IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v281y2023ics0360544223017243.html
   My bibliography  Save this article

An experimental assessment on a diesel engine powered by blends of waste-plastic-derived pyrolysis oil with diesel

Author

Listed:
  • Januszewicz, Katarzyna
  • Hunicz, Jacek
  • Kazimierski, Paweł
  • Rybak, Arkadiusz
  • Suchocki, Tomasz
  • Duda, Kamil
  • Mikulski, Maciej

Abstract

The utilization of plastic solid wastes for sustainable energy production is a crucial aspect of the circular economy. This study focuses on pyrolysis as an effective method to convert this feedstock into renewable drop-in fuel. To achieve this, it is essential to have a comprehensive understanding of feedstock composition, pyrolysis process parameters, and the physicochemical characteristics of the resulting fuel, all correlated with engine combustion parameters. Considering this full value chain, this study provides the first unbiased and up-to-date benchmark of polypropylene and polystyrene pyrolysis oils (PPO and PSO) produced in an industrial-grade batch reactor. The pyrolysis process was optimized to achieve ultra-high liquid yield levels of 92% for PPO and 98% for PSO with minimum energy consumption. After post-processing, blending with diesel, and normative fuel analytics, combustion/emission tests involving 20 species preceded under fully controllable conditions using a state-of-the-art single-cylinder research engine.

Suggested Citation

  • Januszewicz, Katarzyna & Hunicz, Jacek & Kazimierski, Paweł & Rybak, Arkadiusz & Suchocki, Tomasz & Duda, Kamil & Mikulski, Maciej, 2023. "An experimental assessment on a diesel engine powered by blends of waste-plastic-derived pyrolysis oil with diesel," Energy, Elsevier, vol. 281(C).
    • Handle: RePEc:eee:energy:v:281:y:2023:i:c:s0360544223017243
    DOI: 10.1016/j.energy.2023.128330
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223017243
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128330?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kalargaris, Ioannis & Tian, Guohong & Gu, Sai, 2017. "The utilisation of oils produced from plastic waste at different pyrolysis temperatures in a DI diesel engine," Energy, Elsevier, vol. 131(C), pages 179-185.
    2. Suchocki, T. & Witanowski, Ł. & Lampart, P. & Kazimierski, P. & Januszewicz, K. & Gawron, B., 2021. "Experimental investigation of performance and emission characteristics of a miniature gas turbine supplied by blends of kerosene and waste tyre pyrolysis oil," Energy, Elsevier, vol. 215(PA).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tomasz Suchocki & Paweł Kazimierski & Katarzyna Januszewicz & Piotr Lampart & Bartosz Gawron & Tomasz Białecki, 2024. "Exploring Performance of Pyrolysis-Derived Plastic Oils in Gas Turbine Engines," Energies, MDPI, vol. 17(16), pages 1-12, August.
    2. Muthukumar, K. & Kasiraman, G., 2024. "Utilization of fuel energy from single-use Low-density polyethylene plastic waste on CI engine with hydrogen enrichment – An experimental study," Energy, Elsevier, vol. 289(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huang, Jijiang & Veksha, Andrei & Chan, Wei Ping & Giannis, Apostolos & Lisak, Grzegorz, 2022. "Chemical recycling of plastic waste for sustainable material management: A prospective review on catalysts and processes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    2. Khatha Wathakit & Ekarong Sukjit & Chalita Kaewbuddee & Somkiat Maithomklang & Niti Klinkaew & Pansa Liplap & Weerachai Arjharn & Jiraphon Srisertpol, 2021. "Characterization and Impact of Waste Plastic Oil in a Variable Compression Ratio Diesel Engine," Energies, MDPI, vol. 14(8), pages 1-18, April.
    3. Muthukumar, K. & Kasiraman, G., 2024. "Utilization of fuel energy from single-use Low-density polyethylene plastic waste on CI engine with hydrogen enrichment – An experimental study," Energy, Elsevier, vol. 289(C).
    4. Szturgulewski, Kacper & Głuch, Jerzy & Drosińska-Komor, Marta & Ziółkowski, Paweł & Gardzilewicz, Andrzej & Brzezińska-Gołębiewska, Katarzyna, 2024. "Hybrid geothermal-fossil power cycle analysis in a Polish setting with a focus on off-design performance and CO2 emissions reductions," Energy, Elsevier, vol. 299(C).
    5. Chalita Kaewbuddee & Somkiat Maithomklang & Prasert Aengchuan & Attasit Wiangkham & Niti Klinkaew & Atthaphon Ariyarit & Ekarong Sukjit, 2023. "Effects of Alcohol-Blended Waste Plastic Oil on Engine Performance Characteristics and Emissions of a Diesel Engine," Energies, MDPI, vol. 16(3), pages 1-25, January.
    6. Śpiewak, Katarzyna & Czerski, Grzegorz & Soprych, Piotr, 2023. "Steam gasification of tire char supported by catalysts based on biomass ashes," Energy, Elsevier, vol. 285(C).
    7. Park, Ki-Bum & Oh, Seung-Jin & Begum, Guzelciftci & Kim, Joo-Sik, 2018. "Production of clean oil with low levels of chlorine and olefins in a continuous two-stage pyrolysis of a mixture of waste low-density polyethylene and polyvinyl chloride," Energy, Elsevier, vol. 157(C), pages 402-411.
    8. Balint Horvath & Edmund Mallinguh & Csaba Fogarassy, 2018. "Designing Business Solutions for Plastic Waste Management to Enhance Circular Transitions in Kenya," Sustainability, MDPI, vol. 10(5), pages 1-20, May.
    9. Das, Amar Kumar & Sahu, Santosh Kumar & Panda, Achyut Kumar, 2022. "Current status and prospects of alternate liquid transportation fuels in compression ignition engines: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    10. Gunerhan, Ali & Altuntas, Onder & Caliskan, Hakan, 2023. "Utilization of renewable and sustainable aviation biofuels from waste tyres for sustainable aviation transport sector," Energy, Elsevier, vol. 276(C).
    11. Wan Mahari, Wan Adibah & Chong, Cheng Tung & Cheng, Chin Kui & Lee, Chern Leing & Hendrata, Kristian & Yuh Yek, Peter Nai & Ma, Nyuk Ling & Lam, Su Shiung, 2018. "Production of value-added liquid fuel via microwave co-pyrolysis of used frying oil and plastic waste," Energy, Elsevier, vol. 162(C), pages 309-317.
    12. Bartosz Gawron & Aleksander Górniak & Tomasz Białecki & Anna Janicka & Radosław Włostowski & Adriana Włóka & Justyna Molska & Maciej Zawiślak, 2021. "Impact of a Synthetic Component on the Emission of Volatile Organic Compounds during the Combustion Process in a Miniature Turbine Engine," Energies, MDPI, vol. 14(24), pages 1-9, December.
    13. Grigore Cican & Daniel Eugeniu Crunteanu & Radu Mirea & Laurentiu Constantin Ceatra & Constantin Leventiu, 2023. "Biodiesel from Recycled Sunflower and Palm Oil—A Sustainable Fuel for Microturbo-Engines Used in Airside Applications," Sustainability, MDPI, vol. 15(3), pages 1-16, January.
    14. Andrzej Biessikirski & Dominik Czerwonka & Jolanta Biegańska & Łukasz Kuterasiński & Magdalena Ziąbka & Michał Dworzak & Michał Twardosz, 2020. "Research on the Possible Application of Polyolefin Waste-Derived Pyrolysis Oils for ANFO Manufacturing," Energies, MDPI, vol. 14(1), pages 1-15, December.
    15. María Teresa Martín & Juan Luis Aguirre & Juan Baena-González & Sergio González & Roberto Pérez-Aparicio & Leticia Saiz-Rodríguez, 2022. "Influence of Specific Power on the Solid and Liquid Products Obtained in the Microwave-Assisted Pyrolysis of End-of-Life Tires," Energies, MDPI, vol. 15(6), pages 1-17, March.
    16. Park, Ki-Bum & Jeong, Yong-Seong & Kim, Joo-Sik, 2019. "Activator-assisted pyrolysis of polypropylene," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    17. Dobó, Zsolt & Jakab, Zsófia & Nagy, Gábor & Koós, Tamás & Szemmelveisz, Katalin & Muránszky, Gábor, 2019. "Transportation fuel from plastic wastes: Production, purification and SI engine tests," Energy, Elsevier, vol. 189(C).
    18. Paweł Niszczota & Marian Gieras, 2021. "Effect of Adding Emulsifier to Fuel on Work Efficiency and Gas Turbine Emissions," Energies, MDPI, vol. 14(17), pages 1-15, August.
    19. Tomasz Białecki & Wojciech Dzięgielewski & Mirosław Kowalski & Andrzej Kulczycki, 2021. "Reactivity Model as a Tool to Compare the Combustion Process in Aviation Turbine Engines Powered by Synthetic Fuels," Energies, MDPI, vol. 14(19), pages 1-16, October.
    20. Stella Bezergianni & Athanasios Dimitriadis & Gian-Claudio Faussone & Dimitrios Karonis, 2017. "Alternative Diesel from Waste Plastics," Energies, MDPI, vol. 10(11), pages 1-12, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:281:y:2023:i:c:s0360544223017243. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.