IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v261y2022ipas0360544222021387.html
   My bibliography  Save this article

Numerical study on dynamic ash deposition and heat transfer characteristics of radiant syngas cooler

Author

Listed:
  • Xiong, Yao
  • Liu, Yinhe
  • Guan, Yu
  • Liu, Huizhen
  • Geng, Sajie

Abstract

Ash deposition greatly influences the performance of Radiant Syngas Cooler (RSC) which plays a pivotal role in the heat recovering process in coal gasification technology. Therefore, a numerical model of ash deposition coupled with heat transfer is established in present study to predict the ash deposition of RSC, and the effects of inlet temperature and division wall structure on deposition characteristics are further discussed. The simulation results indicate that the particle impact mainly occurs in the transition region of the jet flow to plug flow, while the particle deposit mainly occurs in the recirculation region. The deposition of inner wall and division wall shows a malignant growth pattern successively with the width increase of division wall. The division wall of 400 mm width is more conducive to the safe and stable operation of the RSC than those of 250 mm and 650 mm. The deposition becomes heavy with the increase of inlet temperature, and the deposition of division wall belongs to the slow growth, the large-scale detaching and the malignant growth pattern at the inlet temperature of 1573 K, 1673 K and 1773 K, respectively. Present result may provide a reference for the structural design and operational adjustment of RSC.

Suggested Citation

  • Xiong, Yao & Liu, Yinhe & Guan, Yu & Liu, Huizhen & Geng, Sajie, 2022. "Numerical study on dynamic ash deposition and heat transfer characteristics of radiant syngas cooler," Energy, Elsevier, vol. 261(PA).
    • Handle: RePEc:eee:energy:v:261:y:2022:i:pa:s0360544222021387
    DOI: 10.1016/j.energy.2022.125252
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222021387
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125252?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Cai, Yongtie & Tay, Kunlin & Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zeng, Guang & Li, Zhiwang & Keng Boon, Siah & Subbaiah, Prabakaran, 2018. "Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review," Applied Energy, Elsevier, vol. 230(C), pages 1447-1544.
    2. Zheng, Zhimin & Yang, Wenming & Cai, Yongtie & Wang, Qingxiang & Zeng, Guang, 2020. "Dynamic simulation on ash deposition and heat transfer behavior on a staggered tube bundle under high-temperature conditions," Energy, Elsevier, vol. 190(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Fenghai & Zhao, Chaoyue & Guo, Qianqian & Li, Yang & Fan, Hongli & Guo, Mingxi & Wu, Lishun & Huang, Jiejie & Fang, Yitian, 2020. "Exploration in ash-deposition (AD) behavior modification of low-rank coal by manure addition," Energy, Elsevier, vol. 208(C).
    2. Zhu, Yiming & Su, Haining & Qiu, Tongyu & Zhai, Yingmei & Mikulčić, Hrvoje & Wang, Xuebin & Zhang, Lan & Xie, Jun & Yang, Tianhua, 2024. "Modelling of fly ash viscous deposition and slagging prediction of biomass-fired boiler," Renewable Energy, Elsevier, vol. 227(C).
    3. Zheng, Zhimin & Yang, Wenming & Wang, Hui & Zhou, Anqi & Cai, Yongtie & Zeng, Guang & Xu, Hongpeng, 2021. "Development of a mechanistic fouling model for predicting deposit formation in a woodchip-fired grate boiler," Energy, Elsevier, vol. 220(C).
    4. Joanna Wnorowska & Waldemar Gądek & Sylwester Kalisz, 2020. "Statistical Model for Prediction of Ash Fusion Temperatures from Additive Doped Biomass," Energies, MDPI, vol. 13(24), pages 1-21, December.
    5. Long, Xiaofei & Li, Jianbo & Wang, Hongjian & Liang, Yintang & Lu, Xiaofeng & Zhang, Dongke, 2023. "The morphological and mineralogical characteristics and thermal conductivity of ash deposits in a 220 MW CFBB firing Zhundong lignite," Energy, Elsevier, vol. 263(PB).
    6. Ziqiang Yang & Fenghai Li & Mingjie Ma & Xuefei Liu & Hongli Fan & Zhenzhu Li & Yong Wang & Yitian Fang, 2023. "Regulation Mechanism of Solid Waste on Ash Fusion Characteristics of Sorghum Straw under O 2 /CO 2 Atmosphere," Energies, MDPI, vol. 16(20), pages 1-17, October.
    7. Álvarez-Bermúdez, César & Anca-Couce, Andrés & Chapela, Sergio & Scharler, Robert & Buchmayr, Markus & Gómez, Miguel Ángel & Porteiro, Jacobo, 2023. "Validation of a biomass conversion mechanism by Eulerian modelling of a fixed-bed system under low primary air conditions," Renewable Energy, Elsevier, vol. 215(C).
    8. Wang, Junlei & Zhang, Chengyun & Hu, Guobiao & Liu, Xiaowei & Liu, Huadong & Zhang, Zhien & Das, Raj, 2022. "Wake galloping energy harvesting in heat exchange systems under the influence of ash deposition," Energy, Elsevier, vol. 253(C).
    9. Yuan, Zhenhua & Chen, Zhichao & Zhang, Bo & Gao, Xuelin & Li, Jiawei & Qiao, Yanyu & Li, Zhengqi, 2023. "Study on the slagging trends of the pre-combustion chamber in industrial pulverized coal boiler under different excess air coefficients by CFD numerical simulation," Energy, Elsevier, vol. 264(C).
    10. Yin, Chungen, 2020. "Development in biomass preparation for suspension firing towards higher biomass shares and better boiler performance and fuel rangeability," Energy, Elsevier, vol. 196(C).
    11. Zeng, Guang & Xu, Mingchen & Tu, Yaojie & Li, Zhenwei & Cai, Yongtie & Zheng, Zhimin & Tay, Kunlin & Yang, Wenming, 2020. "Influences of initial coal concentration on ignition behaviors of low-NOx bias combustion technology," Applied Energy, Elsevier, vol. 278(C).
    12. Lim, Jonghun & Kim, Junghwan, 2022. "Optimizing ash deposit removal system to maximize biomass recycling as renewable energy for CO2 reduction," Renewable Energy, Elsevier, vol. 190(C), pages 1006-1017.
    13. Li, Fenghai & Li, Yang & Fan, Hongli & Wang, Tao & Guo, Mingxi & Fang, Yitian, 2019. "Investigation on fusion characteristics of deposition from biomass vibrating grate furnace combustion and its modification," Energy, Elsevier, vol. 174(C), pages 724-734.
    14. Laura Canale & Anna Rita Di Fazio & Mario Russo & Andrea Frattolillo & Marco Dell’Isola, 2021. "An Overview on Functional Integration of Hybrid Renewable Energy Systems in Multi-Energy Buildings," Energies, MDPI, vol. 14(4), pages 1-33, February.
    15. Chen, Guanyi & Wenga, Terrence & Ma, Wenchao & Lin, Fawei, 2019. "Theoretical and experimental study of gas-phase corrosion attack of Fe under simulated municipal solid waste combustion: Influence of KCl, SO2, HCl, and H2O vapour," Applied Energy, Elsevier, vol. 247(C), pages 630-642.
    16. Dan Yu & Caihong Zhang & Siyi Wang & Lan Zhang, 2023. "Evolutionary Game and Simulation Analysis of Power Plant and Government Behavior Strategies in the Coupled Power Generation Industry of Agricultural and Forestry Biomass and Coal," Energies, MDPI, vol. 16(3), pages 1-19, February.
    17. Halil Akbaş & Gültekin Özdemir, 2020. "An Integrated Prediction and Optimization Model of a Thermal Energy Production System in a Factory Producing Furniture Components," Energies, MDPI, vol. 13(22), pages 1-29, November.
    18. Kanmaniraja Radhakrishnan & Jun Su Park, 2024. "Flow and Heat Transfer Characteristics of Superheater Tube of a Pulverized Coal-Fired Boiler Using Conjugate Heat Transfer Modeling," Energies, MDPI, vol. 17(5), pages 1-20, February.
    19. Yongtie, Cai & Zhimin, Zheng & Guang, Zeng & Wen, Wen & Lei, Luo & Wenming, Yang, 2022. "Quantitative phase analysis and rietveld texture determination of minerals in ash deposits in a 11.2 MW moving grate boiler," Energy, Elsevier, vol. 255(C).
    20. Hernik, Bartłomiej & Wnorowska, Joanna, 2022. "Numerical research on combustion processes and deposit formation on the deposition probe in the pulverized drop chamber," Renewable Energy, Elsevier, vol. 187(C), pages 1-13.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:261:y:2022:i:pa:s0360544222021387. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.