IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223021801.html
   My bibliography  Save this article

Fuel/air mixing characteristics of a Micromix burner for hydrogen-rich gas turbine

Author

Listed:
  • Chen, Xuanren
  • Wang, Hui
  • Wang, Xiangyu
  • Liu, Xiang
  • Zhu, Yuxuan

Abstract

As a promising hydrogen-rich gas turbine combustion technology, Micro-mixing combustion may produce a new flame stabilization mechanism due to the novel structure. To investigate the effects of nozzle structural parameters and inlet aerodynamic parameters on mixing characteristics, this paper firstly used the background oriented schlieren technique combined with the self-development program to obtain the mixing quality, and the program was based on the optical flow method and Gladstone-Dale equation. The fuel-air mixture process was predicted by three mass diffusion models, and the Kinetic Theory model matched the experimental results best compared with the Constant Dilute Approximation model and Dilute Approximation model. The results showed that the main mixing zone moved closer to the outer wall when the premixed channel diameter increased. And the vorticity decreased with the increased premixed length, leading to a decline in mixing efficiency. For inlet aerodynamic parameters, changes in equivalence ratios only affected the shear-layer vorticity. As the combustible component of syngas was in the range of 60%–40% (by vol.), the outer wall of the premixed channel could promote fuel-air mixture. Moreover, when the equivalence ratio ranged in 0.335–0.685, the heating value of fuel varied as 4.686–7.029 and 11.715 MJ/Nm3, fuel and air were premixed uniformly near the nozzle outlet.

Suggested Citation

  • Chen, Xuanren & Wang, Hui & Wang, Xiangyu & Liu, Xiang & Zhu, Yuxuan, 2023. "Fuel/air mixing characteristics of a Micromix burner for hydrogen-rich gas turbine," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223021801
    DOI: 10.1016/j.energy.2023.128786
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223021801
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128786?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lopez-Ruiz, G. & Alava, I. & Blanco, J.M., 2021. "Study on the feasibility of the micromix combustion principle in low NOx H2 burners for domestic and industrial boilers: A numerical approach," Energy, Elsevier, vol. 236(C).
    2. Abdelhafez, Ahmed & Hussain, Muzafar & Nemitallah, Medhat A. & Habib, Mohamed A. & Ali, Asif, 2021. "Effects of jet diameter and spacing in a micromixer-like burner for clean oxy-fuel combustion in gas turbines," Energy, Elsevier, vol. 228(C).
    3. Descamps, C. & Bouallou, C. & Kanniche, M., 2008. "Efficiency of an Integrated Gasification Combined Cycle (IGCC) power plant including CO2 removal," Energy, Elsevier, vol. 33(6), pages 874-881.
    4. Yang, Xiehe & Wang, Tiantian & Zhang, Yang & Zhang, Hai & Wu, Yuxin & Zhang, Jiansheng, 2022. "Hydrogen effect on flame extinction of hydrogen-enriched methane/air premixed flames: An assessment from the combustion safety point of view," Energy, Elsevier, vol. 239(PC).
    5. Yang, Xiao & Yang, Wenming & Dong, Shikui & Tan, Heping, 2020. "Flame stability analysis of premixed hydrogen/air mixtures in a swirl micro-combustor," Energy, Elsevier, vol. 209(C).
    6. Zhang, Chao & Shen, Yuanhui & Zhang, Donghui & Tang, Zhongli & Li, Wenbin, 2022. "Vacuum pressure swing adsorption for producing fuel cell grade hydrogen from IGCC," Energy, Elsevier, vol. 257(C).
    7. Lopez-Ruiz, G. & Alava, I. & Blanco, J.M., 2023. "Impact of H2/CH4 blends on the flexibility of micromix burners applied to industrial combustion systems," Energy, Elsevier, vol. 270(C).
    8. Hussain, Muzafar & Abdelhafez, Ahmed & Nemitallah, Medhat A. & Araoye, Abdulrazaq A. & Ben-Mansour, Rached & Habib, Mohamed A., 2020. "A highly diluted oxy-fuel micromixer combustor with hydrogen enrichment for enhancing turndown in gas turbines," Applied Energy, Elsevier, vol. 279(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lopez-Ruiz, G. & Alava, I. & Blanco, J.M., 2023. "Impact of H2/CH4 blends on the flexibility of micromix burners applied to industrial combustion systems," Energy, Elsevier, vol. 270(C).
    2. Igor Donskoy, 2023. "Techno-Economic Efficiency Estimation of Promising Integrated Oxyfuel Gasification Combined-Cycle Power Plants with Carbon Capture," Clean Technol., MDPI, vol. 5(1), pages 1-18, February.
    3. Simon Drost & Sven Eckart & Chunkan Yu & Robert Schießl & Hartmut Krause & Ulrich Maas, 2023. "Numerical and Experimental Investigations of CH 4 /H 2 Mixtures: Ignition Delay Times, Laminar Burning Velocity and Extinction Limits," Energies, MDPI, vol. 16(6), pages 1-17, March.
    4. Sasaki, Takashi & Suzuki, Tomoko & Akasaka, Yasufumi & Takaoka, Masaki, 2017. "Generation efficiency improvement of IGCC with CO2 capture by the application of the low temperature reactive shift catalyst," Energy, Elsevier, vol. 118(C), pages 60-67.
    5. Lee, Jong Jun & Kim, Young Sik & Cha, Kyu Sang & Kim, Tong Seop & Sohn, Jeong L. & Joo, Yong Jin, 2009. "Influence of system integration options on the performance of an integrated gasification combined cycle power plant," Applied Energy, Elsevier, vol. 86(9), pages 1788-1796, September.
    6. Fontana, Éliton & Battiston, Lucas & Oliveira, Rosivaldo G.A. & Capeletto, Claudia A. & Luz, Luiz F.L., 2022. "Beyond the combustion chamber: Heat transfer and its impact on micro-thermophotovoltaic systems performance," Energy, Elsevier, vol. 239(PC).
    7. Farboud Khatami & Erfan Goharian, 2022. "Beyond Profitable Shifts to Green Energies, towards Energy Sustainability," Sustainability, MDPI, vol. 14(8), pages 1-28, April.
    8. Ding, Ya-Long & Xu, Chun-Gang & Yu, Yi-Song & Li, Xiao-Sen, 2017. "Methane recovery from natural gas hydrate with simulated IGCC syngas," Energy, Elsevier, vol. 120(C), pages 192-198.
    9. Xie, Bo & Peng, Qingguo & E, Jiaqiang & Tu, Yaojie & Wei, Jia & Tang, Shihao & Song, Yangyang & Fu, Guang, 2022. "Effects of CO addition and multi-factors optimization on hydrogen/air combustion characteristics and thermal performance based on grey relational analysis," Energy, Elsevier, vol. 255(C).
    10. Erlach, B. & Schmidt, M. & Tsatsaronis, G., 2011. "Comparison of carbon capture IGCC with pre-combustion decarbonisation and with chemical-looping combustion," Energy, Elsevier, vol. 36(6), pages 3804-3815.
    11. Ammar Bany Ata & Peter Maximilian Seufert & Christian Heinze & Falah Alobaid & Bernd Epple, 2021. "Optimization of Integrated Gasification Combined-Cycle Power Plant for Polygeneration of Power and Chemicals," Energies, MDPI, vol. 14(21), pages 1-24, November.
    12. Luis Puigjaner & Mar Pérez-Fortes & José M. Laínez-Aguirre, 2015. "Towards a Carbon-Neutral Energy Sector: Opportunities and Challenges of Coordinated Bioenergy Supply Chains-A PSE Approach," Energies, MDPI, vol. 8(6), pages 1-48, June.
    13. Kiso, F. & Matsuo, M., 2011. "A simulation study on the enhancement of the shift reaction by water injection into a gasifier," Energy, Elsevier, vol. 36(7), pages 4032-4040.
    14. Zhang, Jianyun & Zhou, Zhe & Ma, Linwei & Li, Zheng & Ni, Weidou, 2013. "Efficiency of wet feed IGCC (integrated gasification combined cycle) systems with coal–water slurry preheating vaporization technology," Energy, Elsevier, vol. 51(C), pages 137-145.
    15. Pettinau, Alberto & Ferrara, Francesca & Tola, Vittorio & Cau, Giorgio, 2017. "Techno-economic comparison between different technologies for CO2-free power generation from coal," Applied Energy, Elsevier, vol. 193(C), pages 426-439.
    16. Giuffrida, Antonio & Romano, Matteo C. & Lozza, Giovanni, 2013. "Efficiency enhancement in IGCC power plants with air-blown gasification and hot gas clean-up," Energy, Elsevier, vol. 53(C), pages 221-229.
    17. Lee, Woo-Sung & Lee, Jae-Cheol & Oh, Hyun-Taek & Baek, Seung-Won & Oh, Min & Lee, Chang-Ha, 2017. "Performance, economic and exergy analyses of carbon capture processes for a 300 MW class integrated gasification combined cycle power plant," Energy, Elsevier, vol. 134(C), pages 731-742.
    18. Chen, Qun & Xu, Yun-Chao & Hao, Jun-Hong, 2014. "An optimization method for gas refrigeration cycle based on the combination of both thermodynamics and entransy theory," Applied Energy, Elsevier, vol. 113(C), pages 982-989.
    19. Byun, Chang Ki & Kwon, Soon Jin & Im, Hyo Bin & Ahn, Hee Sung & Ryu, Ho Jung & Yi, Kwang Bok, 2016. "Novel method for investigation of a K–Mg-based CO2 sorbent for sorption-enhanced water–gas shift reaction," Renewable Energy, Elsevier, vol. 87(P1), pages 415-421.
    20. Abdelhafez, Ahmed & Hussain, Muzafar & Nemitallah, Medhat A. & Habib, Mohamed A. & Ali, Asif, 2021. "Effects of jet diameter and spacing in a micromixer-like burner for clean oxy-fuel combustion in gas turbines," Energy, Elsevier, vol. 228(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223021801. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.