IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v229y2021ics0360544221009130.html
   My bibliography  Save this article

Electrical–mechanical evaluation of the multi–cascaded induction motors under different conditions

Author

Listed:
  • Guo, Jingquan
  • Ma, Xinqiang
  • Ahmadpour, Ali

Abstract

This article pays particular attention on the operation and process of energy conversion in cascaded induction motors worked under balance and unbalance circumstances. In this study, we considered the multi induction motors, which are coupled as mechanically in form of cascade mode with the same capacity. Moreover, a Single Induction Motor (SIM), which its capacity is sum of the capacity of all Multi–Cascaded Induction Motors (MCIMs), are considered for comparing the results. In operation time, unbalancing can be happen in the individual of the given voltage and frequency. The effects of the balance voltage and unbalanced frequency on highest and stable torque, power factor, active as well as reactive input powers, ohm losses, and finally, Total Harmonic Distortion (THD) in current and voltage have been examined. This study shows that motor operation and effectiveness are enhanced by presenting more electrical benefits of the MCIMs. The results depicts the highest torque of MCIMs in comparison with SIMs. In addition, the copper loss is decreased when the MCIM is used instead of SIM. As a result, the energy conversion procedure were remarkably enhanced.

Suggested Citation

  • Guo, Jingquan & Ma, Xinqiang & Ahmadpour, Ali, 2021. "Electrical–mechanical evaluation of the multi–cascaded induction motors under different conditions," Energy, Elsevier, vol. 229(C).
    • Handle: RePEc:eee:energy:v:229:y:2021:i:c:s0360544221009130
    DOI: 10.1016/j.energy.2021.120664
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221009130
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.120664?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ahmadpour, Ali & Mokaramian, Elham & Anderson, Simon, 2021. "The effects of the renewable energies penetration on the surplus welfare under energy policy," Renewable Energy, Elsevier, vol. 164(C), pages 1171-1182.
    2. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    3. Sakthivel, V.P. & Subramanian, S., 2011. "On-site efficiency evaluation of three-phase induction motor based on particle swarm optimization," Energy, Elsevier, vol. 36(3), pages 1713-1720.
    4. Paul Waide & Conrad U. Brunner, 2011. "Energy-Efficiency Policy Opportunities for Electric Motor-Driven Systems," IEA Energy Papers 2011/7, OECD Publishing.
    5. El-Kharashi, Eyhab & El-Dessouki, Maher, 2014. "Coupling induction motors to improve the energy conversion process during balanced and unbalanced operation," Energy, Elsevier, vol. 65(C), pages 511-516.
    6. Cheng, Yuk-Shing & Li, Raymond & Woo, Chi-Keung, 2021. "Regional energy-growth nexus and energy conservation policy in China," Energy, Elsevier, vol. 217(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. El-Kharashi, Eyhab & Massoud, Joseph Girgis & Al-Ahmar, M.A., 2019. "The impact of the unbalance in both the voltage and the frequency on the performance of single and cascaded induction motors," Energy, Elsevier, vol. 181(C), pages 561-575.
    2. El-Kharashi, Eyhab, 2014. "Detailed comparative study regarding different formulae of predicting the iron losses in a machine excited by non-sinusoidal supply," Energy, Elsevier, vol. 73(C), pages 513-522.
    3. Bortoni, Edson C. & Magalhães, Leonardo P. & Nogueira, Luiz A.H. & Bajay, Sérgio V. & Cassula, Agnelo M., 2020. "An assessment of energy efficient motors application by scenarios evaluation," Energy Policy, Elsevier, vol. 140(C).
    4. Sauer, Ildo L. & Tatizawa, Hédio & Salotti, Francisco A.M. & Mercedes, Sonia S., 2015. "A comparative assessment of Brazilian electric motors performance with minimum efficiency standards," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 308-318.
    5. El-Kharashi, Eyhab & El-Dessouki, Maher, 2014. "Coupling induction motors to improve the energy conversion process during balanced and unbalanced operation," Energy, Elsevier, vol. 65(C), pages 511-516.
    6. Julio R. Gómez & Enrique C. Quispe & Rosaura del Pilar Castrillón & Percy R. Viego, 2020. "Identification of Technoeconomic Opportunities with the Use of Premium Efficiency Motors as Alternative for Developing Countries," Energies, MDPI, vol. 13(20), pages 1-16, October.
    7. Lei, Fei & Du, Bin & Liu, Xin & Xie, Xiaoping & Chai, Tian, 2016. "Optimization of an implicit constrained multi-physics system for motor wheels of electric vehicle," Energy, Elsevier, vol. 113(C), pages 980-990.
    8. Prince, & Hati, Ananda Shankar, 2021. "A comprehensive review of energy-efficiency of ventilation system using Artificial Intelligence," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    9. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    10. Lei, Fei & Gu, Ke & Du, Bin & Xie, Xiaoping, 2017. "Comprehensive global optimization of an implicit constrained multi-physics system for electric vehicles with in-wheel motors," Energy, Elsevier, vol. 139(C), pages 523-534.
    11. Gómez, Julio R. & Sousa, Vladimir & Cabello Eras, Juan J. & Sagastume Gutiérrez, Alexis & Viego, Percy R. & Quispe, Enrique C. & de León, Gabriel, 2022. "Assessment criteria of the feasibility of replacement standard efficiency electric motors with high-efficiency motors," Energy, Elsevier, vol. 239(PA).
    12. Mollik, Sazib & Rashid, M.M. & Hasanuzzaman, M. & Karim, M.E. & Hosenuzzaman, M., 2016. "Prospects, progress, policies, and effects of rural electrification in Bangladesh," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 553-567.
    13. Muthu Kumaran Gunasegaran & Md Hasanuzzaman & ChiaKwang Tan & Ab Halim Abu Bakar & Vignes Ponniah, 2022. "Energy Analysis, Building Energy Index and Energy Management Strategies for Fast-Food Restaurants in Malaysia," Sustainability, MDPI, vol. 14(20), pages 1-18, October.
    14. Fernández Oro, J.M. & Barrio Perotti, R. & Galdo Vega, M. & González, J., 2023. "Effect of the radial gap size on the deterministic flow in a centrifugal pump due to impeller-tongue interactions," Energy, Elsevier, vol. 278(PA).
    15. Sousa Santos, Vladimir & Cabello Eras, Juan J. & Cabello Ulloa, Mario J., 2024. "Evaluation of the energy saving potential in electric motors applying a load-based voltage control method," Energy, Elsevier, vol. 303(C).
    16. Wei Chen & Yongle Tian & Kaiming Zheng & Nana Wan, 2023. "Influences of mechanisms on investment in renewable energy storage equipment," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(11), pages 12569-12595, November.
    17. Nogueira Vilanova, Mateus Ricardo & Perrella Balestieri, José Antônio, 2014. "Energy and hydraulic efficiency in conventional water supply systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 701-714.
    18. de Almeida, Anibal T. & Fong, Joao & Falkner, Hugh & Bertoldi, Paolo, 2017. "Policy options to promote energy efficient electric motors and drives in the EU," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 1275-1286.
    19. Lei, Fei & Bai, Yingchun & Zhu, Wenhao & Liu, Jinhong, 2019. "A novel approach for electric powertrain optimization considering vehicle power performance, energy consumption and ride comfort," Energy, Elsevier, vol. 167(C), pages 1040-1050.
    20. Zi-Qiang Zhu & Dawei Liang, 2022. "Perspective of Thermal Analysis and Management for Permanent Magnet Machines, with Particular Reference to Hotspot Temperatures," Energies, MDPI, vol. 15(21), pages 1-51, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:229:y:2021:i:c:s0360544221009130. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.