IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v194y2020ics0360544219325678.html
   My bibliography  Save this article

A numerical study on discrete combustion of polydisperse magnesium aero-suspensions

Author

Listed:
  • Bozorg, Mehdi Vahabzadeh
  • Doranehgard, Mohammad Hossein
  • Hong, Kun
  • Xiong, Qingang
  • Li, Larry K.B.

Abstract

In this numerical study, discrete combustion of polydisperse magnesium dust clouds was investigated. A numerical model accounting for the effects of ignition, thermal conduction, and radiation was formulated to simulate the spatiotemporal distribution of temperature. Three distribution models, i.e., Dagum, log-normal, and Beta prime, were used to describe the magnesium particle-size polydispersity. The numerical model was first validated by comparison against experimental data on discrete combustion of both mono-sized and polydisperse magnesium aero-suspensions. Subsequently, the flame propagation characteristics of mono-sized and log-normally polydisperse cases at two different mean magnesium particle sizes were compared. The comparison shows that polydisperse magnesium dust clouds have higher flame propagation speeds than their mono-sized counterparts. Finally, the differences among the polydisperse cases with different size distributions were compared, revealing that magnesium powders with a higher percentage of small particles give rise to higher flame propagation speeds. Furthermore, results show that in comparison with the Dagum and Beta prime distributions, the log-normal distribution results in a lower flame propagation speed and a higher minimum ignition energy. As either the particle size decreases or the dust-cloud concentration increases, the flame propagation speed increases and the minimum ignition energy decreases.

Suggested Citation

  • Bozorg, Mehdi Vahabzadeh & Doranehgard, Mohammad Hossein & Hong, Kun & Xiong, Qingang & Li, Larry K.B., 2020. "A numerical study on discrete combustion of polydisperse magnesium aero-suspensions," Energy, Elsevier, vol. 194(C).
    • Handle: RePEc:eee:energy:v:194:y:2020:i:c:s0360544219325678
    DOI: 10.1016/j.energy.2019.116872
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219325678
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116872?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Camilo Dagum, 2008. "A New Model of Personal Income Distribution: Specification and Estimation," Economic Studies in Inequality, Social Exclusion, and Well-Being, in: Duangkamon Chotikapanich (ed.), Modeling Income Distributions and Lorenz Curves, chapter 1, pages 3-25, Springer.
    2. Bergthorson, Jeffrey M. & Yavor, Yinon & Palecka, Jan & Georges, William & Soo, Michael & Vickery, James & Goroshin, Samuel & Frost, David L. & Higgins, Andrew J., 2017. "Metal-water combustion for clean propulsion and power generation," Applied Energy, Elsevier, vol. 186(P1), pages 13-27.
    3. Bergthorson, J.M. & Goroshin, S. & Soo, M.J. & Julien, P. & Palecka, J. & Frost, D.L. & Jarvis, D.J., 2015. "Direct combustion of recyclable metal fuels for zero-carbon heat and power," Applied Energy, Elsevier, vol. 160(C), pages 368-382.
    4. Bidabadi, Mehdi & Bozorg, Mehdi Vahabzadeh & Bordbar, Vahid, 2017. "A three-dimensional simulation of discrete combustion of randomly dispersed micron-aluminum particle dust cloud and applying genetic algorithm to obtain the flame front," Energy, Elsevier, vol. 140(P1), pages 804-817.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Bozorg, Mehdi Vahabzadeh & Guan, Yu & Doranehgard, Mohammad Hossein & Hong, Kun & Xiong, Qingang & Karimi, Nader & Li, Larry K.B., 2020. "Numerical simulation of the heterogeneous combustion of dust clouds containing polydisperse porous iron particles," Energy, Elsevier, vol. 212(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Janicka, J. & Debiagi, P. & Scholtissek, A. & Dreizler, A. & Epple, B. & Pawellek, R. & Maltsev, A. & Hasse, C., 2023. "The potential of retrofitting existing coal power plants: A case study for operation with green iron," Applied Energy, Elsevier, vol. 339(C).
    2. Trowell, K.A. & Goroshin, S. & Frost, D.L. & Bergthorson, J.M., 2020. "Aluminum and its role as a recyclable, sustainable carrier of renewable energy," Applied Energy, Elsevier, vol. 275(C).
    3. Debiagi, P. & Rocha, R.C. & Scholtissek, A. & Janicka, J. & Hasse, C., 2022. "Iron as a sustainable chemical carrier of renewable energy: Analysis of opportunities and challenges for retrofitting coal-fired power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    4. Maas, Pascal & Schiemann, Martin & Scherer, Viktor & Fischer, Peter & Taroata, Dan & Schmid, Günther, 2018. "Lithium as energy carrier: CFD simulations of LI combustion in a 100MW slag tap furnace," Applied Energy, Elsevier, vol. 227(C), pages 506-515.
    5. Neumann, Jannik & Fradet, Quentin & Scholtissek, Arne & Dammel, Frank & Riedel, Uwe & Dreizler, Andreas & Hasse, Christian & Stephan, Peter, 2024. "Thermodynamic assessment of an iron-based circular energy economy for carbon-free power supply," Applied Energy, Elsevier, vol. 368(C).
    6. Mohammadmahdi Sohrabi & Barat Ghobadian & Gholamhassan Najafi & Willie Prasidha & Mohammadreza Baigmohammadi & Philip de Goey, 2024. "Experimental and Statistical Analysis of Iron Powder for Green Heat Production," Sustainability, MDPI, vol. 16(21), pages 1-15, October.
    7. Kang, Dohyung & Lim, Hyun Suk & Lee, Minbeom & Lee, Jae W., 2018. "Syngas production on a Ni-enhanced Fe2O3/Al2O3 oxygen carrier via chemical looping partial oxidation with dry reforming of methane," Applied Energy, Elsevier, vol. 211(C), pages 174-186.
    8. Yuan, Yupeng & Wang, Jixiang & Yan, Xinping & Shen, Boyang & Long, Teng, 2020. "A review of multi-energy hybrid power system for ships," Renewable and Sustainable Energy Reviews, Elsevier, vol. 132(C).
    9. Chao Jin & Xiaodan Li & Teng Xu & Juntong Dong & Zhenlong Geng & Jia Liu & Chenyun Ding & Jingjing Hu & Ahmed El ALAOUI & Qing Zhao & Haifeng Liu, 2023. "Zero-Carbon and Carbon-Neutral Fuels: A Review of Combustion Products and Cytotoxicity," Energies, MDPI, vol. 16(18), pages 1-29, September.
    10. Ivana Malá, 2013. "Použití konečných směsí logaritmicko-normálních rozdělení pro modelování příjmů českých domácností [The Use of Finite Mixtures of Lognormal Distribution for the Modelling of Household Income Distri," Politická ekonomie, Prague University of Economics and Business, vol. 2013(3), pages 356-372.
    11. Christopher C. Hadlock & J. Eric Bickel, 2017. "Johnson Quantile-Parameterized Distributions," Decision Analysis, INFORMS, vol. 14(1), pages 35-64, March.
    12. Choi, Dongho & Oh, Jeong-Ik & Baek, Kitae & Lee, Jechan & Kwon, Eilhann E., 2018. "Compositional modification of products from Co-Pyrolysis of chicken manure and biomass by shifting carbon distribution from pyrolytic oil to syngas using CO2," Energy, Elsevier, vol. 153(C), pages 530-538.
    13. Bidabadi, Mehdi & Bozorg, Mehdi Vahabzadeh & Bordbar, Vahid, 2017. "A three-dimensional simulation of discrete combustion of randomly dispersed micron-aluminum particle dust cloud and applying genetic algorithm to obtain the flame front," Energy, Elsevier, vol. 140(P1), pages 804-817.
    14. Bergthorson, Jeffrey M. & Yavor, Yinon & Palecka, Jan & Georges, William & Soo, Michael & Vickery, James & Goroshin, Samuel & Frost, David L. & Higgins, Andrew J., 2017. "Metal-water combustion for clean propulsion and power generation," Applied Energy, Elsevier, vol. 186(P1), pages 13-27.
    15. Bennett, Carly & Blanchet, Jocelyn & Trowell, Keena & Bergthorson, Jeffrey, 2023. "Decarbonizing Canada’s energy supply and exports with solar PV and e-fuels," Renewable Energy, Elsevier, vol. 217(C).
    16. Oruc, Onur & Dincer, Ibrahim, 2021. "Development and performance assessment power generating systems using clean hydrogen," Energy, Elsevier, vol. 215(PB).
    17. Dehhaghi, Mona & Kazemi Shariat Panahi, Hamed & Aghbashlo, Mortaza & Lam, Su Shiung & Tabatabaei, Meisam, 2021. "The effects of nanoadditives on the performance and emission characteristics of spark-ignition gasoline engines: A critical review with a focus on health impacts," Energy, Elsevier, vol. 225(C).
    18. Julien Pedneault & Guillaume Majeau‐Bettez & Manuele Margni, 2023. "How much sorting is required for a circular low carbon aluminum economy?," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 977-992, June.
    19. Boccanfuso, Dorothée & Richard, Patrick & Savard, Luc, 2013. "Parametric and nonparametric income distribution estimators in CGE micro-simulation modeling," Economic Modelling, Elsevier, vol. 35(C), pages 892-899.
    20. Schiemann, Martin & Bergthorson, Jeffrey & Fischer, Peter & Scherer, Viktor & Taroata, Dan & Schmid, Günther, 2016. "A review on lithium combustion," Applied Energy, Elsevier, vol. 162(C), pages 948-965.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:194:y:2020:i:c:s0360544219325678. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.