IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v212y2020ics0360544220318788.html
   My bibliography  Save this article

Oxygen-enriched gasification of lignocellulosic biomass: Syngas analysis, physicochemical characteristics of the carbon-rich material and its utilization as an anode in lithium ion battery

Author

Listed:
  • Chen, Tianju
  • Zhang, Juan
  • Wang, Zhiqi
  • Zhao, Ruidong
  • He, Jianjiang
  • Wu, Jinhu
  • Qin, Jianguang

Abstract

Syngas from conventional biomass gasification has low calorific value, low H2/CO ratio, and high tar content. Oxygen and steam gasification are effective ways to improve the quality of syngas. Gas-carbon co-generation is possible due to the lower temperature at the bottom of the downdraft fixed-bed gasifier. Oxygen-enriched gasification of biomass is investigated in this work. The H2 content in the syngas increased from 34 v% to 45 v% when steam was added. The physicochemical characteristics of the activation carbon (AC) are determined by the Brunauer-Emmett-Teller (BET), Raman, Fourier transform infrared spectrometry (FTIR), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscope (TEM). In addition, the AC from the activation of carbon-rich production used as anode in lithium ion batteries (LIBs) is attempted. The BET of the ACo and ACo-s is 1715.32 m2 g−1 and 1409.02 m2 g−1, respectively. The biomass-derived carbon material had less graphitic crystalline structure, less functional groups and graphene-like porous structure after activation. At the current density of 100 mA g−1, a reversible lithium storage capacity of 327 mAh g−1 for a carbon-based electrode is obtained. This research provides a new roadmap for high-value-added products from the thermo-chemical conversion of biomass.

Suggested Citation

  • Chen, Tianju & Zhang, Juan & Wang, Zhiqi & Zhao, Ruidong & He, Jianjiang & Wu, Jinhu & Qin, Jianguang, 2020. "Oxygen-enriched gasification of lignocellulosic biomass: Syngas analysis, physicochemical characteristics of the carbon-rich material and its utilization as an anode in lithium ion battery," Energy, Elsevier, vol. 212(C).
    • Handle: RePEc:eee:energy:v:212:y:2020:i:c:s0360544220318788
    DOI: 10.1016/j.energy.2020.118771
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220318788
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.118771?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bailera, Manuel & Lisbona, Pilar & Romeo, Luis M. & Espatolero, Sergio, 2017. "Power to Gas projects review: Lab, pilot and demo plants for storing renewable energy and CO2," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 292-312.
    2. Guandalini, Giulio & Campanari, Stefano & Romano, Matteo C., 2015. "Power-to-gas plants and gas turbines for improved wind energy dispatchability: Energy and economic assessment," Applied Energy, Elsevier, vol. 147(C), pages 117-130.
    3. Zhou, Chunguang & Rosén, Christer & Engvall, Klas, 2016. "Biomass oxygen/steam gasification in a pressurized bubbling fluidized bed: Agglomeration behavior," Applied Energy, Elsevier, vol. 172(C), pages 230-250.
    4. Jianjiang He & Ning Wang & Zili Cui & Huiping Du & Lin Fu & Changshui Huang & Ze Yang & Xiangyan Shen & Yuanping Yi & Zeyi Tu & Yuliang Li, 2017. "Hydrogen substituted graphdiyne as carbon-rich flexible electrode for lithium and sodium ion batteries," Nature Communications, Nature, vol. 8(1), pages 1-11, December.
    5. Sansaniwal, S.K. & Rosen, M.A. & Tyagi, S.K., 2017. "Global challenges in the sustainable development of biomass gasification: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 23-43.
    6. Cai, Junmeng & He, Yifeng & Yu, Xi & Banks, Scott W. & Yang, Yang & Zhang, Xingguang & Yu, Yang & Liu, Ronghou & Bridgwater, Anthony V., 2017. "Review of physicochemical properties and analytical characterization of lignocellulosic biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 309-322.
    7. Fangcai Zheng & Yang Yang & Qianwang Chen, 2014. "High lithium anodic performance of highly nitrogen-doped porous carbon prepared from a metal-organic framework," Nature Communications, Nature, vol. 5(1), pages 1-10, December.
    8. Fan, Xiaoxu & Yang, Liguo & Jiang, Jianguo, 2020. "Experimental study on industrial-scale CFB biomass gasification," Renewable Energy, Elsevier, vol. 158(C), pages 32-36.
    9. Yao, Zhiyi & You, Siming & Ge, Tianshu & Wang, Chi-Hwa, 2018. "Biomass gasification for syngas and biochar co-production: Energy application and economic evaluation," Applied Energy, Elsevier, vol. 209(C), pages 43-55.
    10. Ma, Zhuo & Wang, Kaixuan & Qiu, Yunfeng & Liu, Xizheng & Cao, Changyan & Feng, Yujie & Hu, PingAn, 2018. "Nitrogen and sulfur co-doped porous carbon derived from bio-waste as a promising electrocatalyst for zinc-air battery," Energy, Elsevier, vol. 143(C), pages 43-55.
    11. Al-Rahbi, Amal S. & Williams, Paul T., 2017. "Hydrogen-rich syngas production and tar removal from biomass gasification using sacrificial tyre pyrolysis char," Applied Energy, Elsevier, vol. 190(C), pages 501-509.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Clemens Schmittmann & Peter Quicker, 2024. "CO 2 Conversion by Oxygen-Enriched Gasification of Wood Chips," Energies, MDPI, vol. 17(19), pages 1-11, October.
    2. Yang, Shiliang & Liang, Jin & Wang, Shuai & Wang, Hua, 2021. "High-fidelity investigation of thermochemical conversion of biomass material in a full-loop circulating fluidized bed gasifier," Energy, Elsevier, vol. 224(C).
    3. Liu, Hongwei & Wang, Yongzhen & Lv, Liang & Liu, Xiao & Wang, Ziqi & Liu, Jun, 2023. "Oxygen-enriched hierarchical porous carbons derived from lignite for high-performance supercapacitors," Energy, Elsevier, vol. 269(C).
    4. He, Yifeng & Liu, Ronghou & Yellezuome, Dominic & Peng, Wanxi & Tabatabaei, Meisam, 2022. "Upgrading of biomass-derived bio-oil via catalytic hydrogenation with Rh and Pd catalysts," Renewable Energy, Elsevier, vol. 184(C), pages 487-497.
    5. Małgorzata Sieradzka & Agata Mlonka-Mędrala & Izabela Kalemba-Rec & Markus Reinmöller & Felix Küster & Wojciech Kalawa & Aneta Magdziarz, 2022. "Evaluation of Physical and Chemical Properties of Residue from Gasification of Biomass Wastes," Energies, MDPI, vol. 15(10), pages 1-19, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. AlNouss, Ahmed & McKay, Gordon & Al-Ansari, Tareq, 2020. "Enhancing waste to hydrogen production through biomass feedstock blending: A techno-economic-environmental evaluation," Applied Energy, Elsevier, vol. 266(C).
    2. Fischer, David & Kaufmann, Florian & Hollinger, Raphael & Voglstätter, Christopher, 2018. "Real live demonstration of MPC for a power-to-gas plant," Applied Energy, Elsevier, vol. 228(C), pages 833-842.
    3. Li, Bo & Li, Xu & Su, Qingyu, 2022. "A system and game strategy for the isolated island electric-gas deeply coupled energy network," Applied Energy, Elsevier, vol. 306(PA).
    4. Bartela, Łukasz & Kotowicz, Janusz & Dubiel-Jurgaś, Klaudia, 2018. "Investment risk for biomass integrated gasification combined heat and power unit with an internal combustion engine and a Stirling engine," Energy, Elsevier, vol. 150(C), pages 601-616.
    5. AlNouss, Ahmed & Parthasarathy, Prakash & Shahbaz, Muhammad & Al-Ansari, Tareq & Mackey, Hamish & McKay, Gordon, 2020. "Techno-economic and sensitivity analysis of coconut coir pith-biomass gasification using ASPEN PLUS," Applied Energy, Elsevier, vol. 261(C).
    6. Strübing, Dietmar & Moeller, Andreas B. & Mößnang, Bettina & Lebuhn, Michael & Drewes, Jörg E. & Koch, Konrad, 2018. "Anaerobic thermophilic trickle bed reactor as a promising technology for flexible and demand-oriented H2/CO2 biomethanation," Applied Energy, Elsevier, vol. 232(C), pages 543-554.
    7. Inayat, Abrar & Raza, Mohsin, 2019. "District cooling system via renewable energy sources: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 107(C), pages 360-373.
    8. Li, Xu & Deng, Jianhua & Liu, Jichun, 2024. "A two-layer and three-stage dynamic demand response game model considering the out of sync response for gases generators," Renewable Energy, Elsevier, vol. 228(C).
    9. Quarton, Christopher J. & Samsatli, Sheila, 2018. "Power-to-gas for injection into the gas grid: What can we learn from real-life projects, economic assessments and systems modelling?," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 302-316.
    10. Zhang, Weiwei & Huang, Sheng & Wu, Shiyong & Wu, Youqing & Gao, Jinsheng, 2020. "Ash fusion characteristics and gasification activity during biomasses co-gasification process," Renewable Energy, Elsevier, vol. 147(P1), pages 1584-1594.
    11. González-Aparicio, I. & Kapetaki, Z. & Tzimas, E., 2018. "Wind energy and carbon dioxide utilisation as an alternative business model for energy producers: A case study in Spain," Applied Energy, Elsevier, vol. 222(C), pages 216-227.
    12. Eveloy, Valerie, 2019. "Hybridization of solid oxide electrolysis-based power-to-methane with oxyfuel combustion and carbon dioxide utilization for energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 550-571.
    13. Liemberger, Werner & Halmschlager, Daniel & Miltner, Martin & Harasek, Michael, 2019. "Efficient extraction of hydrogen transported as co-stream in the natural gas grid – The importance of process design," Applied Energy, Elsevier, vol. 233, pages 747-763.
    14. Ignacio, Luís Henrique da Silva & Santos, Pedro Eduardo de Almeida & Duarte, Carlos Antonio Ribeiro, 2019. "An experimental assessment of Eucalyptus urosemente energy potential for biomass production in Brazil," Renewable and Sustainable Energy Reviews, Elsevier, vol. 103(C), pages 361-369.
    15. Wang, Ligang & Pérez-Fortes, Mar & Madi, Hossein & Diethelm, Stefan & herle, Jan Van & Maréchal, François, 2018. "Optimal design of solid-oxide electrolyzer based power-to-methane systems: A comprehensive comparison between steam electrolysis and co-electrolysis," Applied Energy, Elsevier, vol. 211(C), pages 1060-1079.
    16. Zhang, Yaning & Ke, Cunfeng & Fu, Wenming & Cui, Yunlei & Rehan, Mirza Abdullah & Li, Bingxi, 2020. "Simulation of microwave-assisted gasification of biomass: A review," Renewable Energy, Elsevier, vol. 154(C), pages 488-496.
    17. Zhang, Heng & Hao, Zhenhua & Li, Junguo & Yang, Xin & Wang, Zhiqing & Liu, Zheyu & Huang, Jiejie & Zhang, Yongqi & Fang, Yitian, 2021. "Effect of coal ash additive on potassium fixation and melting behaviors of the mixture under simulated biomass gasification condition," Renewable Energy, Elsevier, vol. 168(C), pages 806-814.
    18. Frank, Elimar & Gorre, Jachin & Ruoss, Fabian & Friedl, Markus J., 2018. "Calculation and analysis of efficiencies and annual performances of Power-to-Gas systems," Applied Energy, Elsevier, vol. 218(C), pages 217-231.
    19. Ullah, Kifayat & Sharma, Vinod Kumar & Ahmad, Mushtaq & Lv, Pengmei & Krahl, Jurgen & Wang, Zhongming & Sofia,, 2018. "The insight views of advanced technologies and its application in bio-origin fuel synthesis from lignocellulose biomasses waste, a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3992-4008.
    20. Song, Guohui & Xiao, Jun & Yan, Chao & Gu, Haiming & Zhao, Hao, 2022. "Quality of gaseous biofuels: Statistical assessment and guidance on production technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:212:y:2020:i:c:s0360544220318788. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.