IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v150y2018icp601-616.html
   My bibliography  Save this article

Investment risk for biomass integrated gasification combined heat and power unit with an internal combustion engine and a Stirling engine

Author

Listed:
  • Bartela, Łukasz
  • Kotowicz, Janusz
  • Dubiel-Jurgaś, Klaudia

Abstract

In paper, the results of an analysis of the integration of a Stirling engine with a Biomass Integrated Gasification Combined Heat and Power system have been presented. The analyses were conducted for two systems: with and without Stirling engine. The priority for the power system is the utilization of waste biomass. In addition, the system produces electricity and heat for the municipal district heating network. The Stirling engine uses the high-temperature potential of the raw process gas. The use of an additional engine in the cogeneration system permitted an increase in the electricity production. Calculations were carried out for different degrees of gas cooling in the Stirling engine. The basic energy flows in the system, and the thermodynamic assessment indicators were determined. In the next step, the calculations were carried out to obtain the economic evaluation indices. The risk analysis was conducted using the Monte Carlo method. The main technical and economic risk factors concerning the implementation of the cogeneration technology were then identified. On the basis of the determined cumulative probability curves used for obtaining the specified values of the Net Present Value Ratio, the values of the defined indices of the investment risk assessment could then be obtained.

Suggested Citation

  • Bartela, Łukasz & Kotowicz, Janusz & Dubiel-Jurgaś, Klaudia, 2018. "Investment risk for biomass integrated gasification combined heat and power unit with an internal combustion engine and a Stirling engine," Energy, Elsevier, vol. 150(C), pages 601-616.
    • Handle: RePEc:eee:energy:v:150:y:2018:i:c:p:601-616
    DOI: 10.1016/j.energy.2018.02.152
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218303864
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.02.152?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kotowicz, Janusz & Bartela, Łukasz, 2011. "The influence of the legal and economical environment and the profile of activities on the optimal design features of a natural-gas-fired combined heat and power plant," Energy, Elsevier, vol. 36(1), pages 328-338.
    2. Bartela, Łukasz & Skorek-Osikowska, Anna & Kotowicz, Janusz, 2015. "An analysis of the investment risk related to the integration of a supercritical coal-fired combined heat and power plant with an absorption installation for CO2 separation," Applied Energy, Elsevier, vol. 156(C), pages 423-435.
    3. Piterou, Athena & Shackley, Simon & Upham, Paul, 2008. "Project ARBRE: Lessons for bio-energy developers and policy-makers," Energy Policy, Elsevier, vol. 36(6), pages 2044-2050, June.
    4. Lund, Henrik, 2007. "Renewable energy strategies for sustainable development," Energy, Elsevier, vol. 32(6), pages 912-919.
    5. Valenti, G. & Silva, P. & Fergnani, N. & Campanari, S. & Ravidà, A. & Di Marcoberardino, G. & Macchi, E., 2015. "Experimental and numerical study of a micro-cogeneration Stirling unit under diverse conditions of the working fluid," Applied Energy, Elsevier, vol. 160(C), pages 920-929.
    6. Kalina, Jacek, 2016. "Complex thermal energy conversion systems for efficient use of locally available biomass," Energy, Elsevier, vol. 110(C), pages 105-115.
    7. Pierobon, Leonardo & Rokni, Masoud & Larsen, Ulrik & Haglind, Fredrik, 2013. "Thermodynamic analysis of an integrated gasification solid oxide fuel cell plant combined with an organic Rankine cycle," Renewable Energy, Elsevier, vol. 60(C), pages 226-234.
    8. Kotowicz, Janusz & Sobolewski, Aleksander & Iluk, Tomasz, 2013. "Energetic analysis of a system integrated with biomass gasification," Energy, Elsevier, vol. 52(C), pages 265-278.
    9. Sansaniwal, S.K. & Rosen, M.A. & Tyagi, S.K., 2017. "Global challenges in the sustainable development of biomass gasification: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 23-43.
    10. Werle, Sebastian & Wilk, Ryszard K., 2010. "A review of methods for the thermal utilization of sewage sludge: The Polish perspective," Renewable Energy, Elsevier, vol. 35(9), pages 1914-1919.
    11. Tokarski, Stanisław & Głód, Krzysztof & Ściążko, Marek & Zuwała, Jarosław, 2015. "Comparative assessment of the energy effects of biomass combustion and co-firing in selected technologies," Energy, Elsevier, vol. 92(P1), pages 24-32.
    12. Chmielewski, Adrian & Gumiński, Robert & Mączak, Jędrzej & Radkowski, Stanisław & Szulim, Przemysław, 2016. "Aspects of balanced development of RES and distributed micro-cogeneration use in Poland: Case study of a µCHP with Stirling engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 930-952.
    13. Chacartegui, R. & Sánchez, D. & Muñoz, J.M. & Sánchez, T., 2009. "Alternative ORC bottoming cycles FOR combined cycle power plants," Applied Energy, Elsevier, vol. 86(10), pages 2162-2170, October.
    14. Wang, Kai & Sanders, Seth R. & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2016. "Stirling cycle engines for recovering low and moderate temperature heat: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 89-108.
    15. Pérez-Navarro, A. & Alfonso, D. & Ariza, H.E. & Cárcel, J. & Correcher, A. & Escrivá-Escrivá, G. & Hurtado, E. & Ibáñez, F. & Peñalvo, E. & Roig, R. & Roldán, C. & Sánchez, C. & Segura, I. & Vargas, C, 2016. "Experimental verification of hybrid renewable systems as feasible energy sources," Renewable Energy, Elsevier, vol. 86(C), pages 384-391.
    16. Kraft, Stephan & Kirnbauer, Friedrich & Hofbauer, Hermann, 2017. "CPFD simulations of an industrial-sized dual fluidized bed steam gasification system of biomass with 8MW fuel input," Applied Energy, Elsevier, vol. 190(C), pages 408-420.
    17. González-Pino, I. & Pérez-Iribarren, E. & Campos-Celador, A. & Las-Heras-Casas, J. & Sala, J.M., 2015. "Influence of the regulation framework on the feasibility of a Stirling engine-based residential micro-CHP installation," Energy, Elsevier, vol. 84(C), pages 575-588.
    18. Sansaniwal, S.K. & Pal, K. & Rosen, M.A. & Tyagi, S.K., 2017. "Recent advances in the development of biomass gasification technology: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 363-384.
    19. Tańczuk, Mariusz & Ulbrich, Roman, 2013. "Implementation of a biomass-fired co-generation plant supplied with an ORC (Organic Rankine Cycle) as a heat source for small scale heat distribution system – A comparative analysis under Polish and G," Energy, Elsevier, vol. 62(C), pages 132-141.
    20. Skorek-Osikowska, Anna & Bartela, Łukasz & Kotowicz, Janusz & Sobolewski, Aleksander & Iluk, Tomasz & Remiorz, Leszek, 2014. "The influence of the size of the CHP (combined heat and power) system integrated with a biomass fueled gas generator and piston engine on the thermodynamic and economic effectiveness of electricity an," Energy, Elsevier, vol. 67(C), pages 328-340.
    21. Bartela, Łukasz & Kotowicz, Janusz & Remiorz, Leszek & Skorek-Osikowska, Anna & Dubiel, Klaudia, 2017. "Assessment of the economic appropriateness of the use of Stirling engine as additional part of a cogeneration system based on biomass gasification," Renewable Energy, Elsevier, vol. 112(C), pages 425-443.
    22. Skorek-Osikowska, Anna & Remiorz, Leszek & Bartela, Łukasz & Kotowicz, Janusz, 2017. "Potential for the use of micro-cogeneration prosumer systems based on the Stirling engine with an example in the Polish market," Energy, Elsevier, vol. 133(C), pages 46-61.
    23. Al-Rahbi, Amal S. & Williams, Paul T., 2017. "Hydrogen-rich syngas production and tar removal from biomass gasification using sacrificial tyre pyrolysis char," Applied Energy, Elsevier, vol. 190(C), pages 501-509.
    24. Kotowicz, Janusz & Bartela, Łukasz & Węcel, Daniel & Dubiel, Klaudia, 2017. "Hydrogen generator characteristics for storage of renewably-generated energy," Energy, Elsevier, vol. 118(C), pages 156-171.
    25. Qiu, Guoquan, 2012. "Selection of working fluids for micro-CHP systems with ORC," Renewable Energy, Elsevier, vol. 48(C), pages 565-570.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Al-Khori, Khalid & Bicer, Yusuf & Koç, Muammer, 2021. "Comparative techno-economic assessment of integrated PV-SOFC and PV-Battery hybrid system for natural gas processing plants," Energy, Elsevier, vol. 222(C).
    2. Wojciech Uchman & Janusz Kotowicz & Leszek Remiorz, 2020. "An Experimental Data-Driven Model of a Micro-Cogeneration Installation for Time-Domain Simulation and System Analysis," Energies, MDPI, vol. 13(11), pages 1-26, June.
    3. Carmela Perozziello & Lavinia Grosu & Bianca Maria Vaglieco, 2021. "Free-Piston Stirling Engine Technologies and Models: A Review," Energies, MDPI, vol. 14(21), pages 1-22, October.
    4. Ștefan-Dominic Voronca & Monica Siroux & George Darie, 2022. "Experimental Characterization of Transitory Functioning Regimes of a Biomass Stirling Micro-CHP," Energies, MDPI, vol. 15(15), pages 1-23, July.
    5. Du, Yan-dong & Zhou, Jia-le & Zhou, Xin-yue & Wu, Yang-wen & Lu, Qiang, 2024. "Investment risk assessment of anaerobic fermentation based hydrogen production project based on regret linguistic Z-number averaging Choquet integral operator," Renewable Energy, Elsevier, vol. 227(C).
    6. Dovichi Filho, Fernando Bruno & Lora, Electo Eduardo Silva & Palacio, Jose Carlos Escobar & Venturini, Osvaldo José & Jaén, René Lesme, 2023. "An approach to technology selection in bioelectricity technical potential assessment: A Brazilian case study," Energy, Elsevier, vol. 272(C).
    7. İncili, Veysel & Karaca Dolgun, Gülşah & Keçebaş, Ali & Ural, Tolga, 2023. "Energy and exergy analyses of a coal-fired micro-CHP system coupled engine as a domestic solution," Energy, Elsevier, vol. 274(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bartela, Łukasz & Kotowicz, Janusz & Remiorz, Leszek & Skorek-Osikowska, Anna & Dubiel, Klaudia, 2017. "Assessment of the economic appropriateness of the use of Stirling engine as additional part of a cogeneration system based on biomass gasification," Renewable Energy, Elsevier, vol. 112(C), pages 425-443.
    2. Remiorz, Leszek & Kotowicz, Janusz & Uchman, Wojciech, 2018. "Comparative assessment of the effectiveness of a free-piston Stirling engine-based micro-cogeneration unit and a heat pump," Energy, Elsevier, vol. 148(C), pages 134-147.
    3. Zhu, Shunmin & Yu, Guoyao & Liang, Kun & Dai, Wei & Luo, Ercang, 2021. "A review of Stirling-engine-based combined heat and power technology," Applied Energy, Elsevier, vol. 294(C).
    4. Elsner, Witold & Wysocki, Marian & Niegodajew, Paweł & Borecki, Roman, 2017. "Experimental and economic study of small-scale CHP installation equipped with downdraft gasifier and internal combustion engine," Applied Energy, Elsevier, vol. 202(C), pages 213-227.
    5. Skorek-Osikowska, Anna & Kotowicz, Janusz & Uchman, Wojciech, 2017. "Thermodynamic assessment of the operation of a self-sufficient, biomass based district heating system integrated with a Stirling engine and biomass gasification," Energy, Elsevier, vol. 141(C), pages 1764-1778.
    6. Gianluca Valenti & Aldo Bischi & Stefano Campanari & Paolo Silva & Antonino Ravidà & Ennio Macchi, 2021. "Experimental and Numerical Study of a Microcogeneration Stirling Unit under On–Off Cycling Operation," Energies, MDPI, vol. 14(4), pages 1-14, February.
    7. Zhu, Shunmin & Yu, Guoyao & O, Jongmin & Xu, Tao & Wu, Zhanghua & Dai, Wei & Luo, Ercang, 2018. "Modeling and experimental investigation of a free-piston Stirling engine-based micro-combined heat and power system," Applied Energy, Elsevier, vol. 226(C), pages 522-533.
    8. Skorek-Osikowska, Anna & Bartela, Łukasz & Kotowicz, Janusz & Sobolewski, Aleksander & Iluk, Tomasz & Remiorz, Leszek, 2014. "The influence of the size of the CHP (combined heat and power) system integrated with a biomass fueled gas generator and piston engine on the thermodynamic and economic effectiveness of electricity an," Energy, Elsevier, vol. 67(C), pages 328-340.
    9. Kotowicz, Janusz & Węcel, Daniel & Jurczyk, Michał, 2018. "Analysis of component operation in power-to-gas-to-power installations," Applied Energy, Elsevier, vol. 216(C), pages 45-59.
    10. Jia, Junxi & Shu, Lingyun & Zang, Guiyan & Xu, Lijun & Abudula, Abuliti & Ge, Kun, 2018. "Energy analysis and techno-economic assessment of a co-gasification of woody biomass and animal manure, solid oxide fuel cells and micro gas turbine hybrid system," Energy, Elsevier, vol. 149(C), pages 750-761.
    11. Kotowicz, Janusz & Michalski, Sebastian, 2015. "Influence of four-end HTM (high temperature membrane) parameters on the thermodynamic and economic characteristics of a supercritical power plant," Energy, Elsevier, vol. 81(C), pages 662-673.
    12. Wojciech Uchman & Janusz Kotowicz & Leszek Remiorz, 2020. "An Experimental Data-Driven Model of a Micro-Cogeneration Installation for Time-Domain Simulation and System Analysis," Energies, MDPI, vol. 13(11), pages 1-26, June.
    13. Du, Shilin & Shu, Rui & Guo, Feiqiang & Mao, Songbo & Bai, Jiaming & Qian, Lin & Xin, Chengyun, 2022. "Porous coal char-based catalyst from coal gangue and lignite with high metal contents in the catalytic cracking of biomass tar," Energy, Elsevier, vol. 249(C).
    14. Teng, Su & Hamrang, Farzad & Ashraf Talesh, Seyed Saman, 2021. "Economic performance assessment of a novel combined power generation cycle," Energy, Elsevier, vol. 231(C).
    15. Perkins, Greg & Bhaskar, Thallada & Konarova, Muxina, 2018. "Process development status of fast pyrolysis technologies for the manufacture of renewable transport fuels from biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 292-315.
    16. Bai, Zhang & Gu, Yucheng & Wang, Shuoshuo & Jiang, Tieliu & Kong, Debin & Li, Qi, 2023. "Applying the solar solid particles as heat carrier to enhance the solar-driven biomass gasification with dynamic operation power generation performance analysis," Applied Energy, Elsevier, vol. 351(C).
    17. Bataineh, Khaled, 2024. "Hybrid fuel-assisted solar-powered stirling engine for combined cooling, heating, and power systems: A review," Energy, Elsevier, vol. 300(C).
    18. Pantaleo, Antonio M. & Camporeale, Sergio M. & Sorrentino, Arianna & Miliozzi, Adio & Shah, Nilay & Markides, Christos N., 2020. "Hybrid solar-biomass combined Brayton/organic Rankine-cycle plants integrated with thermal storage: Techno-economic feasibility in selected Mediterranean areas," Renewable Energy, Elsevier, vol. 147(P3), pages 2913-2931.
    19. Luo, Baojun & Xiang, Quanwei & Su, Xiaoxue & Zhang, Shunfeng & Yan, Piaopiao & Liu, Jingping & Li, Ruijie, 2024. "A novel cycle engine for low-grade heat utilization: Principle, conceptual design and thermodynamic analysis," Energy, Elsevier, vol. 301(C).
    20. Janusz Kotowicz & Sebastian Michalski & Mateusz Brzęczek, 2019. "The Characteristics of a Modern Oxy-Fuel Power Plant," Energies, MDPI, vol. 12(17), pages 1-34, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:150:y:2018:i:c:p:601-616. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.