IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v240y2022ics0360544221030528.html
   My bibliography  Save this article

Pseudo counter-current turbulent fluidized bed process with sensible heat recovery for energy-efficient CO2 capture using an amine-functionalized solid sorbent

Author

Listed:
  • Jung, Wonho
  • Lee, Jinwon

Abstract

A fluidized bed adsorption (FLBA) process with internal heat integration is considered an energy-efficient method for large-scale CO2 capture. Herein, we propose a pseudo counter-current FLBA process for post-combustion CO2 capture as a proof-of-concept based on a rationally designed moving bed heat exchanger by incorporating the internal heat integration concept of the conventional amine scrubbing CO2 capture process. The proposed FLBA process consists of an adsorption bed, desorption bed, and moving bed heat exchangers for cooling and heating the solid sorbent. The design of the proposed FLBA process enables internal heat integration by recovering sensible heat from the cooling process. Furthermore, by installing multiple adsorption processes, the pseudo counter-current operation in the adsorption bed enhances the CO2 cyclic capacity of the amine-functionalized solid sorbent with high CO2 recovery. The proposed process complements the two weaknesses of FLBA, namely, large sensible heat and low cyclic capacity of the sorbent. The energy analysis, based on rigorous mathematical modeling, estimates that the energy demand of the optimized FLBA using SiO2/0.37 EB-PEI is approximately 258.6 kWh/t-CO2 with 45% sensible heat recovery. This low energy demand is comparable to that of the most mature amine-based absorption process (271 kWh/t-CO2) owing to the effect of internal heat integration, supporting the feasibility of the FLBA process for post-combustion CO2 capture.

Suggested Citation

  • Jung, Wonho & Lee, Jinwon, 2022. "Pseudo counter-current turbulent fluidized bed process with sensible heat recovery for energy-efficient CO2 capture using an amine-functionalized solid sorbent," Energy, Elsevier, vol. 240(C).
    • Handle: RePEc:eee:energy:v:240:y:2022:i:c:s0360544221030528
    DOI: 10.1016/j.energy.2021.122803
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221030528
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.122803?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jung, Wonho & Park, Junhyung & Won, Wangyun & Lee, Kwang Soon, 2018. "Simulated moving bed adsorption process based on a polyethylenimine-silica sorbent for CO2 capture with sensible heat recovery," Energy, Elsevier, vol. 150(C), pages 950-964.
    2. Moon, Hokyu & Yoo, Hoanju & Seo, Hwimin & Park, Yong-Ki & Cho, Hyung Hee, 2015. "Thermal design of heat-exchangeable reactors using a dry-sorbent CO2 capture multi-step process," Energy, Elsevier, vol. 84(C), pages 704-713.
    3. Park, Junhyung & Won, Wangyun & Jung, Wonho & Lee, Kwang Soon, 2019. "One-dimensional modeling of a turbulent fluidized bed for a sorbent-based CO2 capture process with solid–solid sensible heat exchange," Energy, Elsevier, vol. 168(C), pages 1168-1180.
    4. Ortiz, C. & Chacartegui, R. & Valverde, J.M. & Becerra, J.A., 2016. "A new integration model of the calcium looping technology into coal fired power plants for CO2 capture," Applied Energy, Elsevier, vol. 169(C), pages 408-420.
    5. Breault, Ronald W. & Huckaby, E. David, 2013. "Parametric behavior of a CO2 capture process: CFD simulation of solid-sorbent CO2 absorption in a riser reactor," Applied Energy, Elsevier, vol. 112(C), pages 224-234.
    6. Woosung Choi & Kyungmin Min & Chaehoon Kim & Young Soo Ko & Jae Wan Jeon & Hwimin Seo & Yong-Ki Park & Minkee Choi, 2016. "Epoxide-functionalization of polyethyleneimine for synthesis of stable carbon dioxide adsorbent in temperature swing adsorption," Nature Communications, Nature, vol. 7(1), pages 1-8, November.
    7. Duan, Liqiang & Feng, Tao & Jia, Shilun & Yu, Xiaohui, 2016. "Study on the performance of coal-fired power plant integrated with Ca-looping CO2 capture system with recarbonation process," Energy, Elsevier, vol. 115(P1), pages 942-953.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shukla, Hari & Hembram, Bidesh Kumar & Vishal, Vikram & Trivedi, Japan & Srivastava, Vimal Chandra & Sharma, Tushar, 2024. "Surface modified single-step nanofluid for improved CO2 absorption and storage Prospects at pore-scale in micromodels: CO2 utilization for saline porous media," Energy, Elsevier, vol. 294(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Park, Junhyung & Won, Wangyun & Jung, Wonho & Lee, Kwang Soon, 2019. "One-dimensional modeling of a turbulent fluidized bed for a sorbent-based CO2 capture process with solid–solid sensible heat exchange," Energy, Elsevier, vol. 168(C), pages 1168-1180.
    2. Jung, Wonho & Lee, Kwang Soon, 2019. "Novel short-cut estimation method for the optimum total energy demand of solid sorbents in an adsorption-based CO2 capture process," Energy, Elsevier, vol. 180(C), pages 640-648.
    3. Jung, Wonho & Lee, Jinwon, 2022. "Economic evaluation for four different solid sorbent processes with heat integration for energy-efficient CO2 capture based on PEI-silica sorbent," Energy, Elsevier, vol. 238(PC).
    4. Li, Shuangjun & Yuan, Xiangzhou & Deng, Shuai & Zhao, Li & Lee, Ki Bong, 2021. "A review on biomass-derived CO2 adsorption capture: Adsorbent, adsorber, adsorption, and advice," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    5. Vogtenhuber, H. & Hofmann, R. & Helminger, F. & Schöny, G., 2018. "Process simulation of an efficient temperature swing adsorption concept for biogas upgrading," Energy, Elsevier, vol. 162(C), pages 200-209.
    6. Nam, Hyungseok & Won, Yooseob & Kim, Jae-Young & Yi, Chang-Keun & Park, Young Cheol & Woo, Jae Min & Jung, Su-Yeong & Jin, Gyoung-Tae & Jo, Sung-Ho & Lee, Seung-Yong & Kim, Hyunuk & Park, Jaehyeon, 2020. "Hydrodynamics and heat transfer coefficients during CO2 carbonation reaction in a circulated fluidized bed reactor using 200 kg potassium-based dry sorbent," Energy, Elsevier, vol. 193(C).
    7. Choi, Seungyeong & Yun, Maroosol & Kim, Kiwoong & Park, Yong-Ki & Cho, Hyung Hee, 2022. "Energy-efficient design of dual circulating fluidized bed system for CCUS by multi-tube configuration with junctions," Energy, Elsevier, vol. 245(C).
    8. Hanak, Dawid P. & Jenkins, Barrie G. & Kruger, Tim & Manovic, Vasilije, 2017. "High-efficiency negative-carbon emission power generation from integrated solid-oxide fuel cell and calciner," Applied Energy, Elsevier, vol. 205(C), pages 1189-1201.
    9. Choe, Bomin & Lee, Shinje & Won, Wangyun, 2020. "Process integration and optimization for economical production of commodity chemicals from lignocellulosic biomass," Renewable Energy, Elsevier, vol. 162(C), pages 242-248.
    10. Lisbona, Pilar & Bailera, Manuel & Hills, Thomas & Sceats, Mark & Díez, Luis I. & Romeo, Luis M., 2020. "Energy consumption minimization for a solar lime calciner operating in a concentrated solar power plant for thermal energy storage," Renewable Energy, Elsevier, vol. 156(C), pages 1019-1027.
    11. Zhao, Bingtao & Su, Yaxin & Tao, Wenwen, 2014. "Mass transfer performance of CO2 capture in rotating packed bed: Dimensionless modeling and intelligent prediction," Applied Energy, Elsevier, vol. 136(C), pages 132-142.
    12. Zhang, Xuelei & Zhang, Zhuoyuan & Wang, Gaofeng, 2023. "Thermodynamic and economic investigation of a novel combined cycle in coal-fired power plant with CO2 capture via Ca-looping," Energy, Elsevier, vol. 263(PB).
    13. Xin Sun & Xuehua Shen & Hao Wang & Feng Yan & Jiali Hua & Guanghuan Li & Zuotai Zhang, 2024. "Atom-level interaction design between amines and support for achieving efficient and stable CO2 capture," Nature Communications, Nature, vol. 15(1), pages 1-10, December.
    14. Yang, Yan & Wen, Chuang & Wang, Shuli & Feng, Yuqing, 2014. "Theoretical and numerical analysis on pressure recovery of supersonic separators for natural gas dehydration," Applied Energy, Elsevier, vol. 132(C), pages 248-253.
    15. Luis Míguez, José & Porteiro, Jacobo & Pérez-Orozco, Raquel & Patiño, David & Rodríguez, Sandra, 2018. "Evolution of CO2 capture technology between 2007 and 2017 through the study of patent activity," Applied Energy, Elsevier, vol. 211(C), pages 1282-1296.
    16. Yaumi, A.L. & Bakar, M.Z. Abu & Hameed, B.H., 2017. "Reusable nitrogen-doped mesoporous carbon adsorbent for carbon dioxide adsorption in fixed-bed," Energy, Elsevier, vol. 138(C), pages 776-784.
    17. Yang, Ning & Zhou, Yunlong & Ge, Xinzhe, 2019. "A flexible CO2 capture operation scheme design and evaluation of a coal-fired power plant integrated with a novel DCP and retrofitted solar system," Energy, Elsevier, vol. 170(C), pages 73-84.
    18. Iloeje, Chukwunwike O. & Zhao, Zhenlong & Ghoniem, Ahmed F., 2018. "Design and techno-economic optimization of a rotary chemical looping combustion power plant with CO2 capture," Applied Energy, Elsevier, vol. 231(C), pages 1179-1190.
    19. Yang, Chuanruo & Du, Zhilin & Jin, Junsu & Chen, Jian & Mi, Jianguo, 2020. "Epoxide-functionalized tetraethylenepentamine encapsulated into porous copolymer spheres for CO2 capture with superior stability," Applied Energy, Elsevier, vol. 260(C).
    20. Khosravi, Soheil & Neshat, Elaheh & Saray, Rahim Khoshbakhti, 2023. "Thermodynamic analysis of a sorption-enhanced gasification process of municipal solid waste, integrated with concentrated solar power and thermal energy storage systems for co-generation of power and ," Renewable Energy, Elsevier, vol. 214(C), pages 140-153.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:240:y:2022:i:c:s0360544221030528. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.