IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipbs0360544222026962.html
   My bibliography  Save this article

Slow pyrolysis of low-density Poly-Ethylene (LDPE): A batch experiment and thermodynamic analysis

Author

Listed:
  • Chaudhary, Amita
  • Lakhani, Jay
  • Dalsaniya, Priyank
  • Chaudhary, Prins
  • Trada, Akshit
  • Shah, Niraj K.
  • Upadhyay, Darshit S.

Abstract

This research investigates the catalytic effect of activated charcoal, MgCO3, and ZSM-5 in a batch-pyrolysis reactor with a Low-Density Poly-Ethylene (LDPE) feedstock on pyro-oil yield. Initially, trials with the ZSM-5 catalyst were conducted at various temperatures ranging from 300 to 600 °C, in which 500 °C temperature offered a higher pyro-oil yield. Further, similar experiments were carried out with activated charcoal and MgCO3 at 500 °C. The qualitative and quantitative analysis of pyro-oil was done using GC/MS, DSC, TGA, and FTIR techniques. In GC/MS and FTIR, the range of hydrocarbon lying in C5 – C35 for aliphatic, aromatic, and phenolic groups. Moreover, the thermal stability of pyro-oil is found to be 350 °C and decreased by 10%–450 °C from TGA studies. The elemental analysis of char (C90.08% H9.82% N0.10%) and gas composition of pyro-gas were also studied. Additionally, thermal calculations were done for mass balance, energy balance, and exergy balance at various temperatures and found to be in good agreement with the input and output parameters. As per findings, the pyrolysis studies at 500 °C with LDPE feedstock and ZSM-5 catalyst showed higher pyro-oil yields than other tested catalysts under similar conditions.

Suggested Citation

  • Chaudhary, Amita & Lakhani, Jay & Dalsaniya, Priyank & Chaudhary, Prins & Trada, Akshit & Shah, Niraj K. & Upadhyay, Darshit S., 2023. "Slow pyrolysis of low-density Poly-Ethylene (LDPE): A batch experiment and thermodynamic analysis," Energy, Elsevier, vol. 263(PB).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pb:s0360544222026962
    DOI: 10.1016/j.energy.2022.125810
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222026962
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125810?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ptasinski, Krzysztof J. & Prins, Mark J. & Pierik, Anke, 2007. "Exergetic evaluation of biomass gasification," Energy, Elsevier, vol. 32(4), pages 568-574.
    2. Upadhyay, Darshit S. & Khosla, Aakash & Chaudhary, Amita & Patel, Rajesh N., 2019. "Effect of catalyst to lignite ratio on the performance of a pilot scale fixed bed gasifier," Energy, Elsevier, vol. 189(C).
    3. Zhang, Zhezi & Zhu, Mingming & Zhang, Dongke, 2018. "A Thermogravimetric study of the characteristics of pyrolysis of cellulose isolated from selected biomass," Applied Energy, Elsevier, vol. 220(C), pages 87-93.
    4. Atienza-Martínez, María & Ábrego, Javier & Mastral, José Francisco & Ceamanos, Jesús & Gea, Gloria, 2018. "Energy and exergy analyses of sewage sludge thermochemical treatment," Energy, Elsevier, vol. 144(C), pages 723-735.
    5. Patel, Vimal R. & Upadhyay, Darshit S. & Patel, Rajesh N., 2014. "Gasification of lignite in a fixed bed reactor: Influence of particle size on performance of downdraft gasifier," Energy, Elsevier, vol. 78(C), pages 323-332.
    6. Lucía Quesada & Mónica Calero de Hoces & M. A. Martín-Lara & Germán Luzón & G. Blázquez, 2020. "Performance of Different Catalysts for the In Situ Cracking of the Oil-Waxes Obtained by the Pyrolysis of Polyethylene Film Waste," Sustainability, MDPI, vol. 12(13), pages 1-15, July.
    7. Kongkasawan, Jinjuta & Nam, Hyungseok & Capareda, Sergio C., 2016. "Jatropha waste meal as an alternative energy source via pressurized pyrolysis: A study on temperature effects," Energy, Elsevier, vol. 113(C), pages 631-642.
    8. Upadhyay, Darshit S. & Panchal, Krunal R. & Sakhiya, Anil Kumar V & Patel, Rajesh N., 2020. "Air-Steam gasification of lignite in a fixed bed gasifier: Influence of steam to lignite ratio on performance of downdraft gasifier," Energy, Elsevier, vol. 211(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Nawaz, Ahmad & Razzak, Shaikh Abdur, 2024. "Co-pyrolysis of biomass and different plastic waste to reduce hazardous waste and subsequent production of energy products: A review on advancement, synergies, and future prospects," Renewable Energy, Elsevier, vol. 224(C).
    2. Onwuemezie, Linus & Gohari Darabkhani, Hamidreza, 2024. "Oxy-hydrogen, solar and wind assisted hydrogen (H2) recovery from municipal plastic waste (MPW) and saltwater electrolysis for better environmental systems and ocean cleanup," Energy, Elsevier, vol. 301(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kakati, Ujjiban & Sakhiya, Anil Kumar & Baghel, Paramjeet & Trada, Akshit & Mahapatra, Sadhan & Upadhyay, Darshit & Kaushal, Priyanka, 2022. "Sustainable utilization of bamboo through air-steam gasification in downdraft gasifier: Experimental and simulation approach," Energy, Elsevier, vol. 252(C).
    2. Baghel, Paramjeet & Sakhiya, Anil Kumar & Kaushal, Priyanka, 2022. "Influence of temperature on slow pyrolysis of Prosopis Juliflora: An experimental and thermodynamic approach," Renewable Energy, Elsevier, vol. 185(C), pages 538-551.
    3. Upadhyay, Darshit S. & Panchal, Krunal R. & Sakhiya, Anil Kumar V & Patel, Rajesh N., 2020. "Air-Steam gasification of lignite in a fixed bed gasifier: Influence of steam to lignite ratio on performance of downdraft gasifier," Energy, Elsevier, vol. 211(C).
    4. Wang, Linzheng & Zhang, Ruizhi & Deng, Ruiqu & Liu, Zeqing & Luo, Yonghao, 2023. "Comprehensive parametric study of fixed-bed co-gasification process through Multiple Thermally Thick Particle (MTTP) model," Applied Energy, Elsevier, vol. 348(C).
    5. Gassner, Martin & Maréchal, François, 2009. "Thermodynamic comparison of the FICFB and Viking gasification concepts," Energy, Elsevier, vol. 34(10), pages 1744-1753.
    6. Sérgio Ferreira & Eliseu Monteiro & Luís Calado & Valter Silva & Paulo Brito & Cândida Vilarinho, 2019. "Experimental and Modeling Analysis of Brewers´ Spent Grains Gasification in a Downdraft Reactor," Energies, MDPI, vol. 12(23), pages 1-18, November.
    7. Ábrego, J. & Atienza-Martínez, M. & Plou, F. & Arauzo, J., 2019. "Heat requirement for fixed bed pyrolysis of beechwood chips," Energy, Elsevier, vol. 178(C), pages 145-157.
    8. Gawlik, Bernd Manfred & Sobiecka, Elzbieta & Vaccaro, Stefano & Ciceri, Giovanni, 2007. "Quality management organisation, validation of standards, developments and inquiries for solid-recovered fuels--An overview on the QUOVADIS-Project," Energy Policy, Elsevier, vol. 35(12), pages 6293-6298, December.
    9. Martínez, Laura V. & Rubiano, Jairo E. & Figueredo, Manuel & Gómez, María F., 2020. "Experimental study on the performance of gasification of corncobs in a downdraft fixed bed gasifier at various conditions," Renewable Energy, Elsevier, vol. 148(C), pages 1216-1226.
    10. Wang, Jiang-Jiang & Yang, Kun & Xu, Zi-Long & Fu, Chao, 2015. "Energy and exergy analyses of an integrated CCHP system with biomass air gasification," Applied Energy, Elsevier, vol. 142(C), pages 317-327.
    11. Patel, Vimal R. & Patel, Darshil & Varia, Nandan S. & Patel, Rajesh N., 2017. "Co-gasification of lignite and waste wood in a pilot-scale (10 kWe) downdraft gasifier," Energy, Elsevier, vol. 119(C), pages 834-844.
    12. Jiao, Liguo & Li, Jian & Yan, Beibei & Chen, Guanyi & Ahmed, Sarwaich, 2022. "Microwave torrefaction integrated with gasification: Energy and exergy analyses based on Aspen Plus modeling," Applied Energy, Elsevier, vol. 319(C).
    13. Curcio, Axel & Rodat, Sylvain & Vuillerme, Valéry & Abanades, Stéphane, 2022. "Design and validation of reactant feeding control strategies for the solar-autothermal hybrid gasification of woody biomass," Energy, Elsevier, vol. 254(PC).
    14. Wang, Changbo & Zhang, Lixiao & Chang, Yuan & Pang, Mingyue, 2021. "Energy return on investment (EROI) of biomass conversion systems in China: Meta-analysis focused on system boundary unification," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    15. Singh, Deepak Kumar & Tirkey, Jeewan Vachan, 2022. "Performance optimization through response surface methodology of an integrated coal gasification and CI engine fuelled with diesel and low-grade coal-based producer gas," Energy, Elsevier, vol. 238(PC).
    16. Parvez, A.M. & Mujtaba, I.M. & Wu, T., 2016. "Energy, exergy and environmental analyses of conventional, steam and CO2-enhanced rice straw gasification," Energy, Elsevier, vol. 94(C), pages 579-588.
    17. Qin, Shiyue & Chang, Shiyan & Yao, Qiang, 2018. "Modeling, thermodynamic and techno-economic analysis of coal-to-liquids process with different entrained flow coal gasifiers," Applied Energy, Elsevier, vol. 229(C), pages 413-432.
    18. He, Chang & Feng, Xiao & Chu, Khim Hoong, 2013. "Process modeling and thermodynamic analysis of Lurgi fixed-bed coal gasifier in an SNG plant," Applied Energy, Elsevier, vol. 111(C), pages 742-757.
    19. Kong, Mengdi & Ye, Xuemin & Liu, Di & Li, Chunxi, 2024. "Comprehensive evaluation of medical waste gasification low-carbon multi-generation system based on AHP–EWM–GFCE method," Energy, Elsevier, vol. 296(C).
    20. Mendiburu, Andrés Z. & Carvalho, João A. & Coronado, Christian J.R., 2014. "Thermochemical equilibrium modeling of biomass downdraft gasifier: Stoichiometric models," Energy, Elsevier, vol. 66(C), pages 189-201.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pb:s0360544222026962. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.