IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v168y2019icp1168-1180.html
   My bibliography  Save this article

One-dimensional modeling of a turbulent fluidized bed for a sorbent-based CO2 capture process with solid–solid sensible heat exchange

Author

Listed:
  • Park, Junhyung
  • Won, Wangyun
  • Jung, Wonho
  • Lee, Kwang Soon

Abstract

A one-dimensional model for a turbulent fluidized bed is proposed and applied to the analysis of a CO2 capture process using a polyethylenimine (PEI)-silica sorbent. A formula for the contact efficiency was derived from the kinetic equation of the sorbent and the Kunii–Levenspiel core–shell model. Axial profiles of the gas and solid phase CO2 concentrations and bed temperature were computed, and the energy demand for CO2 capture was assessed for different degrees of sensible heat recovery.

Suggested Citation

  • Park, Junhyung & Won, Wangyun & Jung, Wonho & Lee, Kwang Soon, 2019. "One-dimensional modeling of a turbulent fluidized bed for a sorbent-based CO2 capture process with solid–solid sensible heat exchange," Energy, Elsevier, vol. 168(C), pages 1168-1180.
    • Handle: RePEc:eee:energy:v:168:y:2019:i:c:p:1168-1180
    DOI: 10.1016/j.energy.2018.11.152
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218323636
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.11.152?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jung, Wonho & Park, Junhyung & Won, Wangyun & Lee, Kwang Soon, 2018. "Simulated moving bed adsorption process based on a polyethylenimine-silica sorbent for CO2 capture with sensible heat recovery," Energy, Elsevier, vol. 150(C), pages 950-964.
    2. Moon, Hokyu & Yoo, Hoanju & Seo, Hwimin & Park, Yong-Ki & Cho, Hyung Hee, 2015. "Thermal design of heat-exchangeable reactors using a dry-sorbent CO2 capture multi-step process," Energy, Elsevier, vol. 84(C), pages 704-713.
    3. Thummakul, Theeranan & Gidaspow, Dimitri & Piumsomboon, Pornpote & Chalermsinsuwan, Benjapon, 2017. "CFD simulation of CO2 sorption on K2CO3 solid sorbent in novel high flux circulating-turbulent fluidized bed riser: Parametric statistical experimental design study," Applied Energy, Elsevier, vol. 190(C), pages 122-134.
    4. Ortiz, C. & Chacartegui, R. & Valverde, J.M. & Becerra, J.A., 2016. "A new integration model of the calcium looping technology into coal fired power plants for CO2 capture," Applied Energy, Elsevier, vol. 169(C), pages 408-420.
    5. Breault, Ronald W. & Huckaby, E. David, 2013. "Parametric behavior of a CO2 capture process: CFD simulation of solid-sorbent CO2 absorption in a riser reactor," Applied Energy, Elsevier, vol. 112(C), pages 224-234.
    6. Woosung Choi & Kyungmin Min & Chaehoon Kim & Young Soo Ko & Jae Wan Jeon & Hwimin Seo & Yong-Ki Park & Minkee Choi, 2016. "Epoxide-functionalization of polyethyleneimine for synthesis of stable carbon dioxide adsorbent in temperature swing adsorption," Nature Communications, Nature, vol. 7(1), pages 1-8, November.
    7. Goto, Kazuya & Yogo, Katsunori & Higashii, Takayuki, 2013. "A review of efficiency penalty in a coal-fired power plant with post-combustion CO2 capture," Applied Energy, Elsevier, vol. 111(C), pages 710-720.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jung, Wonho & Lee, Jinwon, 2022. "Economic evaluation for four different solid sorbent processes with heat integration for energy-efficient CO2 capture based on PEI-silica sorbent," Energy, Elsevier, vol. 238(PC).
    2. Li, Shuangjun & Yuan, Xiangzhou & Deng, Shuai & Zhao, Li & Lee, Ki Bong, 2021. "A review on biomass-derived CO2 adsorption capture: Adsorbent, adsorber, adsorption, and advice," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    3. Choi, Seungyeong & Yun, Maroosol & Kim, Kiwoong & Park, Yong-Ki & Cho, Hyung Hee, 2022. "Energy-efficient design of dual circulating fluidized bed system for CCUS by multi-tube configuration with junctions," Energy, Elsevier, vol. 245(C).
    4. Akinola, Toluleke E. & Bonilla Prado, Phebe L. & Wang, Meihong, 2022. "Experimental studies, molecular simulation and process modelling\simulation of adsorption-based post-combustion carbon capture for power plants: A state-of-the-art review," Applied Energy, Elsevier, vol. 317(C).
    5. Jung, Wonho & Lee, Jinwon, 2022. "Pseudo counter-current turbulent fluidized bed process with sensible heat recovery for energy-efficient CO2 capture using an amine-functionalized solid sorbent," Energy, Elsevier, vol. 240(C).
    6. Jung, Wonho & Lee, Kwang Soon, 2019. "Novel short-cut estimation method for the optimum total energy demand of solid sorbents in an adsorption-based CO2 capture process," Energy, Elsevier, vol. 180(C), pages 640-648.
    7. Nam, Hyungseok & Won, Yooseob & Kim, Jae-Young & Yi, Chang-Keun & Park, Young Cheol & Woo, Jae Min & Jung, Su-Yeong & Jin, Gyoung-Tae & Jo, Sung-Ho & Lee, Seung-Yong & Kim, Hyunuk & Park, Jaehyeon, 2020. "Hydrodynamics and heat transfer coefficients during CO2 carbonation reaction in a circulated fluidized bed reactor using 200 kg potassium-based dry sorbent," Energy, Elsevier, vol. 193(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jung, Wonho & Lee, Jinwon, 2022. "Pseudo counter-current turbulent fluidized bed process with sensible heat recovery for energy-efficient CO2 capture using an amine-functionalized solid sorbent," Energy, Elsevier, vol. 240(C).
    2. Choi, Seungyeong & Yun, Maroosol & Kim, Kiwoong & Park, Yong-Ki & Cho, Hyung Hee, 2022. "Energy-efficient design of dual circulating fluidized bed system for CCUS by multi-tube configuration with junctions," Energy, Elsevier, vol. 245(C).
    3. Vogtenhuber, H. & Hofmann, R. & Helminger, F. & Schöny, G., 2018. "Process simulation of an efficient temperature swing adsorption concept for biogas upgrading," Energy, Elsevier, vol. 162(C), pages 200-209.
    4. Jung, Wonho & Lee, Kwang Soon, 2019. "Novel short-cut estimation method for the optimum total energy demand of solid sorbents in an adsorption-based CO2 capture process," Energy, Elsevier, vol. 180(C), pages 640-648.
    5. Jung, Wonho & Lee, Jinwon, 2022. "Economic evaluation for four different solid sorbent processes with heat integration for energy-efficient CO2 capture based on PEI-silica sorbent," Energy, Elsevier, vol. 238(PC).
    6. Yang, Ning & Zhou, Yunlong & Ge, Xinzhe, 2019. "A flexible CO2 capture operation scheme design and evaluation of a coal-fired power plant integrated with a novel DCP and retrofitted solar system," Energy, Elsevier, vol. 170(C), pages 73-84.
    7. Ortiz, C. & Valverde, J.M. & Chacartegui, R. & Benítez-Guerrero, M. & Perejón, A. & Romeo, L.M., 2017. "The Oxy-CaL process: A novel CO2 capture system by integrating partial oxy-combustion with the Calcium-Looping process," Applied Energy, Elsevier, vol. 196(C), pages 1-17.
    8. Xu, Yin & Jin, Baosheng & Zhao, Yongling & Hu, Eric J. & Chen, Xiaole & Li, Xiaochuan, 2018. "Numerical simulation of aqueous ammonia-based CO2 absorption in a sprayer tower: An integrated model combining gas-liquid hydrodynamics and chemistry," Applied Energy, Elsevier, vol. 211(C), pages 318-333.
    9. Zhang, Xiaowen & Zhang, Rui & Liu, Helei & Gao, Hongxia & Liang, Zhiwu, 2018. "Evaluating CO2 desorption performance in CO2-loaded aqueous tri-solvent blend amines with and without solid acid catalysts," Applied Energy, Elsevier, vol. 218(C), pages 417-429.
    10. Aikifa Raza & Jin-You Lu & Safa Alzaim & Hongxia Li & TieJun Zhang, 2018. "Novel Receiver-Enhanced Solar Vapor Generation: Review and Perspectives," Energies, MDPI, vol. 11(1), pages 1-29, January.
    11. Muhammad Asif & Muhammad Suleman & Ihtishamul Haq & Syed Asad Jamal, 2018. "Post‐combustion CO2 capture with chemical absorption and hybrid system: current status and challenges," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 8(6), pages 998-1031, December.
    12. Wang, Fu & Zhao, Jun & Zhang, Houcheng & Miao, He & Zhao, Jiapei & Wang, Jiatang & Yuan, Jinliang & Yan, Jinyue, 2018. "Efficiency evaluation of a coal-fired power plant integrated with chilled ammonia process using an absorption refrigerator," Applied Energy, Elsevier, vol. 230(C), pages 267-276.
    13. Hanak, Dawid P. & Jenkins, Barrie G. & Kruger, Tim & Manovic, Vasilije, 2017. "High-efficiency negative-carbon emission power generation from integrated solid-oxide fuel cell and calciner," Applied Energy, Elsevier, vol. 205(C), pages 1189-1201.
    14. Olumayegun, Olumide & Wang, Meihong & Oko, Eni, 2019. "Thermodynamic performance evaluation of supercritical CO2 closed Brayton cycles for coal-fired power generation with solvent-based CO2 capture," Energy, Elsevier, vol. 166(C), pages 1074-1088.
    15. Li, Chunxi & Guo, Shiqi & Ye, Xuemin & Fu, Wenfeng, 2019. "Performance and thermoeconomics of solar-aided double-reheat coal-fired power systems with carbon capture," Energy, Elsevier, vol. 177(C), pages 1-15.
    16. Tamura, Masato & Gotou, Takahiro & Ishii, Hiroki & Riechelmann, Dirk, 2020. "Experimental investigation of ammonia combustion in a bench scale 1.2 MW-thermal pulverised coal firing furnace," Applied Energy, Elsevier, vol. 277(C).
    17. Li, Jichao & Han, Wei & Li, Peijing & Ma, Wenjing & Xue, Xiaodong & Jin, Hongguang, 2023. "High-efficiency power generation system with CO2 capture based on cascading coal gasification employing chemical recuperation," Energy, Elsevier, vol. 283(C).
    18. Li, Shuangjun & Deng, Shuai & Zhao, Li & Zhao, Ruikai & Yuan, Xiangzhou, 2021. "Thermodynamic carbon pump 2.0: Elucidating energy efficiency through the thermodynamic cycle," Energy, Elsevier, vol. 215(PB).
    19. Zhang, Xiaowen & Zhang, Xin & Liu, Helei & Li, Wensheng & Xiao, Min & Gao, Hongxia & Liang, Zhiwu, 2017. "Reduction of energy requirement of CO2 desorption from a rich CO2-loaded MEA solution by using solid acid catalysts," Applied Energy, Elsevier, vol. 202(C), pages 673-684.
    20. Brenda Raho & Gianpiero Colangelo & Marco Milanese & Arturo de Risi, 2022. "A Critical Analysis of the Oxy-Combustion Process: From Mathematical Models to Combustion Product Analysis," Energies, MDPI, vol. 15(18), pages 1-25, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:168:y:2019:i:c:p:1168-1180. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.