cold plate for thermal management of lithium-ion battery pack," Energy, Elsevier, vol. 273(C).
    8. Ren, Lei & Zhou, Sheng & Ou, Xunmin, 2020. "Life-cycle energy consumption and greenhouse-gas emissions of hydrogen supply chains for fuel-cell vehicles in China," Energy, Elsevier, vol. 209(C).
    9. Gandoman, Foad H. & Jaguemont, Joris & Goutam, Shovon & Gopalakrishnan, Rahul & Firouz, Yousef & Kalogiannis, Theodoros & Omar, Noshin & Van Mierlo, Joeri, 2019. "Concept of reliability and safety assessment of lithium-ion batteries in electric vehicles: Basics, progress, and challenges," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    10. Sun, Yuze & Rao, Zhuming & Zhao, Dan & Wang, Bing & Sun, Dakun & Sun, Xiaofeng, 2020. "Characterizing nonlinear dynamic features of self-sustained thermoacoustic oscillations in a premixed swirling combustor," Applied Energy, Elsevier, vol. 264(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zuo, Wei & Li, Dexin & Li, Qingqing & Cheng, Qianju & Huang, Yuhan, 2024. "Effects of intermittent pulsating flow on the performance of multi-channel cold plate in electric vehicle lithium-ion battery pack," Energy, Elsevier, vol. 294(C).
    2. Li, Dexin & Zuo, Wei & Li, Qingqing & Zhang, Guangde & Zhou, Kun & E, Jiaqiang, 2023. "Effects of pulsating flow on the performance of multi-channel cold plate for thermal management of lithium-ion battery pack," Energy, Elsevier, vol. 273(C).
    3. Li, Haoxuan & Chen, Long & Zuo, Hongyan & Zhang, Bin & Jia, Guohai, 2024. "Performance enhancement of a battery thermal management system using novel liquid cold plates with micro-channel featuring pin fins," Energy, Elsevier, vol. 301(C).
    4. Ćalasan, Martin & Abdel Aleem, Shady H.E. & Hasanien, Hany M. & Alaas, Zuhair M. & Ali, Ziad M., 2023. "An innovative approach for mathematical modeling and parameter estimation of PEM fuel cells based on iterative Lambert W function," Energy, Elsevier, vol. 264(C).
    5. Zuo, Wei & Wang, Zijie & E, Jiaqiang & Li, Qingqing & Cheng, Qianju & Wu, Yinkun & Zhou, Kun, 2023. "Numerical investigations on the performance of a hydrogen-fueled micro planar combustor with tube outlet for thermophotovoltaic applications," Energy, Elsevier, vol. 263(PC).
    6. Zuo, Wei & Zhang, Yuntian & E, Jiaqiang & Huang, Yuhan & Li, Qingqing & Zhou, Kun & Zhang, Guangde, 2022. "Effects of multi-factors on performance of an improved multi-channel cold plate for thermal management of a prismatic LiFePO4 battery," Energy, Elsevier, vol. 261(PB).
    7. Chen, Zhijie & Zuo, Wei & Zhou, Kun & Li, Qingqing & Huang, Yuhan & E, Jiaqiang, 2023. "Multi-factor impact mechanism on the performance of high temperature proton exchange membrane fuel cell," Energy, Elsevier, vol. 278(PB).
    8. Li, Li & Ling, Lei & Xie, Yajun & Zhou, Wencai & Wang, Tianbo & Zhang, Lanchun & Bei, Shaoyi & Zheng, Keqing & Xu, Qiang, 2023. "Comparative study of thermal management systems with different cooling structures for cylindrical battery modules: Side-cooling vs. terminal-cooling," Energy, Elsevier, vol. 274(C).
    9. Orhan Yalçınkaya & Ufuk Durmaz & Ahmet Ümit Tepe & Ali Cemal Benim & Ünal Uysal, 2024. "Heat and Flow Characteristics of Aerofoil-Shaped Fins on a Curved Target Surface in a Confined Channel for an Impinging Jet Array," Energies, MDPI, vol. 17(5), pages 1-21, March.
    10. Xu, Wanrong & Kou, Chuanfu & E, Jiaqiang & Feng, Changling & Tan, Yan, 2024. "Effect analysis on the flow uniformity and pressure drop characteristics of the rotary diesel particulate filter for heavy-duty truck," Energy, Elsevier, vol. 288(C).
    11. Wang, Libiao & Zuo, Hongyan & Zhang, Bin & Jia, Guohai, 2024. "Effects of the cold plate with airfoil fins on the cooling performance enhancement of the prismatic LiFePO4 battery pack," Energy, Elsevier, vol. 296(C).
    12. Kumar, Vijay & Choudhary, Akhilesh Kumar, 2024. "Prediction of the Performance and emission characteristics of diesel engine using diphenylamine Antioxidant and ceria nanoparticle additives with biodiesel based on machine learning," Energy, Elsevier, vol. 301(C).
    13. Guo, Chao & Liu, Huan-ling & Guo, Qi & Shao, Xiao-dong & Zhu, Ming-liang, 2022. "Investigations on a novel cold plate achieved by topology optimization for lithium-ion batteries," Energy, Elsevier, vol. 261(PA).
    14. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ma, Binjian, 2023. "A compact and lightweight hybrid liquid cooling system coupling with Z-type cold plates and PCM composite for battery thermal management," Energy, Elsevier, vol. 263(PE).
    15. E, Jiaqiang & Qin, Yisheng & Zhang, Bin & Yin, Huichun & Tan, Yan, 2023. "Effects of heating film and phase change material on preheating performance of the lithium-ion battery pack with large capacity under low temperature environment," Energy, Elsevier, vol. 284(C).
    16. Zhao, Xiaohuan & Jiang, Jiang & Mao, Zhengsong, 2023. "Effect of filter material and porosity on the energy storage capacity characteristics of diesel particulate filter thermoelectric conversion mobile energy storage system," Energy, Elsevier, vol. 283(C).
    17. Tan, Dongli & Li, Dongmei & Wang, Su & Zhang, Zhiqing & Tian, Jie & Li, Jiangtao & Lv, Junshuai & Zheng, Wenling & Ye, Yanshuai, 2023. "Evaluation and optimization of hydrogen addition on the performance and emission for biodiesel dual-fuel engines with different blend ratios based on the response surface method," Energy, Elsevier, vol. 283(C).
    18. Zuo, Wei & Zhang, Yuntian & E, Jiaqiang & Li, Jing & Li, Qingqing & Zhang, Guangde, 2022. "Performance comparison between single S-channel and double S-channel cold plate for thermal management of a prismatic LiFePO4 battery," Renewable Energy, Elsevier, vol. 192(C), pages 46-57.
    19. Liu, Huaqiang & Gao, Xiangcheng & Zhao, Jiyun & Yu, Minghao & Niu, Dong & Ji, Yulong, 2022. "Liquid-based battery thermal management system performance improvement with intersected serpentine channels," Renewable Energy, Elsevier, vol. 199(C), pages 640-652.
    20. Hajialibabaei, Mahsa & Saghir, M.Ziad & Dincer, Ibrahim & Bicer, Yusuf, 2024. "Optimization of heat dissipation in novel design wavy channel heat sinks for better performance," Energy, Elsevier, vol. 297(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:283:y:2023:i:c:s0360544223024799. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.