IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v195y2020ics0360544220301158.html
   My bibliography  Save this article

Exergetic sustainability off-design analysis of variable-cycle aero-engine in various bypass modes

Author

Listed:
  • Aygun, Hakan
  • Turan, Onder

Abstract

For next generation aircraft, Variable Cycle Engine (VCE) is a candidate to fulfil the multi-mission requirements of flight. This new concept is promising to complete deficiencies of conventional low by-pass mixed turbofan engines because the VCE model incorporates different thermodynamic cycles (turbojet and turbofan) on the same system. Namely, having single by-pass (SBM) and double by-pass modes (DBM), these engines can modulate by-pass ratio, ranging from 0.3 to 1.8 during flight with respect to operating condition requirements. In this study, parametric equations for components of the developed VCE model are determined by means of cycle equations of a mixed-flow turbofan with afterburner. The first aim is to compare energetic performance results of the developed VCE with the results of F100-PW-100 (as called F100) used on F-15 or F-16 for SBM and DBM. Secondly, the main goal of this study is to perform second law analysis for the VCE model and compare it with the results of the F100 engine for off-design, at which flight altitude (9–20 km) and Mach number (0.3–1.9) changes. For this aim, thermodynamic data (pressure, temperature, mass flow etc.) of this engine main components are obtained from GasTurb program for above stated flight conditions. On the other hand, exergy analysis along with five sustainability parameters is carried out at SBM and DBM as comparing with those of F100 engine. Off-design analysis shows that the specific fuel consumption (SFC) varies from 19.97 g/kN.s to 28.25 g/kN.s for VCE and from 23.91 g/kN.s to 31.14 g/kN.s for F100 at DBM. Moreover, at SBM, SFC changes from 52.68 g/kN.s to 59.19 g/kN.s for VCE and from 58.04 g/kN.s to 63.57 g/kN.s for F100 throughout the entire flight conditions. As for exergy-based sustainability analysis, exergetic sustainability index (ESI) of the whole VCE is found to be in the range of 0.14 and 0.51 for DBM and to be in the range of 0.26 and 0.38 for SBM. For F100 engine, ESI is calculated to be in the range of 0.10 and 0.39 for DBM and to be in the range of 0.15 and 0.34 for SBM. It is thought that this study can help in understanding the effect of the working cycle on engine performance and sustainability parameters.

Suggested Citation

  • Aygun, Hakan & Turan, Onder, 2020. "Exergetic sustainability off-design analysis of variable-cycle aero-engine in various bypass modes," Energy, Elsevier, vol. 195(C).
    • Handle: RePEc:eee:energy:v:195:y:2020:i:c:s0360544220301158
    DOI: 10.1016/j.energy.2020.117008
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220301158
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117008?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Şöhret, Yasin & Dinç, Ali & Karakoç, T. Hikmet, 2015. "Exergy analysis of a turbofan engine for an unmanned aerial vehicle during a surveillance mission," Energy, Elsevier, vol. 93(P1), pages 716-729.
    2. Turan, Onder, 2012. "Exergetic effects of some design parameters on the small turbojet engine for unmanned air vehicle applications," Energy, Elsevier, vol. 46(1), pages 51-61.
    3. Dincer, I. & Hussain, M. M. & Al-Zaharnah, I., 2004. "Energy and exergy use in public and private sector of Saudi Arabia," Energy Policy, Elsevier, vol. 32(14), pages 1615-1624, September.
    4. Aydın, Hakan & Turan, Önder & Karakoç, T. Hikmet & Midilli, Adnan, 2013. "Exergo-sustainability indicators of a turboprop aircraft for the phases of a flight," Energy, Elsevier, vol. 58(C), pages 550-560.
    5. Hepbasli, Arif, 2008. "A key review on exergetic analysis and assessment of renewable energy resources for a sustainable future," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(3), pages 593-661, April.
    6. Turan, Önder & Aydın, Hakan, 2016. "Numerical calculation of energy and exergy flows of a turboshaft engine for power generation and helicopter applications," Energy, Elsevier, vol. 115(P1), pages 914-923.
    7. Aydin, Hakan, 2013. "Exergetic sustainability analysis of LM6000 gas turbine power plant with steam cycle," Energy, Elsevier, vol. 57(C), pages 766-774.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Balli, Ozgur & Caliskan, Hakan, 2021. "Turbofan engine performances from aviation, thermodynamic and environmental perspectives," Energy, Elsevier, vol. 232(C).
    2. Aygun, Hakan & Turan, Onder, 2023. "Analysis of cruise conditions on energy, exergy and NOx emission parameters of a turbofan engine for middle-range aircraft," Energy, Elsevier, vol. 267(C).
    3. Atilgan, Ramazan & Onder Turan,, 2020. "Economy and exergy of aircraft turboprop engine at dynamic loads," Energy, Elsevier, vol. 213(C).
    4. Aygun, Hakan, 2022. "Thermodynamic, environmental and sustainability calculations of a conceptual turboshaft engine under several power settings," Energy, Elsevier, vol. 245(C).
    5. Aygun, Hakan & Kirmizi, Mehmet & Turan, Onder, 2022. "Propeller effects on energy, exergy and sustainability parameters of a small turboprop engine," Energy, Elsevier, vol. 249(C).
    6. Aygun, Hakan & Kirmizi, Mehmet & Kilic, Ulas & Turan, Onder, 2023. "Multi-objective optimization of a small turbojet engine energetic performance," Energy, Elsevier, vol. 271(C).
    7. Karabacak, Mustafa & Kirmizi, Mehmet & Aygun, Hakan & Turan, Onder, 2023. "Application of exergetic analysis to inverted Brayton cycle engine at different flight conditions," Energy, Elsevier, vol. 283(C).
    8. Ekici, Selcuk & Ayar, Murat & Hikmet Karakoc, T., 2023. "Fuel-saving and emission accounting: An airliner case study for green engine selection," Energy, Elsevier, vol. 282(C).
    9. Aygun, Hakan & Turan, Onder, 2022. "Application of genetic algorithm in exergy and sustainability: A case of aero-gas turbine engine at cruise phase," Energy, Elsevier, vol. 238(PA).
    10. Jia, Xingyun & Zhou, Dengji, 2024. "Multi-variable anti-disturbance controller with state-dependent switching law for adaptive cycle engine," Energy, Elsevier, vol. 288(C).
    11. Konur, Olgun & Yuksel, Onur & Aykut Korkmaz, S. & Ozgur Colpan, C. & Saatcioglu, Omur Y. & Koseoglu, Burak, 2023. "Operation-dependent exergetic sustainability assessment and environmental analysis on a large tanker ship utilizing Organic Rankine cycle system," Energy, Elsevier, vol. 262(PA).
    12. Luo, Qiaodan & Zhao, Shengfeng & Zhou, Shiji & Yao, Lipan & Yang, Chengwu & Lu, Xingen & Zhu, Junqiang, 2024. "Influence of diversified dihedral stator on the thermodynamic performance and flow loss characteristics of a variable core driven fan stage," Energy, Elsevier, vol. 294(C).
    13. Wang, Busheng & Xuan, Yimin, 2023. "An integrated model for energy management of aero engines based on thermodynamic principle of variable mass systems," Energy, Elsevier, vol. 276(C).
    14. Aygun, Hakan & Cilgin, Mehmet Emin & Turan, Onder, 2021. "Exergo-sustainability indicators of a target drone engine at dynamic loads," Energy, Elsevier, vol. 221(C).
    15. Pang, Liping & Ma, Desheng & Luo, Kun & Mao, Xiaodong & Yuan, Yanping, 2022. "Performance of an Integrated Thermal Management System for helicopter," Energy, Elsevier, vol. 239(PD).
    16. Cai, Changpeng & Wang, Yong & Fang, Juan & Chen, Haoying & Zheng, Qiangang & Zhang, Haibo, 2023. "Multiple aspects to flight mission performances improvement of commercial turbofan engine via variable geometry adjustment," Energy, Elsevier, vol. 263(PA).
    17. Laihe Zhuang & Guoqiang Xu & Bensi Dong & Qihang Liu & Mengchen Li & Jie Wen, 2022. "Exergetic Effects of Cooled Cooling Air Technology on the Turbofan Engine during a Typical Mission," Energies, MDPI, vol. 15(14), pages 1-25, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Aygun, Hakan & Cilgin, Mehmet Emin & Turan, Onder, 2021. "Exergo-sustainability indicators of a target drone engine at dynamic loads," Energy, Elsevier, vol. 221(C).
    2. Aygun, Hakan & Turan, Onder, 2021. "Exergo-economic analysis of off-design a target drone engine for reconnaissance mission flight," Energy, Elsevier, vol. 224(C).
    3. Aygun, Hakan & Erkara, Seref & Turan, Onder, 2022. "Comprehensive exergo- sustainability analysis for a next generation aero engine," Energy, Elsevier, vol. 239(PD).
    4. Turan, Onder, 2015. "An exergy way to quantify sustainability metrics for a high bypass turbofan engine," Energy, Elsevier, vol. 86(C), pages 722-736.
    5. Turan, Önder & Aydın, Hakan, 2016. "Numerical calculation of energy and exergy flows of a turboshaft engine for power generation and helicopter applications," Energy, Elsevier, vol. 115(P1), pages 914-923.
    6. Baklacioglu, Tolga & Turan, Onder & Aydin, Hakan, 2015. "Dynamic modeling of exergy efficiency of turboprop engine components using hybrid genetic algorithm-artificial neural networks," Energy, Elsevier, vol. 86(C), pages 709-721.
    7. Turan, Onder & Aydin, Hakan, 2014. "Exergetic and exergo-economic analyses of an aero-derivative gas turbine engine," Energy, Elsevier, vol. 74(C), pages 638-650.
    8. Yurdusevimli Metin, Ece & Aygün, Hakan, 2019. "Energy and power aspects of an experimental target drone engine at non-linear controller loads," Energy, Elsevier, vol. 185(C), pages 981-993.
    9. Ahmadi, Mohammad H. & Amin Nabakhteh, Mohammad & Ahmadi, Mohammad-Ali & Pourfayaz, Fathollah & Bidi, Mokhtar, 2017. "Investigation and optimization of performance of nano-scale Stirling refrigerator using working fluid as Maxwell–Boltzmann gases," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 483(C), pages 337-350.
    10. Ziya Sogut, M., 2021. "New approach for assessment of environmental effects based on entropy optimization of jet engine," Energy, Elsevier, vol. 234(C).
    11. Aygun, Hakan & Kirmizi, Mehmet & Turan, Onder, 2022. "Propeller effects on energy, exergy and sustainability parameters of a small turboprop engine," Energy, Elsevier, vol. 249(C).
    12. Yucer, Cem Tahsin, 2016. "Thermodynamic analysis of the part load performance for a small scale gas turbine jet engine by using exergy analysis method," Energy, Elsevier, vol. 111(C), pages 251-259.
    13. Naili, Nabiha & Hazami, Majdi & Attar, Issam & Farhat, Abdelhamid, 2013. "In-field performance analysis of ground source cooling system with horizontal ground heat exchanger in Tunisia," Energy, Elsevier, vol. 61(C), pages 319-331.
    14. Ekici, Selcuk, 2020. "Thermodynamic mapping of A321-200 in terms of performance parameters, sustainability indicators and thermo-ecological performance at various flight phases," Energy, Elsevier, vol. 202(C).
    15. Coban, Kahraman & Şöhret, Yasin & Colpan, C. Ozgur & Karakoç, T. Hikmet, 2017. "Exergetic and exergoeconomic assessment of a small-scale turbojet fuelled with biodiesel," Energy, Elsevier, vol. 140(P2), pages 1358-1367.
    16. Xydis, G. & Koroneos, C. & Loizidou, M., 2009. "Exergy analysis in a wind speed prognostic model as a wind farm sitting selection tool: A case study in Southern Greece," Applied Energy, Elsevier, vol. 86(11), pages 2411-2420, November.
    17. Aygun, Hakan & Turan, Onder, 2022. "Application of genetic algorithm in exergy and sustainability: A case of aero-gas turbine engine at cruise phase," Energy, Elsevier, vol. 238(PA).
    18. Koruyucu, Elif, 2019. "Energy and exergy analysis at different hybridization factors for hybrid electric propulsion light utility helicopter engine," Energy, Elsevier, vol. 189(C).
    19. Syamimi Saadon & Nur Athirah Mohd Nasir, 2020. "Performance and Sustainability Analysis of an Organic Rankine Cycle System in Subcritical and Supercritical Conditions for Waste Heat Recovery," Energies, MDPI, vol. 13(12), pages 1-24, June.
    20. Açıkkalp, Emin, 2015. "Exergetic sustainability evaluation of irreversible Carnot refrigerator," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 436(C), pages 311-320.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:195:y:2020:i:c:s0360544220301158. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.