IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v272y2023ics0360544223005224.html
   My bibliography  Save this article

Round-the-clock performance of solar thermoelectric wall with phase change material in subtropical climate: Critical analysis and parametric investigations

Author

Listed:
  • Hong, Bing-Hua
  • Huang, Xiao-Yan
  • He, Jian-Wei
  • Cai, Yang
  • Wang, Wei-Wei
  • Zhao, Fu-Yun

Abstract

The published literature focuses on the electrical performance of thermoelectric envelope and scarcely investigates its impact on indoor cooling and heating loads, which cannot comprehensively reflect the energy saving potential of thermoelectric envelope. In this work, a solar thermoelectric wall with phase change material (STEW-PCM) is developed to investigate its potential for power generation round-the-clock and its influence on the indoor thermal environment in the subtropical climate. Sensitivity analyses have been conducted to characterize the matching relationship between PCM parameters (melting temperature, latent heat and thickness) and the proposed system. Meanwhile, the energy saving potential of STEW-PCM system is forecasted in terms of annual electrical energy, environmental benefit and cooling load. The results show that STEW-PCM system has the potential of power generation round-the-clock judging from the temperature and output voltage. The annual electrical energy of STEW-PCM system can reach 1740.66 kJ/(m2·year), corresponding to Levelized Cost of Electricity (LCOE) of 35.37 c$/kJ and CO2 saving cost of 6.74 $/(m2·year). The cooling load can be effectively reduced by more than 25% with STEW-PCM system in the subtropical climate. This paper will be helpful to understand the dynamics characteristics of a solar thermoelectric wall with PCM for harvesting energy from environment.

Suggested Citation

  • Hong, Bing-Hua & Huang, Xiao-Yan & He, Jian-Wei & Cai, Yang & Wang, Wei-Wei & Zhao, Fu-Yun, 2023. "Round-the-clock performance of solar thermoelectric wall with phase change material in subtropical climate: Critical analysis and parametric investigations," Energy, Elsevier, vol. 272(C).
    • Handle: RePEc:eee:energy:v:272:y:2023:i:c:s0360544223005224
    DOI: 10.1016/j.energy.2023.127128
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223005224
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.127128?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Yijiang & Peng, Yizhu & Guo, Kehui & Zheng, Xiaofeng & Darkwa, Jo & Zhong, Hua, 2021. "Experimental investigation on performance improvement of thermoelectric generator based on phase change materials and heat transfer enhancement," Energy, Elsevier, vol. 229(C).
    2. Omar Isaac Asensio & Magali A. Delmas, 2017. "Correction: Corrigendum: The effectiveness of US energy efficiency building labels," Nature Energy, Nature, vol. 2(4), pages 1-1, April.
    3. Ko, Jinyoung & Jeong, Jae-Weon, 2021. "Annual performance evaluation of thermoelectric generator-assisted building-integrated photovoltaic system with phase change material," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    4. Garud, Kunal Sandip & Seo, Jae-Hyeong & Bang, You-Ma & Pyo, Young-Dug & Cho, Chong-Pyo & Lee, Moo-Yeon & Lee, Dong-Yeon, 2022. "Energy, exergy, environmental sustainability and economic analyses for automotive thermoelectric generator system with various configurations," Energy, Elsevier, vol. 244(PA).
    5. Tu, Yubin & Zhu, Wei & Lu, Tianqi & Deng, Yuan, 2017. "A novel thermoelectric harvester based on high-performance phase change material for space application," Applied Energy, Elsevier, vol. 206(C), pages 1194-1202.
    6. Wang, Jun & Song, Xiangxiang & Ni, Qiqiang & Li, Xingjun & Meng, Qingtian, 2021. "Experimental investigation on the influence of phase change material on the output performance of thermoelectric generator," Renewable Energy, Elsevier, vol. 177(C), pages 884-894.
    7. Borhani, S.M. & Hosseini, M.J. & Pakrouh, R. & Ranjbar, A.A. & Nourian, A., 2021. "Performance enhancement of a thermoelectric harvester with a PCM/Metal foam composite," Renewable Energy, Elsevier, vol. 168(C), pages 1122-1140.
    8. Meng, Jing-Hui & Gao, De-Yang & Liu, Yan & Zhang, Kai & Lu, Gui, 2022. "Heat transfer mechanism and structure design of phase change materials to improve thermoelectric device performance," Energy, Elsevier, vol. 245(C).
    9. Chen, Wei-Hsin & Chiou, Yi-Bin, 2020. "Geometry design for maximizing output power of segmented skutterudite thermoelectric generator by evolutionary computation," Applied Energy, Elsevier, vol. 274(C).
    10. Maduabuchi, Chika C. & Ejenakevwe, Kevwe A. & Mgbemene, Chigbo A., 2021. "Performance optimization and thermodynamic analysis of irreversibility in a contemporary solar thermoelectric generator," Renewable Energy, Elsevier, vol. 168(C), pages 1189-1206.
    11. Lin, Qiliang & Chen, Yi-Chung & Chen, Fangliang & DeGanyar, Tejav & Yin, Huiming, 2022. "Design and experiments of a thermoelectric-powered wireless sensor network platform for smart building envelope," Applied Energy, Elsevier, vol. 305(C).
    12. Saafi, Khawla & Daouas, Naouel, 2019. "Energy and cost efficiency of phase change materials integrated in building envelopes under Tunisia Mediterranean climate," Energy, Elsevier, vol. 187(C).
    13. Islam, Nazrul & Irshad, Kashif & Zahir, Md Hasan & Islam, Saiful, 2021. "Numerical and experimental study on the performance of a Photovoltaic Trombe wall system with Venetian blinds," Energy, Elsevier, vol. 218(C).
    14. Mahmoudinezhad, S. & Cotfas, D.T. & Cotfas, P.A. & Skjølstrup, Enok J.H. & Pedersen, K. & Rosendahl, L. & Rezania, A., 2022. "Experimental investigation on spectrum beam splitting photovoltaic–thermoelectric generator under moderate solar concentrations," Energy, Elsevier, vol. 238(PC).
    15. Ge, Ya & He, Kui & Xiao, Liehui & Yuan, Wuzhi & Huang, Si-Min, 2022. "Geometric optimization for the thermoelectric generator with variable cross-section legs by coupling finite element method and optimization algorithm," Renewable Energy, Elsevier, vol. 183(C), pages 294-303.
    16. Byon, Yoo-Suk & Jeong, Jae-Weon, 2020. "Phase change material-integrated thermoelectric energy harvesting block as an independent power source for sensors in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 128(C).
    17. Shittu, Samson & Li, Guiqiang & Xuan, Qindong & Zhao, Xudong & Ma, Xiaoli & Cui, Yu, 2020. "Electrical and mechanical analysis of a segmented solar thermoelectric generator under non-uniform heat flux," Energy, Elsevier, vol. 199(C).
    18. Atouei, S. Ahmadi & Rezania, A. & Ranjbar, A.A. & Rosendahl, L.A., 2018. "Protection and thermal management of thermoelectric generator system using phase change materials: An experimental investigation," Energy, Elsevier, vol. 156(C), pages 311-318.
    19. Cai, Yang & Wang, Lei & Ding, Wen-Tao & Liu, Di & Zhao, Fu-Yun, 2019. "Thermal performance of an active thermoelectric ventilation system applied for built space cooling: Network model and finite time thermodynamic optimization," Energy, Elsevier, vol. 170(C), pages 915-930.
    20. Huang, Bin & Shen, Zu-Guo, 2022. "Performance assessment of annular thermoelectric generators for automobile exhaust waste heat recovery," Energy, Elsevier, vol. 246(C).
    21. Liu, H.R. & Li, B.J. & Hua, L.J. & Wang, R.Z., 2022. "Designing thermoelectric self-cooling system for electronic devices: Experimental investigation and model validation," Energy, Elsevier, vol. 243(C).
    22. Omar Isaac Asensio & Magali A. Delmas, 2017. "The effectiveness of US energy efficiency building labels," Nature Energy, Nature, vol. 2(4), pages 1-9, April.
    23. Luo, Ding & Wang, Ruochen & Yan, Yuying & Yu, Wei & Zhou, Weiqi, 2021. "Transient numerical modelling of a thermoelectric generator system used for automotive exhaust waste heat recovery," Applied Energy, Elsevier, vol. 297(C).
    24. Lan, Song & Stobart, Richard & Wang, Xiaonan, 2022. "Matching and optimization for a thermoelectric generator applied in an extended-range electric vehicle for waste heat recovery," Applied Energy, Elsevier, vol. 313(C).
    25. Zuazua-Ros, Amaia & Martín-Gómez, César & Ibañez-Puy, Elia & Vidaurre-Arbizu, Marina & Gelbstein, Yaniv, 2019. "Investigation of the thermoelectric potential for heating, cooling and ventilation in buildings: Characterization options and applications," Renewable Energy, Elsevier, vol. 131(C), pages 229-239.
    26. Luo, Ding & Sun, Zeyu & Wang, Ruochen, 2022. "Performance investigation of a thermoelectric generator system applied in automobile exhaust waste heat recovery," Energy, Elsevier, vol. 238(PB).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sein Lae Yi Win & Yi-Chang Chiang & Tzu-Ling Huang & Chi-Ming Lai, 2024. "Thermoelectric Generator Applications in Buildings: A Review," Sustainability, MDPI, vol. 16(17), pages 1-25, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yousefi, Esmaeil & Nejad, Ali Abbas & Rezania, Alireza, 2022. "Higher power output in thermoelectric generator integrated with phase change material and metal foams under transient boundary condition," Energy, Elsevier, vol. 256(C).
    2. Meng, Jing-Hui & Gao, De-Yang & Liu, Yan & Zhang, Kai & Lu, Gui, 2022. "Heat transfer mechanism and structure design of phase change materials to improve thermoelectric device performance," Energy, Elsevier, vol. 245(C).
    3. Yang, Wenlong & Zhu, WenChao & Du, Banghua & Wang, Han & Xu, Lamei & Xie, Changjun & Shi, Ying, 2023. "Power generation of annular thermoelectric generator with silicone polymer thermal conductive oil applied in automotive waste heat recovery," Energy, Elsevier, vol. 282(C).
    4. Huang, Xiao-Yan & Zhou, Ze-Yu & Shu, Zheng-Yu & Cai, Yang & Lv, You & Wang, Wei-Wei & Zhao, Fu-Yun, 2024. "A phase change material based annular thermoelectric energy harvester from ambient temperature fluctuations: Transient modeling and critical characteristics," Renewable Energy, Elsevier, vol. 222(C).
    5. Joung, Jaewon & Kang, Yong-Kwon & Nam, Yujin & Jeong, Jae-Weon, 2024. "Analysis of power generation considering design and finishing materials of thermoelectric energy harvesting blocks," Renewable Energy, Elsevier, vol. 231(C).
    6. Zhao, Yulong & Lu, Mingjie & Li, Yanzhe & Wang, Yulin & Ge, Minghui, 2023. "Numerical investigation of an exhaust thermoelectric generator with a perforated plate," Energy, Elsevier, vol. 263(PB).
    7. Luo, Yang & Li, Linlin & Chen, Yiping & Kim, Chang Nyung, 2022. "Influence of geometric parameter and contact resistances on the thermal-electric behavior of a segmented TEG," Energy, Elsevier, vol. 254(PC).
    8. Yang, Wenlong & Jin, Chenchen & Zhu, Wenchao & Li, Yang & Zhang, Rui & Huang, Liang & Xie, Changjun & Shi, Ying, 2024. "Taguchi optimization and thermoelectrical analysis of a pin fin annular thermoelectric generator for automotive waste heat recovery," Renewable Energy, Elsevier, vol. 220(C).
    9. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ren, Fengsheng & Yang, Yue & Ma, Bijian & Zhu, Yonggang, 2023. "Performance optimization for a novel two-stage thermoelectric generator with different PCMs embedding modes," Energy, Elsevier, vol. 281(C).
    10. Maduabuchi, Chika, 2022. "Thermo-mechanical optimization of thermoelectric generators using deep learning artificial intelligence algorithms fed with verified finite element simulation data," Applied Energy, Elsevier, vol. 315(C).
    11. Ko, Jinyoung & Cheon, Seong-Yong & Kang, Yong-Kwon & Jeong, Jae-Weon, 2022. "Design of a thermoelectric generator-assisted energy harvesting block considering melting temperature of phase change materials," Renewable Energy, Elsevier, vol. 193(C), pages 89-112.
    12. Chen, Jie & Wang, Ruochen & Ding, Renkai & Luo, Ding, 2024. "Comprehensive comparison and applicable range of separating and coupling numerical models of thermoelectric generation device for waste heat recovery," Energy, Elsevier, vol. 304(C).
    13. Sun, Zeyu & Luo, Ding & Wang, Ruochen & Li, Ying & Yan, Yuying & Cheng, Ziming & Chen, Jie, 2022. "Evaluation of energy recovery potential of solar thermoelectric generators using a three-dimensional transient numerical model," Energy, Elsevier, vol. 256(C).
    14. Gao, Yuanzhi & Wang, Changling & Wu, Dongxu & Dai, Zhaofeng & Chen, Bo & Zhang, Xiaosong, 2022. "A numerical evaluation of the bifacial concentrated PV-STEG system cooled by mini-channel heat sink," Renewable Energy, Elsevier, vol. 192(C), pages 716-730.
    15. Wang, Jun & Song, Xiangxiang & Ni, Qiqiang & Li, Xingjun & Meng, Qingtian, 2021. "Experimental investigation on the influence of phase change material on the output performance of thermoelectric generator," Renewable Energy, Elsevier, vol. 177(C), pages 884-894.
    16. Yang, Wenlong & Xie, Changjun & Jin, Chenchen & Zhu, Wenchao & Li, Yang & Tang, Xinfeng, 2024. "Simulation and experimental study of thermoelectric generators with an axial gradient metal foam heat exchanger," Renewable Energy, Elsevier, vol. 232(C).
    17. Joung, Jaewon & Cheon, Seong-Yong & Kang, Yong-Kwon & Kim, Minseong & Park, Junseok & Jeong, Jae-Weon, 2023. "Impact of external electric resistance on the power generation in the thermoelectric energy harvesting blocks," Renewable Energy, Elsevier, vol. 212(C), pages 779-791.
    18. Chen, Jie & Wang, Ruochen & Ding, Renkai & Luo, Ding, 2024. "Matching design and numerical optimization of automotive thermoelectric generator system applied to range-extended electric vehicle," Applied Energy, Elsevier, vol. 370(C).
    19. Xuan, Zhiwei & Ge, Minghui & Zhao, Chenyang & Li, Yanzhe & Wang, Shixue & Zhao, Yulong, 2024. "Effect of nonuniform solar radiation on the performance of solar thermoelectric generators," Energy, Elsevier, vol. 290(C).
    20. Wang, Yilin & Cheng, Kunlin & Dang, Chaolei & Wang, Cong & Qin, Jiang & Huang, Hongyan, 2023. "Performance and experimental investigation for a novel heat storage based thermoelectric harvester for hypersonic vehicles," Energy, Elsevier, vol. 263(PD).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:272:y:2023:i:c:s0360544223005224. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.